From: Joe Perches <joe@perches.com>
To: linux-kernel@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>,
Greg Ungerer <gerg@uclinux.org>
Subject: [PATCH] include/asm-m68knommu/: Spelling fixes
Date: Mon, 17 Dec 2007 11:40:23 -0800 [thread overview]
Message-ID: <1197920439-5455-17-git-send-email-joe@perches.com> (raw)
Message-ID: <5703e57f925f31fc0eb38873bd7f10fc44f99cb4.1197918893.git.joe@perches.com> (raw)
Signed-off-by: Joe Perches <joe@perches.com>
---
include/asm-m68knommu/bitops.h | 2 +-
include/asm-m68knommu/commproc.h | 2 +-
include/asm-m68knommu/delay.h | 2 +-
include/asm-m68knommu/m5249sim.h | 4 ++--
include/asm-m68knommu/m5307sim.h | 12 ++++++------
include/asm-m68knommu/m5407sim.h | 12 ++++++------
include/asm-m68knommu/m68360_regs.h | 2 +-
include/asm-m68knommu/mcfuart.h | 2 +-
8 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/include/asm-m68knommu/bitops.h b/include/asm-m68knommu/bitops.h
index f8dfb7b..89b928f 100644
--- a/include/asm-m68knommu/bitops.h
+++ b/include/asm-m68knommu/bitops.h
@@ -262,7 +262,7 @@ static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned lon
* tmp = __swab32(*(p++));
* tmp |= ~0UL >> (32-offset);
*
- * but this would decrease preformance, so we change the
+ * but this would decrease performance, so we change the
* shift:
*/
tmp = *(p++);
diff --git a/include/asm-m68knommu/commproc.h b/include/asm-m68knommu/commproc.h
index 0161ebb..36e870b 100644
--- a/include/asm-m68knommu/commproc.h
+++ b/include/asm-m68knommu/commproc.h
@@ -715,7 +715,7 @@ extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id);
#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
-#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrrupt */
+#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
#define CICR_IEN ((uint)0x00000080) /* Int. enable */
#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
diff --git a/include/asm-m68knommu/delay.h b/include/asm-m68knommu/delay.h
index 04a20fd..55cbd62 100644
--- a/include/asm-m68knommu/delay.h
+++ b/include/asm-m68knommu/delay.h
@@ -68,7 +68,7 @@ static inline void _udelay(unsigned long usecs)
/*
* Moved the udelay() function into library code, no longer inlined.
* I had to change the algorithm because we are overflowing now on
- * the faster ColdFire parts. The code is a little biger, so it makes
+ * the faster ColdFire parts. The code is a little bigger, so it makes
* sense to library it.
*/
extern void udelay(unsigned long usecs);
diff --git a/include/asm-m68knommu/m5249sim.h b/include/asm-m68knommu/m5249sim.h
index 399814f..366eb86 100644
--- a/include/asm-m68knommu/m5249sim.h
+++ b/include/asm-m68knommu/m5249sim.h
@@ -43,10 +43,10 @@
#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */
#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */
#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */
-#define MCFSIM_CSAR2 0x98 /* CS 2 Adress reg (r/w) */
+#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */
#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */
#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3 0xa4 /* CS 3 Adress reg (r/w) */
+#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */
#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */
#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */
diff --git a/include/asm-m68knommu/m5307sim.h b/include/asm-m68knommu/m5307sim.h
index d3ce550..5886728 100644
--- a/include/asm-m68knommu/m5307sim.h
+++ b/include/asm-m68knommu/m5307sim.h
@@ -64,22 +64,22 @@
#define MCFSIM_CSMR7 0xda /* CS 7 Mask reg (r/w) */
#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */
#else
-#define MCFSIM_CSAR2 0x98 /* CS 2 Adress reg (r/w) */
+#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */
#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */
#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3 0xa4 /* CS 3 Adress reg (r/w) */
+#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */
#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */
#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */
-#define MCFSIM_CSAR4 0xb0 /* CS 4 Adress reg (r/w) */
+#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */
#define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */
#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */
-#define MCFSIM_CSAR5 0xbc /* CS 5 Adress reg (r/w) */
+#define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */
#define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */
#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */
-#define MCFSIM_CSAR6 0xc8 /* CS 6 Adress reg (r/w) */
+#define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */
#define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */
#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */
-#define MCFSIM_CSAR7 0xd4 /* CS 7 Adress reg (r/w) */
+#define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */
#define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */
#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */
#endif /* CONFIG_OLDMASK */
diff --git a/include/asm-m68knommu/m5407sim.h b/include/asm-m68knommu/m5407sim.h
index 75dcdac..cc22c4a 100644
--- a/include/asm-m68knommu/m5407sim.h
+++ b/include/asm-m68knommu/m5407sim.h
@@ -48,22 +48,22 @@
#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */
#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */
-#define MCFSIM_CSAR2 0x98 /* CS 2 Adress reg (r/w) */
+#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */
#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */
#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3 0xa4 /* CS 3 Adress reg (r/w) */
+#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */
#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */
#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */
-#define MCFSIM_CSAR4 0xb0 /* CS 4 Adress reg (r/w) */
+#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */
#define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */
#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */
-#define MCFSIM_CSAR5 0xbc /* CS 5 Adress reg (r/w) */
+#define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */
#define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */
#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */
-#define MCFSIM_CSAR6 0xc8 /* CS 6 Adress reg (r/w) */
+#define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */
#define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */
#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */
-#define MCFSIM_CSAR7 0xd4 /* CS 7 Adress reg (r/w) */
+#define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */
#define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */
#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */
diff --git a/include/asm-m68knommu/m68360_regs.h b/include/asm-m68knommu/m68360_regs.h
index a3f8cc8..d57217c 100644
--- a/include/asm-m68knommu/m68360_regs.h
+++ b/include/asm-m68knommu/m68360_regs.h
@@ -138,7 +138,7 @@
#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */
-#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrrupt */
+#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
#define CICR_VBA_MASK ((uint)0x000000e0) /* Vector Base Address */
#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
diff --git a/include/asm-m68knommu/mcfuart.h b/include/asm-m68knommu/mcfuart.h
index 873d080..873876d 100644
--- a/include/asm-m68knommu/mcfuart.h
+++ b/include/asm-m68knommu/mcfuart.h
@@ -72,7 +72,7 @@ struct mcf_platform_uart {
#define MCFUART_UTB 0x0c /* Transmit Buffer (w) */
#define MCFUART_UIPCR 0x10 /* Input Port Change (r) */
#define MCFUART_UACR 0x10 /* Auxiliary Control (w) */
-#define MCFUART_UISR 0x14 /* Interrup Status (r) */
+#define MCFUART_UISR 0x14 /* Interrupt Status (r) */
#define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */
#define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */
#define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */
--
1.5.3.7.949.g2221a6
next prev reply other threads:[~2007-12-17 20:02 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <5703e57f925f31fc0eb38873bd7f10fc44f99cb4.1197918893.git.joe@perches.com>
2007-12-17 19:40 ` [PATCH] drivers/scsi/: Spelling fixes Joe Perches
2007-12-17 19:58 ` Mike Christie
2007-12-17 19:40 ` [PATCH] drivers/serial/: " Joe Perches
2007-12-17 19:40 ` [PATCH] drivers/spi/: " Joe Perches
2007-12-17 19:40 ` [PATCH] drivers/ssb/: " Joe Perches
2007-12-17 19:40 ` [PATCH] drivers/usb/: " Joe Perches
2007-12-17 19:40 ` [PATCH] drivers/video/: " Joe Perches
2007-12-17 19:40 ` [PATCH] drivers/watchdog/: " Joe Perches
2007-12-17 19:40 ` [PATCH] fs/: " Joe Perches
2007-12-17 19:40 ` [PATCH] include/asm-frv/: " Joe Perches
2007-12-17 19:40 ` Joe Perches [this message]
2007-12-24 11:04 ` [PATCH] include/asm-m68knommu/: " Greg Ungerer
2007-12-17 19:40 ` [PATCH] include/linux/: " Joe Perches
2007-12-17 21:56 ` [PATCH] drivers/scsi/: " Andrew Vasquez
2007-12-17 22:05 ` James Smart
2007-12-17 22:20 ` [PATCH] include/asm-frv/: " David Howells
2007-12-17 22:48 ` [PATCH] drivers/scsi/: " Darrick J. Wong
2007-12-18 2:27 ` David Somayajulu
2007-12-18 13:55 ` Salyzyn, Mark
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1197920439-5455-17-git-send-email-joe@perches.com \
--to=joe@perches.com \
--cc=akpm@linux-foundation.org \
--cc=gerg@uclinux.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox