power_state: remove it from usb

power_state: remove it from usb

[Pavel Machek]

power_state is scheduled for removal, and it is used only write-only
by USB. Remove it.

Signed-off-by: Pavel Machek <pavel@suse.cz>

diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 801b6f1..eeb8115 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -794,8 +794,6 @@ static int usb_suspend_device(struct usb
 
  done:
 	dev_vdbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
-	if (status == 0)
-		udev->dev.power.power_state.event = msg.event;
 	return status;
 }
 
@@ -826,7 +824,6 @@ static int usb_resume_device(struct usb_
 	dev_vdbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
 	if (status == 0) {
 		udev->autoresume_disabled = 0;
-		udev->dev.power.power_state.event = PM_EVENT_ON;
 	}
 	return status;
 }
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 84760dd..739407b 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -73,7 +73,6 @@ int usb_hcd_pci_probe(struct pci_dev *de
 	if (pci_enable_device(dev) < 0)
 		return -ENODEV;
 	dev->current_state = PCI_D0;
-	dev->dev.power.power_state = PMSG_ON;
 
 	if (!dev->irq) {
 		dev_err(&dev->dev,
@@ -302,8 +301,6 @@ int usb_hcd_pci_suspend(struct pci_dev *
 
 done:
 	if (retval == 0) {
-		dev->dev.power.power_state = PMSG_SUSPEND;
-
 #ifdef CONFIG_PPC_PMAC
 		/* Disable ASIC clocks for USB */
 		if (machine_is(powermac)) {
@@ -406,8 +403,6 @@ #endif
 	pci_set_master(dev);
 	pci_restore_state(dev);
 
-	dev->dev.power.power_state = PMSG_ON;
-
 	clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
 
 	if (hcd->driver->resume) {
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 2375194..1bf8ccb 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -114,13 +114,11 @@ static inline int is_usb_device_driver(s
 static inline void mark_active(struct usb_interface *f)
 {
 	f->is_active = 1;
-	f->dev.power.power_state.event = PM_EVENT_ON;
 }
 
 static inline void mark_quiesced(struct usb_interface *f)
 {
 	f->is_active = 0;
-	f->dev.power.power_state.event = PM_EVENT_SUSPEND;
 }
 
 static inline int is_active(const struct usb_interface *f)


-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

patch power_state-remove-it-from-usb.patch added to gregkh-2.6 tree

[gregkh]

This is a note to let you know that I've just added the patch titled

     Subject: power_state: remove it from usb

to my gregkh-2.6 tree.  Its filename is

     power_state-remove-it-from-usb.patch

This tree can be found at 
    http://www.kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/patches/


>From pavel@ucw.cz  Thu Feb 21 13:36:03 2008
From: Pavel Machek <pavel@ucw.cz>
Date: Thu, 21 Feb 2008 14:01:45 +0100
Subject: power_state: remove it from usb
To: kernel list <linux-kernel@vger.kernel.org>, Linux-pm mailing list <linux-pm@lists.osdl.org>, Greg KH <greg@kroah.com>, stern@rowland.harvard.edu, linux-usb@vger.kernel.org
Message-ID: <20080221130145.GA3789@elf.ucw.cz>
Content-Disposition: inline



power_state is scheduled for removal, and it is used only write-only
by USB. Remove it.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/core/driver.c  |    3 ---
 drivers/usb/core/hcd-pci.c |    5 -----
 drivers/usb/core/usb.h     |    2 --
 3 files changed, 10 deletions(-)

--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -794,8 +794,6 @@ static int usb_suspend_device(struct usb
 
  done:
 	dev_vdbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
-	if (status == 0)
-		udev->dev.power.power_state.event = msg.event;
 	return status;
 }
 
