From: Harvey Harrison <harvey.harrison@gmail.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH] mips: replace remaining __FUNCTION__ occurances
Date: Mon, 03 Mar 2008 10:32:40 -0800 [thread overview]
Message-ID: <1204569160.3266.29.camel@brick> (raw)
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
---
arch/mips/au1000/common/power.c | 2 +-
arch/mips/kernel/signal-common.h | 2 +-
arch/mips/pci/ops-pnx8550.c | 4 ++--
arch/mips/sgi-ip32/ip32-reset.c | 2 +-
.../tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c | 2 +-
.../toshiba_rbtx4927/toshiba_rbtx4927_setup.c | 2 +-
6 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c
index 54047d6..ca4b3de 100644
--- a/arch/mips/au1000/common/power.c
+++ b/arch/mips/au1000/common/power.c
@@ -47,7 +47,7 @@
#define DEBUG 1
#ifdef DEBUG
-# define DPRINTK(fmt, args...) printk("%s: " fmt, __FUNCTION__ , ## args)
+# define DPRINTK(fmt, args...) printk("%s: " fmt, __func__, ## args)
#else
# define DPRINTK(fmt, args...)
#endif
diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h
index c0faabd..6c8e8c4 100644
--- a/arch/mips/kernel/signal-common.h
+++ b/arch/mips/kernel/signal-common.h
@@ -14,7 +14,7 @@
/* #define DEBUG_SIG */
#ifdef DEBUG_SIG
-# define DEBUGP(fmt, args...) printk("%s: " fmt, __FUNCTION__ , ##args)
+# define DEBUGP(fmt, args...) printk("%s: " fmt, __func__, ##args)
#else
# define DEBUGP(fmt, args...)
#endif
diff --git a/arch/mips/pci/ops-pnx8550.c b/arch/mips/pci/ops-pnx8550.c
index d610646..0e160d9 100644
--- a/arch/mips/pci/ops-pnx8550.c
+++ b/arch/mips/pci/ops-pnx8550.c
@@ -90,14 +90,14 @@ config_access(unsigned int pci_cmd, struct pci_bus *bus, unsigned int devfn, int
loops--;
if (loops == 0) {
- printk("%s : Arbiter Locked.\n", __FUNCTION__);
+ printk("%s : Arbiter Locked.\n", __func__);
}
}
clear_status();
if ((pci_cmd == PCI_CMD_IOR) || (pci_cmd == PCI_CMD_IOW)) {
printk("%s timeout (GPPM_CTRL=%X) ioaddr %lX pci_cmd %X\n",
- __FUNCTION__, inl(PCI_BASE | PCI_GPPM_CTRL), ioaddr,
+ __func__, inl(PCI_BASE | PCI_GPPM_CTRL), ioaddr,
pci_cmd);
}
diff --git a/arch/mips/sgi-ip32/ip32-reset.c b/arch/mips/sgi-ip32/ip32-reset.c
index 624bbdb..b6cab08 100644
--- a/arch/mips/sgi-ip32/ip32-reset.c
+++ b/arch/mips/sgi-ip32/ip32-reset.c
@@ -142,7 +142,7 @@ static irqreturn_t ip32_rtc_int(int irq, void *dev_id)
reg_c = CMOS_READ(RTC_INTR_FLAGS);
if (!(reg_c & RTC_IRQF)) {
printk(KERN_WARNING
- "%s: RTC IRQ without RTC_IRQF\n", __FUNCTION__);
+ "%s: RTC IRQ without RTC_IRQF\n", __func__);
}
/* Wait until interrupt goes away */
disable_irq(MACEISA_RTC_IRQ);
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
index 3f808b6..6d31f2a 100644
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
+++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
@@ -173,7 +173,7 @@ static const u32 toshiba_rbtx4927_irq_debug_flag =
{ \
char tmp[100]; \
sprintf( tmp, str ); \
- printk( "%s(%s:%u)::%s", __FUNCTION__, __FILE__, __LINE__, tmp ); \
+ printk( "%s(%s:%u)::%s", __func__, __FILE__, __LINE__, tmp ); \
}
#else
#define TOSHIBA_RBTX4927_IRQ_DPRINTK(flag, str...)
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
index e466e5e..2203c77 100644
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
+++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
@@ -93,7 +93,7 @@ static const u32 toshiba_rbtx4927_setup_debug_flag =
{ \
char tmp[100]; \
sprintf( tmp, str ); \
- printk( "%s(%s:%u)::%s", __FUNCTION__, __FILE__, __LINE__, tmp ); \
+ printk( "%s(%s:%u)::%s", __func__, __FILE__, __LINE__, tmp ); \
}
#else
#define TOSHIBA_RBTX4927_SETUP_DPRINTK(flag, str...)
--
1.5.4.3.500.g83a2c
reply other threads:[~2008-03-03 18:32 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1204569160.3266.29.camel@brick \
--to=harvey.harrison@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox