[PATCH] include/asm-mips/: Spelling fixes

[PATCH] include/asm-mips/: Spelling fixes

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 include/asm-mips/mach-excite/excite_fpga.h  |    2 +-
 include/asm-mips/mach-wrppmc/mach-gt64120.h |    2 +-
 include/asm-mips/sgi/ip22.h                 |    2 +-
 include/asm-mips/sn/sn0/hubio.h             |    2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/include/asm-mips/mach-excite/excite_fpga.h b/include/asm-mips/mach-excite/excite_fpga.h
index 38fcda7..0a1ef69 100644
--- a/include/asm-mips/mach-excite/excite_fpga.h
+++ b/include/asm-mips/mach-excite/excite_fpga.h
@@ -3,7 +3,7 @@
 
 
 /**
- * Adress alignment of the individual FPGA bytes.
+ * Address alignment of the individual FPGA bytes.
  * The address arrangement of the individual bytes of the FPGA is two
  * byte aligned at the embedded MK2 platform.
  */
diff --git a/include/asm-mips/mach-wrppmc/mach-gt64120.h b/include/asm-mips/mach-wrppmc/mach-gt64120.h
index 00d8bf6..465234a 100644
--- a/include/asm-mips/mach-wrppmc/mach-gt64120.h
+++ b/include/asm-mips/mach-wrppmc/mach-gt64120.h
@@ -45,7 +45,7 @@
 #define GT_PCI_IO_SIZE	0x02000000UL
 
 /*
- * PCI interrupts will come in on either the INTA or INTD interrups lines,
+ * PCI interrupts will come in on either the INTA or INTD interrupts lines,
  * which are mapped to the #2 and #5 interrupt pins of the MIPS.  On our
  * boards, they all either come in on IntD or they all come in on IntA, they
  * aren't mixed. There can be numerous PCI interrupts, so we keep a list of the
diff --git a/include/asm-mips/sgi/ip22.h b/include/asm-mips/sgi/ip22.h
index f4981c4..c0501f9 100644
--- a/include/asm-mips/sgi/ip22.h
+++ b/include/asm-mips/sgi/ip22.h
@@ -15,7 +15,7 @@
 /*
  * These are the virtual IRQ numbers, we divide all IRQ's into
  * 'spaces', the 'space' determines where and how to enable/disable
- * that particular IRQ on an SGI machine. HPC DMA and MC DMA interrups
+ * that particular IRQ on an SGI machine. HPC DMA and MC DMA interrupts
  * are not supported this way. Driver is supposed to allocate HPC/MC
  * interrupt as shareable and then look to proper status bit (see
  * HAL2 driver). This will prevent many complications, trust me ;-)
diff --git a/include/asm-mips/sn/sn0/hubio.h b/include/asm-mips/sn/sn0/hubio.h
index ef91b33..0187895 100644
--- a/include/asm-mips/sn/sn0/hubio.h
+++ b/include/asm-mips/sn/sn0/hubio.h
@@ -338,7 +338,7 @@ typedef union io_perf_cnt {
 #define IIO_IFDR	0x400398	/* IOQ FIFO Depth */
 #define IIO_IIAP	0x4003a0	/* IIQ Arbitration Parameters */
 #define IIO_IMMR	IIO_IIAP
-#define IIO_ICMR	0x4003a8	/* CRB Managment Register */
+#define IIO_ICMR	0x4003a8	/* CRB Management Register */
 #define IIO_ICCR	0x4003b0	/* CRB Control Register */
 #define IIO_ICTO	0x4003b8	/* CRB Time Out Register */
 #define IIO_ICTP	0x4003c0	/* CRB Time Out Prescalar */
-- 
1.5.3.7.949.g2221a6

Re: [PATCH] include/asm-mips/: Spelling fixes

[Sergei Shtylyov]

Hello.

Joe Perches wrote:

> Signed-off-by: Joe Perches <joe@perches.com>

> diff --git a/include/asm-mips/mach-wrppmc/mach-gt64120.h b/include/asm-mips/mach-wrppmc/mach-gt64120.h
> index 00d8bf6..465234a 100644
> --- a/include/asm-mips/mach-wrppmc/mach-gt64120.h
> +++ b/include/asm-mips/mach-wrppmc/mach-gt64120.h
> @@ -45,7 +45,7 @@
>  #define GT_PCI_IO_SIZE	0x02000000UL
>  
>  /*
> - * PCI interrupts will come in on either the INTA or INTD interrups lines,
> + * PCI interrupts will come in on either the INTA or INTD interrupts lines,

    "interrupt" here.

WBR, Sergei

Re: [PATCH] include/asm-mips/: Spelling fixes

[Joe Perches]

On Mon, 2007-12-17 at 22:53 +0300, Sergei Shtylyov wrote:
> > - * PCI interrupts will come in on either the INTA or INTD interrups lines,
> > + * PCI interrupts will come in on either the INTA or INTD interrupts lines,
>     "interrupt" here.

Quite right.
I did them by script and inspected, but didn't notice that one.
cheers, Joe

Signed-off-by: Joe Perches <joe@perches.com>
---
diff --git a/include/asm-mips/mach-wrppmc/mach-gt64120.h b/include/asm-mips/mach-wrppmc/mach-gt64120.h
index 00d8bf6..465234a 100644
--- a/include/asm-mips/mach-wrppmc/mach-gt64120.h
+++ b/include/asm-mips/mach-wrppmc/mach-gt64120.h
@@ -45,7 +45,7 @@
 #define GT_PCI_IO_SIZE	0x02000000UL
 
 /*
- * PCI interrupts will come in on either the INTA or INTD interrups lines,
+ * PCI interrupts will come in on either the INTA or INTD interrupt lines,
  * which are mapped to the #2 and #5 interrupt pins of the MIPS.  On our
  * boards, they all either come in on IntD or they all come in on IntA, they
  * aren't mixed. There can be numerous PCI interrupts, so we keep a list of the

[PATCH] arch/parisc/: Spelling fixes

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 arch/parisc/kernel/cache.c    |    2 +-
 arch/parisc/kernel/hardware.c |    2 +-
 arch/parisc/kernel/signal.c   |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index 395bbce..e10d25d 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -305,7 +305,7 @@ flush_user_cache_page_non_current(struct vm_area_struct *vma,
 	/* save the current process space and pgd */
 	unsigned long space = mfsp(3), pgd = mfctl(25);
 
-	/* we don't mind taking interrups since they may not
+	/* we don't mind taking interrupts since they may not
 	 * do anything with user space, but we can't
 	 * be preempted here */
 	preempt_disable();
diff --git a/arch/parisc/kernel/hardware.c b/arch/parisc/kernel/hardware.c
index 04848b2..1909f88 100644
--- a/arch/parisc/kernel/hardware.c
+++ b/arch/parisc/kernel/hardware.c
@@ -1187,7 +1187,7 @@ static struct hp_hardware hp_hardware_list[] __devinitdata = {
 	{HPHW_FIO, 0x005, 0x000A9, 0x00, "AllegroLow Core PCI USB KB"}, 
 	{HPHW_FIO, 0x006, 0x000A9, 0x00, "AllegroHigh Core PCI SuperIO RS-232"}, 
 	{HPHW_FIO, 0x006, 0x000A9, 0x00, "AllegroHigh Core PCI USB KB"}, 
-	{HPHW_FIO, 0x007, 0x000A9, 0x0, "Miscelaneous PCI Plug-in"}, 
+	{HPHW_FIO, 0x007, 0x000A9, 0x0, "Miscellaneous PCI Plug-in"}, 
 	{HPHW_FIO, 0x00A, 0x000A9, 0x0, "Lego 360 Core PCI SuperIO RS-232"}, 
 	{HPHW_FIO, 0x00A, 0x000A9, 0x0, "Lego 360 Core PCI USB KB"}, 
 	{HPHW_FIO, 0x004, 0x00320, 0x0, "Metheus Frame Buffer"}, 
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index 2ce3806..58fccc9 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -333,7 +333,7 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	flush_user_icache_range((unsigned long) &frame->tramp[0],
 			   (unsigned long) &frame->tramp[TRAMP_SIZE]);
 
-	/* TRAMP Words 0-4, Lenght 5 = SIGRESTARTBLOCK_TRAMP
+	/* TRAMP Words 0-4, Length 5 = SIGRESTARTBLOCK_TRAMP
 	 * TRAMP Words 5-9, Length 4 = SIGRETURN_TRAMP
 	 * So the SIGRETURN_TRAMP is at the end of SIGRESTARTBLOCK_TRAMP
 	 */
-- 
1.5.3.7.949.g2221a6