@@ -826,7 +824,6 @@ static int usb_resume_device(struct usb_
 	dev_vdbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
 	if (status == 0) {
 		udev->autoresume_disabled = 0;
-		udev->dev.power.power_state.event = PM_EVENT_ON;
 	}
 	return status;
 }
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -73,7 +73,6 @@ int usb_hcd_pci_probe(struct pci_dev *de
 	if (pci_enable_device(dev) < 0)
 		return -ENODEV;
 	dev->current_state = PCI_D0;
-	dev->dev.power.power_state = PMSG_ON;
 
 	if (!dev->irq) {
 		dev_err(&dev->dev,
@@ -302,8 +301,6 @@ int usb_hcd_pci_suspend(struct pci_dev *
 
 done:
 	if (retval == 0) {
-		dev->dev.power.power_state = PMSG_SUSPEND;
-
 #ifdef CONFIG_PPC_PMAC
 		/* Disable ASIC clocks for USB */
 		if (machine_is(powermac)) {
@@ -406,8 +403,6 @@ int usb_hcd_pci_resume(struct pci_dev *d
 	pci_set_master(dev);
 	pci_restore_state(dev);
 
-	dev->dev.power.power_state = PMSG_ON;
-
 	clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
 
 	if (hcd->driver->resume) {
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -114,13 +114,11 @@ static inline int is_usb_device_driver(s
 static inline void mark_active(struct usb_interface *f)
 {
 	f->is_active = 1;
-	f->dev.power.power_state.event = PM_EVENT_ON;
 }
 
 static inline void mark_quiesced(struct usb_interface *f)
 {
 	f->is_active = 0;
-	f->dev.power.power_state.event = PM_EVENT_SUSPEND;
 }
 
 static inline int is_active(const struct usb_interface *f)


Patches currently in gregkh-2.6 which might be from pavel@ucw.cz are

driver/driver-core-pm-make-suspend_device-static.patch
driver/pm-remove-unbalanced-mutex_unlock-from-dpm_resume.patch
driver/power_state-remove-it-from-driver-core.patch
usb/power_state-remove-it-from-usb.patch

Re: [linux-pm] patch power_state-remove-it-from-usb.patch added to gregkh-2.6 tree

[Alan Stern]

On Thu, 21 Feb 2008 gregkh@suse.de wrote:

> This is a note to let you know that I've just added the patch titled
> 
>      Subject: power_state: remove it from usb
> 
> to my gregkh-2.6 tree.  Its filename is
> 
>      power_state-remove-it-from-usb.patch
> 
> This tree can be found at 
>     http://www.kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/patches/
> 
> 
> From pavel@ucw.cz  Thu Feb 21 13:36:03 2008
> From: Pavel Machek <pavel@ucw.cz>
> Date: Thu, 21 Feb 2008 14:01:45 +0100
> Subject: power_state: remove it from usb
> To: kernel list <linux-kernel@vger.kernel.org>, Linux-pm mailing list <linux-pm@lists.osdl.org>, Greg KH <greg@kroah.com>, stern@rowland.harvard.edu, linux-usb@vger.kernel.org
> Message-ID: <20080221130145.GA3789@elf.ucw.cz>
> Content-Disposition: inline
> 
> 
> 
> power_state is scheduled for removal, and it is used only write-only
> by USB. Remove it.

Greg, this patch is incomplete.  Some of the settings that Pavel 
removed are used by the host controller drivers.  Please revert this; 
I'll send a more complete patch later.

Alan Stern

Re: [linux-pm] patch power_state-remove-it-from-usb.patch added to gregkh-2.6 tree

[Pavel Machek]

On Thu 2008-02-21 17:18:32, Alan Stern wrote:
> On Thu, 21 Feb 2008 gregkh@suse.de wrote:
> 
> > This is a note to let you know that I've just added the patch titled
> > 
> >      Subject: power_state: remove it from usb
> > 
> > to my gregkh-2.6 tree.  Its filename is
> > 
> >      power_state-remove-it-from-usb.patch
> > 
> > This tree can be found at 
> >     http://www.kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/patches/
> > 
> > 
> > From pavel@ucw.cz  Thu Feb 21 13:36:03 2008
> > From: Pavel Machek <pavel@ucw.cz>
> > Date: Thu, 21 Feb 2008 14:01:45 +0100
> > Subject: power_state: remove it from usb
> > To: kernel list <linux-kernel@vger.kernel.org>, Linux-pm mailing list <linux-pm@lists.osdl.org>, Greg KH <greg@kroah.com>, stern@rowland.harvard.edu, linux-usb@vger.kernel.org
> > Message-ID: <20080221130145.GA3789@elf.ucw.cz>
> > Content-Disposition: inline
> > 
> > 
> > 
> > power_state is scheduled for removal, and it is used only write-only
> > by USB. Remove it.
> 
> Greg, this patch is incomplete.  Some of the settings that Pavel 
> removed are used by the host controller drivers.  Please revert this; 
> I'll send a more complete patch later.

Alan is right, I was blind... and my config was not affected...
...
host/sl811-hcd.c:	if (dev->dev.power.power_state.event == PM_EVENT_SUSPEND
misc/usbtest.c:	if (intf->dev.power.power_state.event != PM_EVENT_ON) {
...

									Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: [linux-pm] patch power_state-remove-it-from-usb.patch added to gregkh-2.6 tree

[Greg KH]

On Thu, Feb 21, 2008 at 11:22:02PM +0100, Pavel Machek wrote:
> On Thu 2008-02-21 17:18:32, Alan Stern wrote:
> > On Thu, 21 Feb 2008 gregkh@suse.de wrote:
> > 
> > > This is a note to let you know that I've just added the patch titled
> > > 
> > >      Subject: power_state: remove it from usb
> > > 
> > > to my gregkh-2.6 tree.  Its filename is
> > > 
> > >      power_state-remove-it-from-usb.patch
> > > 
> > > This tree can be found at 
> > >     http://www.kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/patches/
> > > 
> > > 
> > > From pavel@ucw.cz  Thu Feb 21 13:36:03 2008
> > > From: Pavel Machek <pavel@ucw.cz>
> > > Date: Thu, 21 Feb 2008 14:01:45 +0100
> > > Subject: power_state: remove it from usb
> > > To: kernel list <linux-kernel@vger.kernel.org>, Linux-pm mailing list <linux-pm@lists.osdl.org>, Greg KH <greg@kroah.com>, stern@rowland.harvard.edu, linux-usb@vger.kernel.org
> > > Message-ID: <20080221130145.GA3789@elf.ucw.cz>
> > > Content-Disposition: inline
> > > 
> > > 
> > > 
> > > power_state is scheduled for removal, and it is used only write-only
> > > by USB. Remove it.
> > 
> > Greg, this patch is incomplete.  Some of the settings that Pavel 
> > removed are used by the host controller drivers.  Please revert this; 
> > I'll send a more complete patch later.
> 
> Alan is right, I was blind... and my config was not affected...
> ...
> host/sl811-hcd.c:	if (dev->dev.power.power_state.event == PM_EVENT_SUSPEND
> misc/usbtest.c:	if (intf->dev.power.power_state.event != PM_EVENT_ON) {
> ...

Will do, thanks for letting me know.

greg k-h

Re: power_state: remove it from usb

[Alan Stern]

On Thu, 21 Feb 2008, Pavel Machek wrote:

> power_state is scheduled for removal, and it is used only write-only
> by USB. Remove it.

Unfortunately some of the things you changed turn out not to be 
write-only.  (You also missed a usage of power.power_state in a 
comment!)  I'll post a more complete patch soon.

Alan Stern

Re: power_state: remove it from usb

[Pavel Machek]

On Thu 2008-02-21 16:50:36, Alan Stern wrote:
> On Thu, 21 Feb 2008, Pavel Machek wrote:
> 
> > power_state is scheduled for removal, and it is used only write-only
> > by USB. Remove it.
> 
> Unfortunately some of the things you changed turn out not to be 
> write-only.  (You also missed a usage of power.power_state in a 
> comment!)  

I might have missed comments, but where I missed read? It compiled
after I removed the field from the core...?

> I'll post a more complete patch soon.		

Thanks!
							Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: power_state: remove it from usb

[Alan Stern]

On Thu, 21 Feb 2008, Pavel Machek wrote:

> > Unfortunately some of the things you changed turn out not to be 
> > write-only.  (You also missed a usage of power.power_state in a 
> > comment!)  
> 
> I might have missed comments, but where I missed read? It compiled
> after I removed the field from the core...?

Grep for power_state in drivers/usb/host/*.c.

Alan Stern