From: "Huang, Ying" <ying.huang@intel.com>
To: Ingo Molnar <mingo@redhat.com>,
ThomasGleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>, Andi Kleen <ak@suse.de>
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH] x86: EFI runtime code mapping enhancement
Date: Wed, 13 Feb 2008 17:22:41 +0800 [thread overview]
Message-ID: <1202894561.5026.14.camel@caritas-dev.intel.com> (raw)
This patch enhances EFI runtime code memory mapping as following:
- Move __supported_pte_mask & _PAGE_NX checking before invoking
runtime_code_page_mkexec(). This makes it possible for compiler to
eliminate runtime_code_page_mkexec() on machine without NX support.
- Use set_memory_x/nx in early_mapping_set_exec(). This eliminates the
duplicated implementation.
This patch has been tested on Intel x86_64 platform with EFI64/32
firmware.
Signed-off-by: Huang Ying <ying.huang@intel.com>
---
arch/x86/kernel/efi.c | 6 ++----
arch/x86/kernel/efi_64.c | 30 ++++++++++++------------------
2 files changed, 14 insertions(+), 22 deletions(-)
--- a/arch/x86/kernel/efi.c
+++ b/arch/x86/kernel/efi.c
@@ -384,9 +384,6 @@ static void __init runtime_code_page_mke
efi_memory_desc_t *md;
void *p;
- if (!(__supported_pte_mask & _PAGE_NX))
- return;
-
/* Make EFI runtime service code area executable */
for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
md = p;
@@ -476,7 +473,8 @@ void __init efi_enter_virtual_mode(void)
efi.get_next_high_mono_count = virt_efi_get_next_high_mono_count;
efi.reset_system = virt_efi_reset_system;
efi.set_virtual_address_map = virt_efi_set_virtual_address_map;
- runtime_code_page_mkexec();
+ if (__supported_pte_mask & _PAGE_NX)
+ runtime_code_page_mkexec();
early_iounmap(memmap.map, memmap.nr_map * memmap.desc_size);
memmap.map = NULL;
}
--- a/arch/x86/kernel/efi_64.c
+++ b/arch/x86/kernel/efi_64.c
@@ -35,6 +35,7 @@
#include <asm/tlbflush.h>
#include <asm/proto.h>
#include <asm/efi.h>
+#include <asm/cacheflush.h>
static pgd_t save_pgd __initdata;
static unsigned long efi_flags __initdata;
@@ -43,22 +44,15 @@ static void __init early_mapping_set_exe
unsigned long end,
int executable)
{
- pte_t *kpte;
- unsigned int level;
+ unsigned long num_pages;
- while (start < end) {
- kpte = lookup_address((unsigned long)__va(start), &level);
- BUG_ON(!kpte);
- if (executable)
- set_pte(kpte, pte_mkexec(*kpte));
- else
- set_pte(kpte, __pte((pte_val(*kpte) | _PAGE_NX) & \
- __supported_pte_mask));
- if (level == PG_LEVEL_4K)
- start = (start + PAGE_SIZE) & PAGE_MASK;
- else
- start = (start + PMD_SIZE) & PMD_MASK;
- }
+ start &= PMD_MASK;
+ end = (end + PMD_SIZE - 1) & PMD_MASK;
+ num_pages = (end - start) >> PAGE_SHIFT;
+ if (executable)
+ set_memory_x((unsigned long)__va(start), num_pages);
+ else
+ set_memory_nx((unsigned long)__va(start), num_pages);
}
static void __init early_runtime_code_mapping_set_exec(int executable)
@@ -74,7 +68,7 @@ static void __init early_runtime_code_ma
md = p;
if (md->type == EFI_RUNTIME_SERVICES_CODE) {
unsigned long end;
- end = md->phys_addr + (md->num_pages << PAGE_SHIFT);
+ end = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT);
early_mapping_set_exec(md->phys_addr, end, executable);
}
}
@@ -84,8 +78,8 @@ void __init efi_call_phys_prelog(void)
{
unsigned long vaddress;
- local_irq_save(efi_flags);
early_runtime_code_mapping_set_exec(1);
+ local_irq_save(efi_flags);
vaddress = (unsigned long)__va(0x0UL);
save_pgd = *pgd_offset_k(0x0UL);
set_pgd(pgd_offset_k(0x0UL), *pgd_offset_k(vaddress));
@@ -98,9 +92,9 @@ void __init efi_call_phys_epilog(void)
* After the lock is released, the original page table is restored.
*/
set_pgd(pgd_offset_k(0x0UL), save_pgd);
- early_runtime_code_mapping_set_exec(0);
__flush_tlb_all();
local_irq_restore(efi_flags);
+ early_runtime_code_mapping_set_exec(0);
}
void __init efi_reserve_bootmem(void)
next reply other threads:[~2008-02-13 9:35 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-13 9:22 Huang, Ying [this message]
2008-02-13 11:32 ` [PATCH] x86: EFI runtime code mapping enhancement Andi Kleen
2008-02-14 1:46 ` Huang, Ying
2008-02-14 12:06 ` Andi Kleen
2008-02-15 2:10 ` Huang, Ying
2008-02-15 2:25 ` Huang, Ying
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1202894561.5026.14.camel@caritas-dev.intel.com \
--to=ying.huang@intel.com \
--cc=ak@suse.de \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox