From: Glauber de Oliveira Costa <gcosta@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: akpm@linux-foundation.org, glommer@gmail.com, tglx@linutronix.de,
mingo@elte.hu, ehabkost@redhat.com, jeremy@goop.org,
avi@qumranet.com, anthony@codemonkey.ws,
virtualization@lists.linux-foundation.org, rusty@rustcorp.com.au,
ak@suse.de, chrisw@sous-sol.org, rostedt@goodmis.org,
hpa@zytor.com, zach@vmware.com, roland@redhat.com,
Glauber de Oliveira Costa <gcosta@redhat.com>
Subject: [PATCH] avoid ifdefs in desc.h, getting rid of pack_ldt and pack_tss
Date: Thu, 13 Dec 2007 12:29:31 -0200 [thread overview]
Message-ID: <11975561713425-git-send-email-gcosta@redhat.com> (raw)
By Andi Kleen's suggestion, this patch removes pack_ldt() and pack_tss()
wrappers in favour of a general wrapper. It saves us an ifdef and some lines
of code, but more importantly, it's more elegant.
No functional change is made.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
---
include/asm-x86/desc.h | 55 ++++++++++++++---------------------------------
1 files changed, 17 insertions(+), 38 deletions(-)
diff --git a/include/asm-x86/desc.h b/include/asm-x86/desc.h
index 8849666..e302a02 100644
--- a/include/asm-x86/desc.h
+++ b/include/asm-x86/desc.h
@@ -125,21 +125,6 @@ static inline void native_write_gdt_entry(struct desc_struct *gdt, int entry,
memcpy(&gdt[entry], desc, size);
}
-static inline void set_tssldt_descriptor(struct ldttss_desc64 *d,
- unsigned long tss, unsigned type,
- unsigned size)
-{
- memset(d, 0, sizeof(*d));
- d->limit0 = size & 0xFFFF;
- d->base0 = PTR_LOW(tss);
- d->base1 = PTR_MIDDLE(tss) & 0xFF;
- d->type = type;
- d->p = 1;
- d->limit1 = (size >> 16) & 0xF;
- d->base2 = (PTR_MIDDLE(tss) >> 8) & 0xFF;
- d->base3 = PTR_HIGH(tss);
-}
-
static inline void pack_descriptor(struct desc_struct *desc, unsigned long base,
unsigned long limit, unsigned char type,
unsigned char flags)
@@ -151,30 +136,24 @@ static inline void pack_descriptor(struct desc_struct *desc, unsigned long base,
desc->p = 1;
}
-static inline void pack_ldt(ldt_desc *ldt, unsigned long addr,
- unsigned size)
-{
-#ifdef CONFIG_X86_64
- set_tssldt_descriptor(ldt,
- addr, DESC_LDT, size);
-#else
- pack_descriptor(ldt, (unsigned long)addr,
- size,
- 0x80 | DESC_LDT, 0);
-#endif
-}
-
-static inline void pack_tss(tss_desc *tss, unsigned long addr,
- unsigned size, unsigned entry)
+static inline void set_tssldt_descriptor(void *d, unsigned long addr,
+ unsigned type, unsigned size)
{
#ifdef CONFIG_X86_64
- set_tssldt_descriptor(tss,
- addr, entry, size);
+ struct ldttss_desc64 *desc = d;
+ memset(desc, 0, sizeof(*desc));
+ desc->limit0 = size & 0xFFFF;
+ desc->base0 = PTR_LOW(addr);
+ desc->base1 = PTR_MIDDLE(addr) & 0xFF;
+ desc->type = type;
+ desc->p = 1;
+ desc->limit1 = (size >> 16) & 0xF;
+ desc->base2 = (PTR_MIDDLE(addr) >> 8) & 0xFF;
+ desc->base3 = PTR_HIGH(addr);
#else
- pack_descriptor(tss, (unsigned long)addr,
- size,
- 0x80 | entry, 0);
+
+ pack_descriptor((struct desc_struct *)d, addr, size, 0x80 | type, 0);
#endif
}
@@ -190,7 +169,7 @@ static inline void __set_tss_desc(unsigned cpu, unsigned int entry, void *addr)
* -1? seg base+limit should be pointing to the address of the
* last valid byte
*/
- pack_tss(&tss, (unsigned long)addr,
+ set_tssldt_descriptor(&tss, (unsigned long)addr,
IO_BITMAP_OFFSET + IO_BITMAP_BYTES + sizeof(unsigned long) - 1,
DESC_TSS);
write_gdt_entry(d, entry, &tss, DESC_TSS);
@@ -206,8 +185,8 @@ static inline void native_set_ldt(const void *addr, unsigned int entries)
unsigned cpu = smp_processor_id();
ldt_desc ldt;
- pack_ldt(&ldt, (unsigned long)addr,
- entries * sizeof(ldt) - 1);
+ set_tssldt_descriptor(&ldt, (unsigned long)addr,
+ DESC_LDT, entries * sizeof(ldt) - 1);
write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_LDT,
&ldt, DESC_LDT);
__asm__ __volatile__("lldt %w0"::"q" (GDT_ENTRY_LDT*8));
--
1.4.4.2
next reply other threads:[~2007-12-13 17:13 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-13 14:29 Glauber de Oliveira Costa [this message]
2007-12-13 20:28 ` [PATCH] avoid ifdefs in desc.h, getting rid of pack_ldt and pack_tss Ingo Molnar
2007-12-13 20:58 ` Ingo Molnar
2007-12-13 21:22 ` Ingo Molnar
2007-12-13 21:26 ` H. Peter Anvin
2007-12-13 21:35 ` Ingo Molnar
2007-12-13 21:40 ` H. Peter Anvin
2007-12-13 21:51 ` Glauber de Oliveira Costa
2007-12-13 21:37 ` Tom Spink
2007-12-13 21:40 ` Glauber de Oliveira Costa
-- strict thread matches above, loose matches on Subject: below --
2007-12-13 19:25 Glauber de Oliveira Costa
2007-12-14 10:43 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11975561713425-git-send-email-gcosta@redhat.com \
--to=gcosta@redhat.com \
--cc=ak@suse.de \
--cc=akpm@linux-foundation.org \
--cc=anthony@codemonkey.ws \
--cc=avi@qumranet.com \
--cc=chrisw@sous-sol.org \
--cc=ehabkost@redhat.com \
--cc=glommer@gmail.com \
--cc=hpa@zytor.com \
--cc=jeremy@goop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=roland@redhat.com \
--cc=rostedt@goodmis.org \
--cc=rusty@rustcorp.com.au \
--cc=tglx@linutronix.de \
--cc=virtualization@lists.linux-foundation.org \
--cc=zach@vmware.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox