linux-kernel@vger.kernel.org

[bruno.roussel@free.fr]

Hi !

I have this report in dmesg :


saa7146_vv: saa7146 (0): registered device video0 [v4l2]
saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
dvb-usb: found a 'Hauppauge WinTV-NOVA-T usb2' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Hauppauge WinTV-NOVA-T usb2)
dvb-usb: MAC address: 00:0d:fe:00:00:00
DVB: registering frontend 1 (DiBcom 3000MC/P)...

=============================================
[ INFO: possible recursive locking detected ]
2.6.24.2-1mdv #1
---------------------------------------------
modprobe/2082 is trying to acquire lock:
 (&adap->bus_lock){--..}, at: [<eeed4133>] i2c_transfer+0x2c/0x4b [i2c_core]

but task is already holding lock:
 (&adap->bus_lock){--..}, at: [<eeed4133>] i2c_transfer+0x2c/0x4b [i2c_core]

other info that might help us debug this:
1 lock held by modprobe/2082:
 #0:  (&adap->bus_lock){--..}, at: [<eeed4133>] i2c_transfer+0x2c/0x4b
[i2c_core]

stack backtrace:
Pid: 2082, comm: modprobe Not tainted 2.6.24.2-1mdv #1
 [<c01054c2>] show_trace_log_lvl+0x1a/0x2f
 [<c0105ccf>] show_trace+0x12/0x14
 [<c0105fd7>] dump_stack+0x6a/0x70
 [<c0139e5b>] __lock_acquire+0x16b/0xc32
 [<c013ad80>] lock_acquire+0x70/0x92
 [<c02c937f>] mutex_lock_nested+0xf9/0x2a4
 [<eeed4133>] i2c_transfer+0x2c/0x4b [i2c_core]
 [<eef611fb>] dibx000_i2c_gated_tuner_xfer+0x172/0x18c [dibx000_common]
 [<eeed4140>] i2c_transfer+0x39/0x4b [i2c_core]
 [<eefbc17c>] mt2060_readreg+0x48/0x68 [mt2060]
 [<eefbc486>] mt2060_attach+0x49/0x1ef [mt2060]
 [<eefa3527>] dibusb_dib3000mc_tuner_attach+0x145/0x1fb [dvb_usb_dibusb_common]
 [<eef83c49>] dvb_usb_adapter_frontend_init+0xc4/0xe8 [dvb_usb]
 [<eef837aa>] dvb_usb_device_init+0x3e8/0x4ce [dvb_usb]
 [<eef7f01c>] nova_t_probe+0x1c/0x1e [dvb_usb_nova_t_usb2]
 [<eeeb1f51>] usb_probe_interface+0xd5/0x112 [usbcore]
 [<c02420bb>] driver_probe_device+0xca/0x14d
 [<c0242225>] __driver_attach+0x4a/0x7f
 [<c024164f>] bus_for_each_dev+0x38/0x5a
 [<c0241f25>] driver_attach+0x19/0x1b
 [<c0241966>] bus_add_driver+0x76/0x194
 [<c02423dd>] driver_register+0x67/0x6c
 [<eeeb1ae7>] usb_register_driver+0x7e/0xe5 [usbcore]
 [<eef8d01b>] nova_t_module_init+0x1b/0x38 [dvb_usb_nova_t_usb2]
 [<c0140e78>] sys_init_module+0x12c6/0x1394
 [<c0103e12>] sysenter_past_esp+0x6b/0xc9
 =======================
input: IR-receiver inside an USB DVB receiver as /class/input/input2
dvb-usb: schedule remote query interval to 100 msecs.
dvb-usb: Hauppauge WinTV-NOVA-T usb2 successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_nova_t_usb2
DVB: registering frontend 0 (ST STV0299 DVB-S)...
input: DVB on-card IR receiver as /class/input/input3
dvb-ttpci: found av7110-0.