[PATCH] include/asm-parisc/: Spelling fixes

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 include/asm-parisc/elf.h     |    2 +-
 include/asm-parisc/linkage.h |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/asm-parisc/elf.h b/include/asm-parisc/elf.h
index f628ac7..8e7946a 100644
--- a/include/asm-parisc/elf.h
+++ b/include/asm-parisc/elf.h
@@ -28,7 +28,7 @@
 #define EFA_PARISC_1_1		    0x0210 /* PA-RISC 1.1 big-endian.  */
 #define EFA_PARISC_2_0		    0x0214 /* PA-RISC 2.0 big-endian.  */
 
-/* Additional section indeces.  */
+/* Additional section indices.  */
 
 #define SHN_PARISC_ANSI_COMMON	0xff00	   /* Section for tenatively declared
 					      symbols in ANSI C.  */
diff --git a/include/asm-parisc/linkage.h b/include/asm-parisc/linkage.h
index ad8cd0d..0b19a72 100644
--- a/include/asm-parisc/linkage.h
+++ b/include/asm-parisc/linkage.h
@@ -8,7 +8,7 @@
 
 /*
  * In parisc assembly a semicolon marks a comment while a
- * exclamation mark is used to seperate independent lines.
+ * exclamation mark is used to separate independent lines.
  */
 #ifdef __ASSEMBLY__
 
-- 
1.5.3.7.949.g2221a6

[PATCH] arch/powerpc/: Spelling fixes

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 arch/powerpc/boot/4xx.c                 |    2 +-
 arch/powerpc/kernel/legacy_serial.c     |    2 +-
 arch/powerpc/sysdev/bestcomm/bestcomm.h |    2 +-
 arch/powerpc/sysdev/mmio_nvram.c        |    2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c
index ebf9e21..3d0e4f9 100644
--- a/arch/powerpc/boot/4xx.c
+++ b/arch/powerpc/boot/4xx.c
@@ -122,7 +122,7 @@ void ibm4xx_denali_fixup_memsize(void)
 	else
 		dpath = 4; /* 32 bits */
 
-	/* get adress pins (rows) */
+	/* get address pins (rows) */
 	val = mfdcr_sdram0(DDR0_42);
 
 	row = DDR_GET_VAL(val, DDR_APIN, DDR_APIN_SHIFT);
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 4ed5887..b9cae6b 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -474,7 +474,7 @@ static int __init serial_dev_init(void)
 
 	/*
 	 * Before we register the platfrom serial devices, we need
-	 * to fixup their interrutps and their IO ports.
+	 * to fixup their interrupts and their IO ports.
 	 */
 	DBG("Fixing serial ports interrupts and IO ports ...\n");
 
diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm.h b/arch/powerpc/sysdev/bestcomm/bestcomm.h
index e802cb4..c960a8b 100644
--- a/arch/powerpc/sysdev/bestcomm/bestcomm.h
+++ b/arch/powerpc/sysdev/bestcomm/bestcomm.h
@@ -20,7 +20,7 @@ struct bcom_bd; /* defined later on ... */
 
 
 /* ======================================================================== */
-/* Generic task managment                                                   */
+/* Generic task management                                                   */
 /* ======================================================================== */
 
 /**
diff --git a/arch/powerpc/sysdev/mmio_nvram.c b/arch/powerpc/sysdev/mmio_nvram.c
index e073e24..7b49633 100644
--- a/arch/powerpc/sysdev/mmio_nvram.c
+++ b/arch/powerpc/sysdev/mmio_nvram.c
@@ -99,7 +99,7 @@ int __init mmio_nvram_init(void)
 	nvram_addr = r.start;
 	mmio_nvram_len = r.end - r.start + 1;
 	if ( (!mmio_nvram_len) || (!nvram_addr) ) {
-		printk(KERN_WARNING "nvram: address or lenght is 0\n");
+		printk(KERN_WARNING "nvram: address or length is 0\n");
 		ret = -EIO;
 		goto out;
 	}
-- 
1.5.3.7.949.g2221a6

Re: [PATCH] arch/powerpc/: Spelling fixes

[Josh Boyer]

On Mon, 17 Dec 2007 11:30:12 -0800
Joe Perches <joe@perches.com> wrote:

> 
> Signed-off-by: Joe Perches <joe@perches.com>
> ---
>  arch/powerpc/boot/4xx.c                 |    2 +-
>  arch/powerpc/kernel/legacy_serial.c     |    2 +-
>  arch/powerpc/sysdev/bestcomm/bestcomm.h |    2 +-
>  arch/powerpc/sysdev/mmio_nvram.c        |    2 +-
>  4 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c
> index ebf9e21..3d0e4f9 100644
> --- a/arch/powerpc/boot/4xx.c
> +++ b/arch/powerpc/boot/4xx.c
> @@ -122,7 +122,7 @@ void ibm4xx_denali_fixup_memsize(void)
>  	else
>  		dpath = 4; /* 32 bits */
> 
> -	/* get adress pins (rows) */
> +	/* get address pins (rows) */
>  	val = mfdcr_sdram0(DDR0_42);
> 
>  	row = DDR_GET_VAL(val, DDR_APIN, DDR_APIN_SHIFT);

Ack on this part.

josh

[PATCH] include/asm-powerpc/: Spelling fixes

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 include/asm-powerpc/8xx_immap.h           |    2 +-
 include/asm-powerpc/commproc.h            |    2 +-
 include/asm-powerpc/iseries/hv_lp_event.h |    2 +-
 include/asm-powerpc/reg_booke.h           |    2 +-
 include/asm-powerpc/smu.h                 |   12 ++++++------
 include/asm-powerpc/spu.h                 |    2 +-
 include/asm-powerpc/spu_csa.h             |    2 +-
 7 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/include/asm-powerpc/8xx_immap.h b/include/asm-powerpc/8xx_immap.h
index 1311cef..4b0e152 100644
--- a/include/asm-powerpc/8xx_immap.h
+++ b/include/asm-powerpc/8xx_immap.h
@@ -123,7 +123,7 @@ typedef struct	mem_ctlr {
 #define OR_G5LA		0x00000400	/* Output #GPL5 on #GPL_A5		*/
 #define OR_G5LS		0x00000200	/* Drive #GPL high on falling edge of...*/
 #define OR_BI		0x00000100	/* Burst inhibit			*/
-#define OR_SCY_MSK	0x000000f0	/* Cycle Lenght in Clocks		*/
+#define OR_SCY_MSK	0x000000f0	/* Cycle Length in Clocks		*/
 #define OR_SCY_0_CLK	0x00000000	/* 0 clock cycles wait states		*/
 #define OR_SCY_1_CLK	0x00000010	/* 1 clock cycles wait states		*/
 #define OR_SCY_2_CLK	0x00000020	/* 2 clock cycles wait states		*/
diff --git a/include/asm-powerpc/commproc.h b/include/asm-powerpc/commproc.h
index a2328b8..0e192cc 100644
--- a/include/asm-powerpc/commproc.h
+++ b/include/asm-powerpc/commproc.h
@@ -693,7 +693,7 @@ typedef struct risc_timer_pram {
 #define	CICR_SCC_SCC3		((uint)0x00200000)	/* SCC3 @ SCCc */
 #define	CICR_SCB_SCC2		((uint)0x00040000)	/* SCC2 @ SCCb */
 #define	CICR_SCA_SCC1		((uint)0x00000000)	/* SCC1 @ SCCa */
-#define CICR_IRL_MASK		((uint)0x0000e000)	/* Core interrrupt */
+#define CICR_IRL_MASK		((uint)0x0000e000)	/* Core interrupt */
 #define CICR_HP_MASK		((uint)0x00001f00)	/* Hi-pri int. */
 #define CICR_IEN		((uint)0x00000080)	/* Int. enable */
 #define CICR_SPS		((uint)0x00000001)	/* SCC Spread */
diff --git a/include/asm-powerpc/iseries/hv_lp_event.h b/include/asm-powerpc/iseries/hv_lp_event.h
index 6ce2ce1..8f5da7d 100644
--- a/include/asm-powerpc/iseries/hv_lp_event.h
+++ b/include/asm-powerpc/iseries/hv_lp_event.h
@@ -78,7 +78,7 @@ extern int HvLpEvent_openPath(HvLpEvent_Type eventType, HvLpIndex lpIndex);
 
 /*
  * Close an Lp Event Path for a type and partition
- * returns 0 on sucess
+ * returns 0 on success
  */
 extern int HvLpEvent_closePath(HvLpEvent_Type eventType, HvLpIndex lpIndex);
 
diff --git a/include/asm-powerpc/reg_booke.h b/include/asm-powerpc/reg_booke.h
index 8fdc2b4..5e551f4 100644
--- a/include/asm-powerpc/reg_booke.h
+++ b/include/asm-powerpc/reg_booke.h
@@ -293,7 +293,7 @@
 #define ESR_IMCB	0x20000000	/* Instr. Machine Check - Bus error */
 #define ESR_IMCT	0x10000000	/* Instr. Machine Check - Timeout */
 #define ESR_PIL		0x08000000	/* Program Exception - Illegal */
-#define ESR_PPR		0x04000000	/* Program Exception - Priveleged */
+#define ESR_PPR		0x04000000	/* Program Exception - Privileged */
 #define ESR_PTR		0x02000000	/* Program Exception - Trap */
 #define ESR_FP		0x01000000	/* Floating Point Operation */
 #define ESR_DST		0x00800000	/* Storage Exception - Data miss */
diff --git a/include/asm-powerpc/smu.h b/include/asm-powerpc/smu.h
index e49f644..bcdd311 100644
--- a/include/asm-powerpc/smu.h
+++ b/include/asm-powerpc/smu.h
@@ -22,7 +22,7 @@
  * Partition info commands
  *
  * These commands are used to retrieve the sdb-partition-XX datas from
- * the SMU. The lenght is always 2. First byte is the subcommand code
+ * the SMU. The length is always 2. First byte is the subcommand code
  * and second byte is the partition ID.
  *
  * The reply is 6 bytes:
@@ -173,12 +173,12 @@
  * Power supply control
  *
  * The "sub" command is an ASCII string in the data, the
- * data lenght is that of the string.
+ * data length is that of the string.
  *
  * The VSLEW command can be used to get or set the voltage slewing.
- *  - lenght 5 (only "VSLEW") : it returns "DONE" and 3 bytes of
+ *  - length 5 (only "VSLEW") : it returns "DONE" and 3 bytes of
  *    reply at data offset 6, 7 and 8.
- *  - lenght 8 ("VSLEWxyz") has 3 additional bytes appended, and is
+ *  - length 8 ("VSLEWxyz") has 3 additional bytes appended, and is
  *    used to set the voltage slewing point. The SMU replies with "DONE"
  * I yet have to figure out their exact meaning of those 3 bytes in
  * both cases. They seem to be:
@@ -564,13 +564,13 @@ struct smu_user_cmd_hdr
 
 	__u8		cmd;			/* SMU command byte */
 	__u8		pad[3];			/* padding */
-	__u32		data_len;		/* Lenght of data following */
+	__u32		data_len;		/* Length of data following */
 };
 
 struct smu_user_reply_hdr
 {
 	__u32		status;			/* Command status */
-	__u32		reply_len;		/* Lenght of data follwing */
+	__u32		reply_len;		/* Length of data follwing */
 };
 
 #endif /*  _SMU_H */
diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h
index b1accce..85ee4ca 100644
--- a/include/asm-powerpc/spu.h
+++ b/include/asm-powerpc/spu.h
@@ -299,7 +299,7 @@ int spu_switch_event_register(struct notifier_block * n);
 int spu_switch_event_unregister(struct notifier_block * n);
 
 /*
- * This defines the Local Store, Problem Area and Privlege Area of an SPU.
+ * This defines the Local Store, Problem Area and Privilege Area of an SPU.
  */
 
 union mfc_tag_size_class_cmd {
diff --git a/include/asm-powerpc/spu_csa.h b/include/asm-powerpc/spu_csa.h
index e87794d..867bc26 100644
--- a/include/asm-powerpc/spu_csa.h
+++ b/include/asm-powerpc/spu_csa.h
@@ -194,7 +194,7 @@ struct spu_priv1_collapsed {
 };
 
 /*
- * struct spu_priv2_collapsed - condensed priviliged 2 area, w/o pads.
+ * struct spu_priv2_collapsed - condensed privileged 2 area, w/o pads.
  */
 struct spu_priv2_collapsed {
 	u64 slb_index_W;
-- 
1.5.3.7.949.g2221a6

[PATCH] arch/ppc/: Spelling fixes

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 arch/ppc/syslib/ppc8xx_pic.c |    2 +-
 arch/ppc/syslib/ppc_sys.c    |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/ppc/syslib/ppc8xx_pic.c b/arch/ppc/syslib/ppc8xx_pic.c
index e8619c7..bce9a75 100644
--- a/arch/ppc/syslib/ppc8xx_pic.c
+++ b/arch/ppc/syslib/ppc8xx_pic.c
@@ -16,7 +16,7 @@ extern int cpm_get_irq(void);
  * the only interrupt controller.  Some boards, like the MBX and
  * Sandpoint have the 8259 as a secondary controller.  Depending
  * upon the processor type, the internal controller can have as
- * few as 16 interrups or as many as 64.  We could use  the
+ * few as 16 interrupts or as many as 64.  We could use  the
  * "clear_bit()" and "set_bit()" functions like other platforms,
  * but they are overkill for us.
  */
diff --git a/arch/ppc/syslib/ppc_sys.c b/arch/ppc/syslib/ppc_sys.c
index 2d48018..837183c 100644
--- a/arch/ppc/syslib/ppc_sys.c
+++ b/arch/ppc/syslib/ppc_sys.c
@@ -185,7 +185,7 @@ void platform_notify_map(const struct platform_notify_dev_map *map,
  */
 
 /*
-   Here we'll replace .name pointers with fixed-lenght strings
+   Here we'll replace .name pointers with fixed-length strings
    Hereby, this should be called *before* any func stuff triggeded.
  */
 void ppc_sys_device_initfunc(void)
-- 
1.5.3.7.949.g2221a6

Re: [PATCH] arch/ppc/: Spelling fixes

[Vitaly Bordug]

On Mon, 17 Dec 2007 11:30:14 -0800
Joe Perches wrote:

> 
> Signed-off-by: Joe Perches <joe@perches.com>
> ---
>  arch/ppc/syslib/ppc8xx_pic.c |    2 +-
>  arch/ppc/syslib/ppc_sys.c    |    2 +-
I'm not really sure we should still care about typos in
arch/ppc..



-- 
Sincerely, Vitaly

Re: [PATCH] arch/ppc/: Spelling fixes

[Joe Perches]

On Mon, 2007-12-17 at 23:42 +0300, Vitaly Bordug wrote:
> I'm not really sure we should still care about typos in
> arch/ppc..

Fine by me.  I heard tell of a desire to integrate or
rework the power/ppc arches anyway.  cheers, Joe

[PATCH] include/asm-ppc/: Spelling fixes

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 include/asm-ppc/8xx_immap.h |    2 +-
 include/asm-ppc/commproc.h  |    2 +-
 include/asm-ppc/reg_booke.h |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/include/asm-ppc/8xx_immap.h b/include/asm-ppc/8xx_immap.h
index 1311cef..4b0e152 100644
--- a/include/asm-ppc/8xx_immap.h
+++ b/include/asm-ppc/8xx_immap.h
@@ -123,7 +123,7 @@ typedef struct	mem_ctlr {
 #define OR_G5LA		0x00000400	/* Output #GPL5 on #GPL_A5		*/
 #define OR_G5LS		0x00000200	/* Drive #GPL high on falling edge of...*/
 #define OR_BI		0x00000100	/* Burst inhibit			*/
-#define OR_SCY_MSK	0x000000f0	/* Cycle Lenght in Clocks		*/
+#define OR_SCY_MSK	0x000000f0	/* Cycle Length in Clocks		*/
 #define OR_SCY_0_CLK	0x00000000	/* 0 clock cycles wait states		*/
 #define OR_SCY_1_CLK	0x00000010	/* 1 clock cycles wait states		*/
 #define OR_SCY_2_CLK	0x00000020	/* 2 clock cycles wait states		*/
diff --git a/include/asm-ppc/commproc.h b/include/asm-ppc/commproc.h
index 3972487..462abb1 100644
--- a/include/asm-ppc/commproc.h
+++ b/include/asm-ppc/commproc.h
@@ -681,7 +681,7 @@ typedef struct risc_timer_pram {
 #define	CICR_SCC_SCC3		((uint)0x00200000)	/* SCC3 @ SCCc */
 #define	CICR_SCB_SCC2		((uint)0x00040000)	/* SCC2 @ SCCb */
 #define	CICR_SCA_SCC1		((uint)0x00000000)	/* SCC1 @ SCCa */
-#define CICR_IRL_MASK		((uint)0x0000e000)	/* Core interrrupt */
+#define CICR_IRL_MASK		((uint)0x0000e000)	/* Core interrupt */
 #define CICR_HP_MASK		((uint)0x00001f00)	/* Hi-pri int. */
 #define CICR_IEN		((uint)0x00000080)	/* Int. enable */
 #define CICR_SPS		((uint)0x00000001)	/* SCC Spread */
diff --git a/include/asm-ppc/reg_booke.h b/include/asm-ppc/reg_booke.h
index 82948ed..4cad45a 100644
--- a/include/asm-ppc/reg_booke.h
+++ b/include/asm-ppc/reg_booke.h
@@ -283,7 +283,7 @@
 #define ESR_IMCB	0x20000000	/* Instr. Machine Check - Bus error */
 #define ESR_IMCT	0x10000000	/* Instr. Machine Check - Timeout */
 #define ESR_PIL		0x08000000	/* Program Exception - Illegal */
-#define ESR_PPR		0x04000000	/* Program Exception - Priveleged */
+#define ESR_PPR		0x04000000	/* Program Exception - Privileged */
 #define ESR_PTR		0x02000000	/* Program Exception - Trap */
 #define ESR_FP		0x01000000	/* Floating Point Operation */
 #define ESR_DST		0x00800000	/* Storage Exception - Data miss */
-- 
1.5.3.7.949.g2221a6

[PATCH] arch/s390/: Spelling fixes

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 arch/s390/crypto/prng.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/s390/crypto/prng.c b/arch/s390/crypto/prng.c
index 8eb3a1a..23ed094 100644
--- a/arch/s390/crypto/prng.c
+++ b/arch/s390/crypto/prng.c
@@ -90,7 +90,7 @@ static ssize_t prng_read(struct file *file, char __user *ubuf, size_t nbytes,
 	int ret = 0;
 	int tmp;
 
-	/* nbytes can be arbitrary long, we spilt it into chunks */
+	/* nbytes can be arbitrary length, we split it into chunks */
 	while (nbytes) {
 		/* same as in extract_entropy_user in random.c */
 		if (need_resched()) {
-- 
1.5.3.7.949.g2221a6

[PATCH] include/asm-s390/: Spelling fixes

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 include/asm-s390/cio.h    |    4 ++--
 include/asm-s390/dasd.h   |    2 +-
 include/asm-s390/qdio.h   |    2 +-
 include/asm-s390/zcrypt.h |    2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/include/asm-s390/cio.h b/include/asm-s390/cio.h
index 2f08c16..123b557 100644
--- a/include/asm-s390/cio.h
+++ b/include/asm-s390/cio.h
@@ -24,8 +24,8 @@
  * @fmt: format
  * @pfch: prefetch
  * @isic: initial-status interruption control
- * @alcc: adress-limit checking control
- * @ssi: supress-suspended interruption
+ * @alcc: address-limit checking control
+ * @ssi: suppress-suspended interruption
  * @zcc: zero condition code
  * @ectl: extended control
  * @pno: path not operational
diff --git a/include/asm-s390/dasd.h b/include/asm-s390/dasd.h
index 604f68f..3f002e1 100644
--- a/include/asm-s390/dasd.h
+++ b/include/asm-s390/dasd.h
@@ -105,7 +105,7 @@ typedef struct dasd_information_t {
 } dasd_information_t;
 
 /*
- * Read Subsystem Data - Perfomance Statistics
+ * Read Subsystem Data - Performance Statistics
  */ 
 typedef struct dasd_rssd_perf_stats_t {
 	unsigned char  invalid:1;
diff --git a/include/asm-s390/qdio.h b/include/asm-s390/qdio.h
index 74db1dc..828bfcb 100644
--- a/include/asm-s390/qdio.h
+++ b/include/asm-s390/qdio.h
@@ -184,7 +184,7 @@ struct qdr {
 #endif /* QDIO_32_BIT */
 	unsigned long qiba;             /* queue-information-block address */
 	unsigned int  res8;             /* reserved */
-	unsigned int  qkey    :  4;     /* queue-informatio-block key */
+	unsigned int  qkey    :  4;     /* queue-information-block key */
 	unsigned int  res9    : 28;     /* reserved */
 /*	union _qd {*/ /* why this? */
 		struct qdesfmt0 qdf0[126];
diff --git a/include/asm-s390/zcrypt.h b/include/asm-s390/zcrypt.h
index a5dada6..f228f1b 100644
--- a/include/asm-s390/zcrypt.h
+++ b/include/asm-s390/zcrypt.h
@@ -117,7 +117,7 @@ struct CPRBX {
 	unsigned char	padx004[16 - sizeof (char *)];
 	unsigned char *	req_extb;	/* request extension block 'addr'*/
 	unsigned char	padx005[16 - sizeof (char *)];
-	unsigned char *	rpl_extb;	/* reply extension block 'addres'*/
+	unsigned char *	rpl_extb;	/* reply extension block 'address'*/
 	unsigned short	ccp_rtcode;	/* server return code		 */
 	unsigned short	ccp_rscode;	/* server reason code		 */
 	unsigned int	mac_data_len;	/* Mac Data Length		 */
-- 
1.5.3.7.949.g2221a6

[PATCH] arch/sh/: Spelling fixes

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 arch/sh/boards/dreamcast/irq.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/sh/boards/dreamcast/irq.c b/arch/sh/boards/dreamcast/irq.c
index 5bf01f8..9d0673a 100644
--- a/arch/sh/boards/dreamcast/irq.c
+++ b/arch/sh/boards/dreamcast/irq.c
@@ -136,7 +136,7 @@ int systemasic_irq_demux(int irq)
         emr = EMR_BASE + (level << 4) + (level << 2);
         esr = ESR_BASE + (level << 2);
 
-        /* Mask the ESR to filter any spurious, unwanted interrtupts */
+        /* Mask the ESR to filter any spurious, unwanted interrupts */
         status = inl(esr);
         status &= inl(emr);
 
-- 
1.5.3.7.949.g2221a6

[PATCH] include/asm-sh/: Spelling fixes

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 include/asm-sh/hd64461.h   |   28 ++++++++++++++--------------
 include/asm-sh/microdev.h  |    4 ++--
 include/asm-sh/voyagergx.h |    2 +-
 3 files changed, 17 insertions(+), 17 deletions(-)

diff --git a/include/asm-sh/hd64461.h b/include/asm-sh/hd64461.h
index 342ca55..8c1353b 100644
--- a/include/asm-sh/hd64461.h
+++ b/include/asm-sh/hd64461.h
@@ -46,10 +46,10 @@
 /* CPU Data Bus Control Register */
 #define	HD64461_SCPUCR		(CONFIG_HD64461_IOBASE + 0x04)
 
-/* Base Adress Register */
+/* Base Address Register */
 #define	HD64461_LCDCBAR		(CONFIG_HD64461_IOBASE + 0x1000)
 
-/* Line increment adress */
+/* Line increment address */
 #define	HD64461_LCDCLOR		(CONFIG_HD64461_IOBASE + 0x1002)
 
 /* Controls LCD controller */
@@ -80,9 +80,9 @@
 #define	HD64461_LDR3		(CONFIG_HD64461_IOBASE + 0x101e)
 
 /* Palette Registers */
-#define	HD64461_CPTWAR		(CONFIG_HD64461_IOBASE + 0x1030)	/* Color Palette Write Adress Register */
+#define	HD64461_CPTWAR		(CONFIG_HD64461_IOBASE + 0x1030)	/* Color Palette Write Address Register */
 #define	HD64461_CPTWDR		(CONFIG_HD64461_IOBASE + 0x1032)	/* Color Palette Write Data Register */
-#define	HD64461_CPTRAR		(CONFIG_HD64461_IOBASE + 0x1034)	/* Color Palette Read Adress Register */
+#define	HD64461_CPTRAR		(CONFIG_HD64461_IOBASE + 0x1034)	/* Color Palette Read Address Register */
 #define	HD64461_CPTRDR		(CONFIG_HD64461_IOBASE + 0x1036)	/* Color Palette Read Data Register */
 
 #define	HD64461_GRDOR		(CONFIG_HD64461_IOBASE + 0x1040)	/* Display Resolution Offset Register */
@@ -97,8 +97,8 @@
 #define	HD64461_GRCFGR_COLORDEPTH8	0x01	/* Sets Colordepth 8 for Accelerator */
 
 /* Line Drawing Registers */
-#define	HD64461_LNSARH		(CONFIG_HD64461_IOBASE + 0x1046)	/* Line Start Adress Register (H) */
-#define	HD64461_LNSARL		(CONFIG_HD64461_IOBASE + 0x1048)	/* Line Start Adress Register (L) */
+#define	HD64461_LNSARH		(CONFIG_HD64461_IOBASE + 0x1046)	/* Line Start Address Register (H) */
+#define	HD64461_LNSARL		(CONFIG_HD64461_IOBASE + 0x1048)	/* Line Start Address Register (L) */
 #define	HD64461_LNAXLR		(CONFIG_HD64461_IOBASE + 0x104a)	/* Axis Pixel Length Register */
 #define	HD64461_LNDGR		(CONFIG_HD64461_IOBASE + 0x104c)	/* Diagonal Register */
 #define	HD64461_LNAXR		(CONFIG_HD64461_IOBASE + 0x104e)	/* Axial Register */
@@ -106,16 +106,16 @@
 #define	HD64461_LNMDR		(CONFIG_HD64461_IOBASE + 0x1052)	/* Line Mode Register */
 
 /* BitBLT Registers */
-#define	HD64461_BBTSSARH	(CONFIG_HD64461_IOBASE + 0x1054)	/* Source Start Adress Register (H) */
-#define	HD64461_BBTSSARL	(CONFIG_HD64461_IOBASE + 0x1056)	/* Source Start Adress Register (L) */
-#define	HD64461_BBTDSARH	(CONFIG_HD64461_IOBASE + 0x1058)	/* Destination Start Adress Register (H) */
-#define	HD64461_BBTDSARL	(CONFIG_HD64461_IOBASE + 0x105a)	/* Destination Start Adress Register (L) */
+#define	HD64461_BBTSSARH	(CONFIG_HD64461_IOBASE + 0x1054)	/* Source Start Address Register (H) */
+#define	HD64461_BBTSSARL	(CONFIG_HD64461_IOBASE + 0x1056)	/* Source Start Address Register (L) */
+#define	HD64461_BBTDSARH	(CONFIG_HD64461_IOBASE + 0x1058)	/* Destination Start Address Register (H) */
+#define	HD64461_BBTDSARL	(CONFIG_HD64461_IOBASE + 0x105a)	/* Destination Start Address Register (L) */
 #define	HD64461_BBTDWR		(CONFIG_HD64461_IOBASE + 0x105c)	/* Destination Block Width Register */
 #define	HD64461_BBTDHR		(CONFIG_HD64461_IOBASE + 0x105e)	/* Destination Block Height Register */
-#define	HD64461_BBTPARH		(CONFIG_HD64461_IOBASE + 0x1060)	/* Pattern Start Adress Register (H) */
-#define	HD64461_BBTPARL		(CONFIG_HD64461_IOBASE + 0x1062)	/* Pattern Start Adress Register (L) */
-#define	HD64461_BBTMARH		(CONFIG_HD64461_IOBASE + 0x1064)	/* Mask Start Adress Register (H) */
-#define	HD64461_BBTMARL		(CONFIG_HD64461_IOBASE + 0x1066)	/* Mask Start Adress Register (L) */
+#define	HD64461_BBTPARH		(CONFIG_HD64461_IOBASE + 0x1060)	/* Pattern Start Address Register (H) */
+#define	HD64461_BBTPARL		(CONFIG_HD64461_IOBASE + 0x1062)	/* Pattern Start Address Register (L) */
+#define	HD64461_BBTMARH		(CONFIG_HD64461_IOBASE + 0x1064)	/* Mask Start Address Register (H) */
+#define	HD64461_BBTMARL		(CONFIG_HD64461_IOBASE + 0x1066)	/* Mask Start Address Register (L) */
 #define	HD64461_BBTROPR		(CONFIG_HD64461_IOBASE + 0x1068)	/* ROP Register */
 #define	HD64461_BBTMDR		(CONFIG_HD64461_IOBASE + 0x106a)	/* BitBLT Mode Register */
 
diff --git a/include/asm-sh/microdev.h b/include/asm-sh/microdev.h
index 018332a..1aed158 100644
--- a/include/asm-sh/microdev.h
+++ b/include/asm-sh/microdev.h
@@ -17,7 +17,7 @@ extern void microdev_print_fpga_intc_status(void);
 /*
  * The following are useful macros for manipulating the interrupt
  * controller (INTC) on the CPU-board FPGA.  should be noted that there
- * is an INTC on the FPGA, and a seperate INTC on the SH4-202 core -
+ * is an INTC on the FPGA, and a separate INTC on the SH4-202 core -
  * these are two different things, both of which need to be prorammed to
  * correctly route - unfortunately, they have the same name and
  * abbreviations!
@@ -25,7 +25,7 @@ extern void microdev_print_fpga_intc_status(void);
 #define	MICRODEV_FPGA_INTC_BASE		0xa6110000ul				/* INTC base address on CPU-board FPGA */
 #define	MICRODEV_FPGA_INTENB_REG	(MICRODEV_FPGA_INTC_BASE+0ul)		/* Interrupt Enable Register on INTC on CPU-board FPGA */
 #define	MICRODEV_FPGA_INTDSB_REG	(MICRODEV_FPGA_INTC_BASE+8ul)		/* Interrupt Disable Register on INTC on CPU-board FPGA */
-#define	MICRODEV_FPGA_INTC_MASK(n)	(1ul<<(n))				/* Interupt mask to enable/disable INTC in CPU-board FPGA */
+#define	MICRODEV_FPGA_INTC_MASK(n)	(1ul<<(n))				/* Interrupt mask to enable/disable INTC in CPU-board FPGA */
 #define	MICRODEV_FPGA_INTPRI_REG(n)	(MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */
 #define	MICRODEV_FPGA_INTPRI_LEVEL(n,x)	((x)<<(((n)%8)*4))			/* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */
 #define	MICRODEV_FPGA_INTPRI_MASK(n)	(MICRODEV_FPGA_INTPRI_LEVEL((n),0xful))	/* Interrupt Priority Mask on INTC on CPU-board FPGA */
diff --git a/include/asm-sh/voyagergx.h b/include/asm-sh/voyagergx.h
index d825596..45b4547 100644
--- a/include/asm-sh/voyagergx.h
+++ b/include/asm-sh/voyagergx.h
@@ -213,7 +213,7 @@
 /* ----- Power mode 1 clock register -------------------------- */
 #define POWER_MODE1_CLOCK		(0x00004C + VOYAGER_BASE)
 
-/* ----- Power mode controll register ------------------------- */
+/* ----- Power mode control register ------------------------- */
 #define POWER_MODE_CTRL			(0x000054 + VOYAGER_BASE)
 
 /* ----- Miscellaneous Timing register ------------------------ */
-- 
1.5.3.7.949.g2221a6

[PATCH] arch/sh64/: Spelling fixes

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 arch/sh64/kernel/pci_sh5.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/sh64/kernel/pci_sh5.c b/arch/sh64/kernel/pci_sh5.c
index b4d9534..dd69d69 100644
--- a/arch/sh64/kernel/pci_sh5.c
+++ b/arch/sh64/kernel/pci_sh5.c
@@ -96,7 +96,7 @@ int __init sh5pci_init(unsigned memStart, unsigned memSize)
 		panic("Unable to remap PCIIO\n");
 	}
 
-	pr_debug("Register base addres is 0x%08lx\n", pcicr_virt);
+	pr_debug("Register base address is 0x%08lx\n", pcicr_virt);
 
 	/* Clear snoop registers */
         SH5PCI_WRITE(CSCR0, 0);
-- 
1.5.3.7.949.g2221a6

[PATCH] arch/sparc/: Spelling fixes

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 arch/sparc/kernel/ptrace.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/sparc/kernel/ptrace.c b/arch/sparc/kernel/ptrace.c
index fe562db..7452269 100644
--- a/arch/sparc/kernel/ptrace.c
+++ b/arch/sparc/kernel/ptrace.c
@@ -5,7 +5,7 @@
  * Based upon code written by Ross Biro, Linus Torvalds, Bob Manson,
  * and David Mosberger.
  *
- * Added Linux support -miguel (weird, eh?, the orignal code was meant
+ * Added Linux support -miguel (weird, eh?, the original code was meant
  * to emulate SunOS).
  */
 
-- 
1.5.3.7.949.g2221a6

Re: [PATCH] arch/sparc/: Spelling fixes

[David Miller]

From: Joe Perches <joe@perches.com>
Date: Mon, 17 Dec 2007 11:30:21 -0800

> 
> Signed-off-by: Joe Perches <joe@perches.com>

Applied.

[PATCH] arch/sparc64/: Spelling fixes

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 arch/sparc64/kernel/pci_schizo.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c
index 9546ba9..e752e75 100644
--- a/arch/sparc64/kernel/pci_schizo.c
+++ b/arch/sparc64/kernel/pci_schizo.c
@@ -850,7 +850,7 @@ static int pbm_routes_this_ino(struct pci_pbm_info *pbm, u32 ino)
 /* How the Tomatillo IRQs are routed around is pure guesswork here.
  *
  * All the Tomatillo devices I see in prtconf dumps seem to have only
- * a single PCI bus unit attached to it.  It would seem they are seperate
+ * a single PCI bus unit attached to it.  It would seem they are separate
  * devices because their PortID (ie. JBUS ID) values are all different
  * and thus the registers are mapped to totally different locations.
  *
-- 
1.5.3.7.949.g2221a6

Re: [PATCH] arch/sparc64/: Spelling fixes

[David Miller]

From: Joe Perches <joe@perches.com>
Date: Mon, 17 Dec 2007 11:30:22 -0800

> Signed-off-by: Joe Perches <joe@perches.com>

Applied.

[PATCH] arch/um: Spelling fixes

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 arch/um/sys-x86_64/signal.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/um/sys-x86_64/signal.c b/arch/um/sys-x86_64/signal.c
index 1778d33..3a63862 100644
--- a/arch/um/sys-x86_64/signal.c
+++ b/arch/um/sys-x86_64/signal.c
@@ -112,7 +112,7 @@ static int copy_sc_to_user(struct sigcontext __user *to,
 	err |= PUTREG(regs, RSI, to, rsi);
 	err |= PUTREG(regs, RBP, to, rbp);
 	/*
-	 * Must use orignal RSP, which is passed in, rather than what's in
+	 * Must use original RSP, which is passed in, rather than what's in
 	 * the pt_regs, because that's already been updated to point at the
 	 * signal frame.
 	 */
-- 
1.5.3.7.949.g2221a6

[PATCH] arch/x86/: Spelling fixes

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 arch/x86/kernel/apic_32.c    |    2 +-
 arch/x86/kernel/mpparse_32.c |    2 +-
 arch/x86/kernel/vm86_32.c    |    2 +-
 arch/x86/mm/srat_64.c        |    2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c
index 96986b4..22346c7 100644
--- a/arch/x86/kernel/apic_32.c
+++ b/arch/x86/kernel/apic_32.c
@@ -110,7 +110,7 @@ static inline int lapic_get_version(void)
 }
 
 /*
- * Check, if the APIC is integrated or a seperate chip
+ * Check, if the APIC is integrated or a separate chip
  */
 static inline int lapic_is_integrated(void)
 {
diff --git a/arch/x86/kernel/mpparse_32.c b/arch/x86/kernel/mpparse_32.c
index 7a05a7f..e12d54e 100644
--- a/arch/x86/kernel/mpparse_32.c
+++ b/arch/x86/kernel/mpparse_32.c
@@ -1049,7 +1049,7 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
 	int idx, bit = 0;
 	static int pci_irq = 16;
 	/*
-	 * Mapping between Global System Interrups, which
+	 * Mapping between Global System Interrupts, which
 	 * represent all possible interrupts, and IRQs
 	 * assigned to actual devices.
 	 */
diff --git a/arch/x86/kernel/vm86_32.c b/arch/x86/kernel/vm86_32.c
index 157e4be..839619a 100644
--- a/arch/x86/kernel/vm86_32.c
+++ b/arch/x86/kernel/vm86_32.c
@@ -385,7 +385,7 @@ static inline void clear_AC(struct kernel_vm86_regs * regs)
  * functions. However someone forgot to call clear_IF(regs)
  * in the opposite case.
  * After the command sequence CLI PUSHF STI POPF you should
- * end up with interrups disabled, but you ended up with
+ * end up with interrupts disabled, but you ended up with
  * interrupts enabled.
  *  ( I was testing my own changes, but the only bug I
  *    could find was in a function I had not changed. )
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index ea85172..cd455f9 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -217,7 +217,7 @@ static inline int save_add_info(void) {return 0;}
 #endif
 /*
  * Update nodes_add and decide if to include add are in the zone.
- * Both SPARSE and RESERVE need nodes_add infomation.
+ * Both SPARSE and RESERVE need nodes_add information.
  * This code supports one contiguous hot add area per node.
  */
 static int reserve_hotadd(int node, unsigned long start, unsigned long end)
-- 
1.5.3.7.949.g2221a6

[PATCH] drivers/acpi/: Spelling fixes

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 drivers/acpi/scan.c              |    2 +-
 drivers/acpi/utilities/utresrc.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 5b4d462..fad2eaa 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -830,7 +830,7 @@ static int acpi_bus_get_flags(struct acpi_device *device)
 	if (ACPI_SUCCESS(status))
 		device->flags.wake_capable = 1;
 
-	/* TBD: Peformance management */
+	/* TBD: Performance management */
 
 	return 0;
 }
diff --git a/drivers/acpi/utilities/utresrc.c b/drivers/acpi/utilities/utresrc.c
index cbbd331..b630ee1 100644
--- a/drivers/acpi/utilities/utresrc.c
+++ b/drivers/acpi/utilities/utresrc.c
@@ -1,6 +1,6 @@
 /*******************************************************************************
  *
- * Module Name: utresrc - Resource managment utilities
+ * Module Name: utresrc - Resource management utilities
  *
  ******************************************************************************/
 
-- 
1.5.3.7.949.g2221a6

[PATCH] include/acpi/: Spelling fixes

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 include/acpi/acpixf.h    |    2 +-
 include/acpi/processor.h |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 9512f04..18a6377 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -85,7 +85,7 @@ acpi_install_initialization_handler(acpi_init_handler handler, u32 function);
 #endif
 
 /*
- * ACPI Memory managment
+ * ACPI Memory management
  */
 void *acpi_allocate(u32 size);
 
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 76411b1..6e253b5 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -182,7 +182,7 @@ struct acpi_processor_throttling {
 /* Limit Interface */
 
 struct acpi_processor_lx {
-	int px;			/* performace state */
+	int px;			/* performance state */
 	int tx;			/* throttle level */
 };
 
-- 
1.5.3.7.949.g2221a6

[PATCH] drivers/ata/: Spelling fixes

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 drivers/ata/ata_piix.c    |    2 +-
 drivers/ata/libata-core.c |    4 ++--
 drivers/ata/pata_at32.c   |    2 +-
 drivers/ata/pata_efar.c   |    2 +-
 drivers/ata/pata_it8213.c |    2 +-
 drivers/ata/pata_sis.c    |    4 ++--
 6 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index bb62a58..ee51853 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -769,7 +769,7 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	if (is_slave) {
 		/* clear TIME1|IE1|PPE1|DTE1 */
 		master_data &= 0xff0f;
-		/* Enable SITRE (seperate slave timing register) */
+		/* Enable SITRE (separate slave timing register) */
 		master_data |= 0x4000;
 		/* enable PPE1, IE1 and TIME1 as needed */
 		master_data |= (control << 4);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index e4dea86..debbfc3 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3065,7 +3065,7 @@ static int ata_dev_set_mode(struct ata_device *dev)
 /**
  *	ata_do_set_mode - Program timings and issue SET FEATURES - XFER
  *	@link: link on which timings will be programmed
- *	@r_failed_dev: out paramter for failed device
+ *	@r_failed_dev: out parameter for failed device
  *
  *	Standard implementation of the function used to tune and set
  *	ATA device disk transfer mode (PIO3, UDMA6, etc.).  If
@@ -3173,7 +3173,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
 /**
  *	ata_set_mode - Program timings and issue SET FEATURES - XFER
  *	@link: link on which timings will be programmed
- *	@r_failed_dev: out paramter for failed device
+ *	@r_failed_dev: out parameter for failed device
  *
  *	Set ATA device disk transfer mode (PIO3, UDMA6, etc.).  If
  *	ata_set_mode() fails, pointer to the failing device is
diff --git a/drivers/ata/pata_at32.c b/drivers/ata/pata_at32.c
index 67e574d..db057b1 100644
--- a/drivers/ata/pata_at32.c
+++ b/drivers/ata/pata_at32.c
@@ -324,7 +324,7 @@ static int __init pata_at32_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return irq;
 
-	/* Setup struct containing private infomation */
+	/* Setup struct containing private information */
 	info = kzalloc(sizeof(struct at32_ide_info), GFP_KERNEL);
 	if (!info)
 		return -ENOMEM;
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index 043dcd3..dc33220 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -135,7 +135,7 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev)
 		idetm_data &= 0xCC0F;
 		idetm_data |= (control << 4);
 
-		/* Slave timing in seperate register */
+		/* Slave timing in separate register */
 		pci_read_config_byte(dev, 0x44, &slave_data);
 		slave_data &= 0x0F << shift;
 		slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << shift;
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index 1eda821..e0c2cc2 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -128,7 +128,7 @@ static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev)
 		idetm_data &= 0xCC0F;
 		idetm_data |= (control << 4);
 
-		/* Slave timing in seperate register */
+		/* Slave timing in separate register */
 		pci_read_config_byte(dev, 0x44, &slave_data);
 		slave_data &= 0xF0;
 		slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << 4;
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 87546d9..dc7e915 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -345,7 +345,7 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 
 	if (adev->dma_mode < XFER_UDMA_0) {
 		/* bits 3-0 hold recovery timing bits 8-10 active timing and
-		   the higer bits are dependant on the device */
+		   the higher bits are dependant on the device */
 		timing &= ~0x870F;
 		timing |= mwdma_bits[speed];
 	} else {
@@ -385,7 +385,7 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 
 	if (adev->dma_mode < XFER_UDMA_0) {
 		/* bits 3-0 hold recovery timing bits 8-10 active timing and
-		   the higer bits are dependant on the device, bit 15 udma */
+		   the higher bits are dependant on the device, bit 15 udma */
 		timing &= ~0x870F;
 		timing |= mwdma_bits[speed];
 	} else {
-- 
1.5.3.7.949.g2221a6

[PATCH] drivers/atm/: Spelling fixes

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 drivers/atm/firestream.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c
index f8f7139..c662d68 100644
--- a/drivers/atm/firestream.c
+++ b/drivers/atm/firestream.c
@@ -171,8 +171,8 @@ static char *res_strings[] = {
 	"packet purged", 
 	"packet ageing timeout", 
 	"channel ageing timeout", 
-	"calculated lenght error", 
-	"programmed lenght limit error", 
+	"calculated length error", 
+	"programmed length limit error", 
 	"aal5 crc32 error", 
 	"oam transp or transpc crc10 error", 
 	"reserved 25", 
-- 
1.5.3.7.949.g2221a6

Re: [PATCH] drivers/atm/: Spelling fixes

[David Miller]

From: Joe Perches <joe@perches.com>
Date: Mon, 17 Dec 2007 11:30:28 -0800

> Signed-off-by: Joe Perches <joe@perches.com>

Applied.

[PATCH] drivers/block/: Spelling fixes

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 drivers/block/cciss_scsi.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index 63ee6c0..55178e9 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -1453,7 +1453,7 @@ static int cciss_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
 	rc = sendcmd(CCISS_RESET_MSG, ctlr, NULL, 0, 2, 0, 0, 
 		(unsigned char *) &cmd_in_trouble->Header.LUN.LunAddrBytes[0], 
 		TYPE_MSG);
-	/* sendcmd turned off interrputs on the board, turn 'em back on. */
+	/* sendcmd turned off interrupts on the board, turn 'em back on. */
 	(*c)->access.set_intr_mask(*c, CCISS_INTR_ON);
 	if (rc == 0)
 		return SUCCESS;
@@ -1483,7 +1483,7 @@ static int  cciss_eh_abort_handler(struct scsi_cmnd *scsicmd)
 		0, 2, 0, 0, 
 		(unsigned char *) &cmd_to_abort->Header.LUN.LunAddrBytes[0], 
 		TYPE_MSG);
-	/* sendcmd turned off interrputs on the board, turn 'em back on. */
+	/* sendcmd turned off interrupts on the board, turn 'em back on. */
 	(*c)->access.set_intr_mask(*c, CCISS_INTR_ON);
 	if (rc == 0)
 		return SUCCESS;
-- 
1.5.3.7.949.g2221a6

[PATCH] drivers/bluetooth/: Spelling fixes

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 drivers/bluetooth/btuart_cs.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c
index 08f48d5..dade162 100644
--- a/drivers/bluetooth/btuart_cs.c
+++ b/drivers/bluetooth/btuart_cs.c
@@ -383,7 +383,7 @@ static void btuart_change_speed(btuart_info_t *info, unsigned int speed)
 	outb(lcr, iobase + UART_LCR);	/* Set 8N1  */
 	outb(fcr, iobase + UART_FCR);	/* Enable FIFO's */
 
-	/* Turn on interrups */
+	/* Turn on interrupts */
 	outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
 
 	spin_unlock_irqrestore(&(info->lock), flags);
-- 
1.5.3.7.949.g2221a6

[PATCH] drivers/char/: Spelling fixes

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 drivers/char/drm/r300_reg.h    |    2 +-
 drivers/char/drm/via_dma.c     |    2 +-
 drivers/char/efirtc.c          |    2 +-
 drivers/char/epca.c            |    4 ++--
 drivers/char/hangcheck-timer.c |    2 +-
 drivers/char/hvcs.c            |    2 +-
 drivers/char/ip2/i2lib.c       |    2 +-
 drivers/char/ip2/ip2main.c     |    2 +-
 drivers/char/synclink.c        |    2 +-
 drivers/char/toshiba.c         |    2 +-
 10 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h
index 3ae57ec..fa194a4 100644
--- a/drivers/char/drm/r300_reg.h
+++ b/drivers/char/drm/r300_reg.h
@@ -584,7 +584,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 #define R300_RE_FOG_START                     0x4298
 
 /* Not sure why there are duplicate of factor and constant values.
- * My best guess so far is that there are seperate zbiases for test and write.
+ * My best guess so far is that there are separate zbiases for test and write.
  * Ordering might be wrong.
  * Some of the tests indicate that fgl has a fallback implementation of zbias
  * via pixel shaders.
diff --git a/drivers/char/drm/via_dma.c b/drivers/char/drm/via_dma.c
index 75d6b74..7009dbd 100644
--- a/drivers/char/drm/via_dma.c
+++ b/drivers/char/drm/via_dma.c
@@ -400,7 +400,7 @@ static inline uint32_t *via_align_buffer(drm_via_private_t * dev_priv,
 }
 
 /*
- * This function is used internally by ring buffer mangement code.
+ * This function is used internally by ring buffer management code.
  *
  * Returns virtual pointer to ring buffer.
  */
diff --git a/drivers/char/efirtc.c b/drivers/char/efirtc.c
index 004141d..49233f5 100644
--- a/drivers/char/efirtc.c
+++ b/drivers/char/efirtc.c
@@ -18,7 +18,7 @@
  *
  * NOTES:
  *	- Locking is required for safe execution of EFI calls with regards
- *	  to interrrupts and SMP.
+ *	  to interrupts and SMP.
  *
  * TODO (December 1999):
  * 	- provide the API to set/get the WakeUp Alarm (different from the
diff --git a/drivers/char/epca.c b/drivers/char/epca.c
index ffcecde..ffd747c 100644
--- a/drivers/char/epca.c
+++ b/drivers/char/epca.c
@@ -1797,7 +1797,7 @@ static unsigned termios2digi_c(struct channel *ch, unsigned cflag)
 	res |= cflag & ((CBAUD ^ CBAUDEX) | PARODD | PARENB | CSTOPB | CSIZE);
 	/*
 	 * This gets a little confusing. The Digi cards have their own
-	 * representation of c_cflags controling baud rate. For the most part
+	 * representation of c_cflags controlling baud rate. For the most part
 	 * this is identical to the Linux implementation. However; Digi
 	 * supports one rate (76800) that Linux doesn't. This means that the
 	 * c_cflag entry that would normally mean 76800 for Digi actually means
@@ -2068,7 +2068,7 @@ static int info_ioctl(struct tty_struct *tty, struct file *file,
 		{
 			/*
 			 * This call is made by the apps to complete the
-			 * initilization of the board(s). This routine is
+			 * initialization of the board(s). This routine is
 			 * responsible for setting the card to its initial
 			 * state and setting the drivers control fields to the
 			 * sutianle settings for the card in question.
diff --git a/drivers/char/hangcheck-timer.c b/drivers/char/hangcheck-timer.c
index 0e8ceea..712d9f2 100644
--- a/drivers/char/hangcheck-timer.c
+++ b/drivers/char/hangcheck-timer.c
@@ -26,7 +26,7 @@
  * The hangcheck-timer driver uses the TSC to catch delays that
  * jiffies does not notice.  A timer is set.  When the timer fires, it
  * checks whether it was delayed and if that delay exceeds a given
- * margin of error.  The hangcheck_tick module paramter takes the timer
+ * margin of error.  The hangcheck_tick module parameter takes the timer
  * duration in seconds.  The hangcheck_margin parameter defines the
  * margin of error, in seconds.  The defaults are 60 seconds for the
  * timer and 180 seconds for the margin of error.  IOW, a timer is set
diff --git a/drivers/char/hvcs.c b/drivers/char/hvcs.c
index 69d8866..59a9f7a 100644
--- a/drivers/char/hvcs.c
+++ b/drivers/char/hvcs.c
@@ -850,7 +850,7 @@ static int __devexit hvcs_remove(struct vio_dev *dev)
 	if (!hvcsd)
 		return -ENODEV;
 
-	/* By this time the vty-server won't be getting any more interrups */
+	/* By this time the vty-server won't be getting any more interrupts */
 
 	spin_lock_irqsave(&hvcsd->lock, flags);
 
diff --git a/drivers/char/ip2/i2lib.c b/drivers/char/ip2/i2lib.c
index e46120d..d6567b3 100644
--- a/drivers/char/ip2/i2lib.c
+++ b/drivers/char/ip2/i2lib.c
@@ -661,7 +661,7 @@ i2QueueCommands(int type, i2ChanStrPtr pCh, int timeout, int nCommands,
 		if (!in_interrupt()) {
 			schedule_timeout_interruptible(1);	// short nap
 		} else {
-			// we cannot sched/sleep in interrrupt silly
+			// we cannot sched/sleep in interrupt silly
 			return 0;   
 		}
 		if (signal_pending(current)) {
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index e04e66c..0f49ccf 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -1251,7 +1251,7 @@ ip2_poll(unsigned long arg)
 
 	// Just polled boards, IRQ = 0 will hit all non-interrupt boards.
 	// It will NOT poll boards handled by hard interrupts.
-	// The issue of queued BH interrups is handled in ip2_interrupt().
+	// The issue of queued BH interrupts is handled in ip2_interrupt().
 	ip2_polled_interrupt();
 
 	PollTimer.expires = POLL_TIMEOUT;
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index 905d1f5..d010ed9 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -1544,7 +1544,7 @@ static void mgsl_isr_receive_data( struct mgsl_struct *info )
 
 /* mgsl_isr_misc()
  * 
- * 	Service a miscellaneos interrupt source.
+ * 	Service a miscellaneous interrupt source.
  * 	
  * Arguments:		info		pointer to device extension (instance data)
  * Return Value:	None
diff --git a/drivers/char/toshiba.c b/drivers/char/toshiba.c
index 5422f99..ce5ebe3 100644
--- a/drivers/char/toshiba.c
+++ b/drivers/char/toshiba.c
@@ -505,7 +505,7 @@ static int __init toshiba_init(void)
 	if (tosh_probe())
 		return -ENODEV;
 
-	printk(KERN_INFO "Toshiba System Managment Mode driver v" TOSH_VERSION "\n");
+	printk(KERN_INFO "Toshiba System Management Mode driver v" TOSH_VERSION "\n");
 
 	/* set the port to use for Fn status if not specified as a parameter */
 	if (tosh_fn==0x00)
-- 
1.5.3.7.949.g2221a6

Re: [PATCH] arch/sh/: Spelling fixes

[Paul Mundt]

On Mon, Dec 17, 2007 at 11:30:18AM -0800, Joe Perches wrote:
>  arch/sh/boards/dreamcast/irq.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)

On Mon, Dec 17, 2007 at 11:30:19AM -0800, Joe Perches wrote:
>  include/asm-sh/hd64461.h   |   28 ++++++++++++++--------------
>  include/asm-sh/microdev.h  |    4 ++--
>  include/asm-sh/voyagergx.h |    2 +-
>  3 files changed, 17 insertions(+), 17 deletions(-)

Applied, thanks.

Re: [PATCH] include/asm-parisc/: Spelling fixes

[Grant Grundler]

Andrew,
Please include in -mm. "Cosmetic" - but I appreciate correct spelling too.

On Mon, Dec 17, 2007 at 11:30:11AM -0800, Joe Perches wrote:
> 
> Signed-off-by: Joe Perches <joe@perches.com>

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

thanks,
grant

> ---
>  include/asm-parisc/elf.h     |    2 +-
>  include/asm-parisc/linkage.h |    2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/include/asm-parisc/elf.h b/include/asm-parisc/elf.h
> index f628ac7..8e7946a 100644
> --- a/include/asm-parisc/elf.h
> +++ b/include/asm-parisc/elf.h
> @@ -28,7 +28,7 @@
>  #define EFA_PARISC_1_1		    0x0210 /* PA-RISC 1.1 big-endian.  */
>  #define EFA_PARISC_2_0		    0x0214 /* PA-RISC 2.0 big-endian.  */
>  
> -/* Additional section indeces.  */
> +/* Additional section indices.  */
>  
>  #define SHN_PARISC_ANSI_COMMON	0xff00	   /* Section for tenatively declared
>  					      symbols in ANSI C.  */
> diff --git a/include/asm-parisc/linkage.h b/include/asm-parisc/linkage.h
> index ad8cd0d..0b19a72 100644
> --- a/include/asm-parisc/linkage.h
> +++ b/include/asm-parisc/linkage.h
> @@ -8,7 +8,7 @@
>  
>  /*
>   * In parisc assembly a semicolon marks a comment while a
> - * exclamation mark is used to seperate independent lines.
> + * exclamation mark is used to separate independent lines.
>   */
>  #ifdef __ASSEMBLY__
>  
> -- 
> 1.5.3.7.949.g2221a6
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-parisc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] arch/s390/: Spelling fixes

[Martin Schwidefsky]

Hi Joe,
I've added all three spelling fix patches to the git390. The patch for
drivers lost one hunk because there is another patch in the git390 tree
that removes the comment you are trying to fix. Your patches will be
included in the big merge frenzy after 2.6.24 has been released.
Thanks.

-- 
blue skies,
  Martin.

"Reality continues to ruin my life." - Calvin.

Re: [PATCH] arch/x86/: Spelling fixes

[Ingo Molnar]

* Joe Perches <joe@perches.com> wrote:

> 
> Signed-off-by: Joe Perches <joe@perches.com>
> ---
>  arch/x86/kernel/apic_32.c    |    2 +-
>  arch/x86/kernel/mpparse_32.c |    2 +-
>  arch/x86/kernel/vm86_32.c    |    2 +-
>  arch/x86/mm/srat_64.c        |    2 +-

thanks, applied.

	Ingo

RE: [PATCH] drivers/block/: Spelling fixes

[Miller, Mike (OS Dev)]

> -----Original Message-----
> From: Joe Perches [mailto:joe@perches.com]
> Sent: Monday, December 17, 2007 1:30 PM
> To: linux-kernel@vger.kernel.org
> Cc: Andrew Morton; Miller, Mike (OS Dev); ISS StorageDev
> Subject: [PATCH] drivers/block/: Spelling fixes
>
>
> Signed-off-by: Joe Perches <joe@perches.com>

Acked-by: Mike Miller <mike.miller@hp.com>

> ---
>  drivers/block/cciss_scsi.c |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/block/cciss_scsi.c
> b/drivers/block/cciss_scsi.c index 63ee6c0..55178e9 100644
> --- a/drivers/block/cciss_scsi.c
> +++ b/drivers/block/cciss_scsi.c
> @@ -1453,7 +1453,7 @@ static int
> cciss_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
>         rc = sendcmd(CCISS_RESET_MSG, ctlr, NULL, 0, 2, 0, 0,
>                 (unsigned char *)
> &cmd_in_trouble->Header.LUN.LunAddrBytes[0],
>                 TYPE_MSG);
> -       /* sendcmd turned off interrputs on the board, turn
> 'em back on. */
> +       /* sendcmd turned off interrupts on the board, turn
> 'em back on.
> + */
>         (*c)->access.set_intr_mask(*c, CCISS_INTR_ON);
>         if (rc == 0)
>                 return SUCCESS;
> @@ -1483,7 +1483,7 @@ static int
> cciss_eh_abort_handler(struct scsi_cmnd *scsicmd)
>                 0, 2, 0, 0,
>                 (unsigned char *)
> &cmd_to_abort->Header.LUN.LunAddrBytes[0],
>                 TYPE_MSG);
> -       /* sendcmd turned off interrputs on the board, turn
> 'em back on. */
> +       /* sendcmd turned off interrupts on the board, turn
> 'em back on.
> + */
>         (*c)->access.set_intr_mask(*c, CCISS_INTR_ON);
>         if (rc == 0)
>                 return SUCCESS;
> --
> 1.5.3.7.949.g2221a6
>
>