From: "Denis V. Lunev" <den@openvz.org>
To: akpm@linux-foundation.org
Cc: linux-kernel@vger.kernel.org, "Denis V. Lunev" <den@openvz.org>
Subject: [PATCH 28/29] drivers: use non-racy method for proc entries creation
Date: Tue, 8 Apr 2008 15:19:35 +0400 [thread overview]
Message-ID: <1207653576-12640-28-git-send-email-den@openvz.org> (raw)
In-Reply-To: <1207653508.7171.18.camel@iris.sw.ru>
Use proc_create()/proc_create_data() to make sure that ->proc_fops and
->data be setup before gluing PDE to main tree.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/i8k.c | 6 ++----
drivers/char/misc.c | 27 +++++++++++++++------------
drivers/char/rtc.c | 6 ++----
drivers/char/toshiba.c | 3 +--
drivers/char/viotape.c | 9 +++------
5 files changed, 23 insertions(+), 28 deletions(-)
diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c
index 8609b82..f49037b 100644
--- a/drivers/char/i8k.c
+++ b/drivers/char/i8k.c
@@ -82,6 +82,7 @@ static int i8k_ioctl(struct inode *, struct file *, unsigned int,
unsigned long);
static const struct file_operations i8k_fops = {
+ .owner = THIS_MODULE,
.open = i8k_open_fs,
.read = seq_read,
.llseek = seq_lseek,
@@ -554,13 +555,10 @@ static int __init i8k_init(void)
return -ENODEV;
/* Register the proc entry */
- proc_i8k = create_proc_entry("i8k", 0, NULL);
+ proc_i8k = proc_create("i8k", 0, NULL, &i8k_fops);
if (!proc_i8k)
return -ENOENT;
- proc_i8k->proc_fops = &i8k_fops;
- proc_i8k->owner = THIS_MODULE;
-
printk(KERN_INFO
"Dell laptop SMM driver v%s Massimo Dal Zotto (dz@debian.org)\n",
I8K_VERSION);
diff --git a/drivers/char/misc.c b/drivers/char/misc.c
index bc717e4..2f8ceb0 100644
--- a/drivers/char/misc.c
+++ b/drivers/char/misc.c
@@ -262,23 +262,26 @@ EXPORT_SYMBOL(misc_deregister);
static int __init misc_init(void)
{
-#ifdef CONFIG_PROC_FS
- struct proc_dir_entry *ent;
+ int err;
- ent = create_proc_entry("misc", 0, NULL);
- if (ent)
- ent->proc_fops = &misc_proc_fops;
+#ifdef CONFIG_PROC_FS
+ proc_create("misc", 0, NULL, &misc_proc_fops);
#endif
misc_class = class_create(THIS_MODULE, "misc");
+ err = PTR_ERR(misc_class);
if (IS_ERR(misc_class))
- return PTR_ERR(misc_class);
+ goto fail_remove;
- if (register_chrdev(MISC_MAJOR,"misc",&misc_fops)) {
- printk("unable to get major %d for misc devices\n",
- MISC_MAJOR);
- class_destroy(misc_class);
- return -EIO;
- }
+ err = -EIO;
+ if (register_chrdev(MISC_MAJOR,"misc",&misc_fops))
+ goto fail_printk;
return 0;
+
+fail_printk:
+ printk("unable to get major %d for misc devices\n", MISC_MAJOR);
+ class_destroy(misc_class);
+fail_remove:
+ remove_proc_entry("misc", NULL);
+ return err;
}
subsys_initcall(misc_init);
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index 5c3142b..b775df9 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -1068,10 +1068,8 @@ no_irq:
}
#ifdef CONFIG_PROC_FS
- ent = create_proc_entry("driver/rtc", 0, NULL);
- if (ent)
- ent->proc_fops = &rtc_proc_fops;
- else
+ ent = proc_create("driver/rtc", 0, NULL, &rtc_proc_fops);
+ if (!ent)
printk(KERN_WARNING "rtc: Failed to register with procfs.\n");
#endif
diff --git a/drivers/char/toshiba.c b/drivers/char/toshiba.c
index ce5ebe3..64f1cee 100644
--- a/drivers/char/toshiba.c
+++ b/drivers/char/toshiba.c
@@ -520,12 +520,11 @@ static int __init toshiba_init(void)
{
struct proc_dir_entry *pde;
- pde = create_proc_entry("toshiba", 0, NULL);
+ pde = proc_create("toshiba", 0, NULL, &proc_toshiba_fops);
if (!pde) {
misc_deregister(&tosh_device);
return -ENOMEM;
}
- pde->proc_fops = &proc_toshiba_fops;
}
#endif
diff --git a/drivers/char/viotape.c b/drivers/char/viotape.c
index db7a731..58aad63 100644
--- a/drivers/char/viotape.c
+++ b/drivers/char/viotape.c
@@ -249,6 +249,7 @@ static int proc_viotape_open(struct inode *inode, struct file *file)
}
static const struct file_operations proc_viotape_operations = {
+ .owner = THIS_MODULE,
.open = proc_viotape_open,
.read = seq_read,
.llseek = seq_lseek,
@@ -915,7 +916,6 @@ static struct vio_driver viotape_driver = {
int __init viotap_init(void)
{
int ret;
- struct proc_dir_entry *e;
if (!firmware_has_feature(FW_FEATURE_ISERIES))
return -ENODEV;
@@ -968,11 +968,8 @@ int __init viotap_init(void)
if (ret)
goto unreg_class;
- e = create_proc_entry("iSeries/viotape", S_IFREG|S_IRUGO, NULL);
- if (e) {
- e->owner = THIS_MODULE;
- e->proc_fops = &proc_viotape_operations;
- }
+ proc_create("iSeries/viotape", S_IFREG|S_IRUGO, NULL,
+ &proc_viotape_operations);
return 0;
--
1.5.3.rc5
next prev parent reply other threads:[~2008-04-08 11:25 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-08 11:18 [PATCH 0/29] proc entries creation race Denis V. Lunev
2008-04-08 11:19 ` [PATCH 1/29] proc: introduce proc_create_data to setup de->data Denis V. Lunev
2008-04-08 11:19 ` [PATCH 2/29] nfsd: use proc_create to setup de->proc_fops Denis V. Lunev
2008-04-08 11:19 ` [PATCH 3/29] nfs: " Denis V. Lunev
2008-04-08 11:19 ` [PATCH 4/29] afs: use non-racy method for proc entries creation Denis V. Lunev
2008-04-08 11:19 ` [PATCH 5/29] ext4: " Denis V. Lunev
2008-04-08 11:19 ` [PATCH 6/29] reiserfs: " Denis V. Lunev
2008-04-08 11:19 ` [PATCH 7/29] jbd2: " Denis V. Lunev
2008-04-08 11:19 ` [PATCH 8/29] proc: use non-racy method for /proc/page_owner creation Denis V. Lunev
2008-04-08 11:19 ` [PATCH 9/29] sysvipc: use non-racy method for proc entries creation Denis V. Lunev
2008-04-08 11:19 ` [PATCH 10/29] mm: use non-racy method for /proc/swaps creation Denis V. Lunev
2008-04-08 11:19 ` [PATCH 11/29] sound: use non-racy method for /proc/driver/snd-page-alloc creation Denis V. Lunev
2008-04-08 11:19 ` [PATCH 12/29] zorro: use non-racy method for proc entries creation Denis V. Lunev
2008-04-08 11:19 ` [PATCH 13/29] samples: use non-racy method for /proc/marker-example creation Denis V. Lunev
2008-04-08 11:19 ` [PATCH 14/29] scsi: use non-racy method for proc entries creation Denis V. Lunev
2008-04-08 11:19 ` [PATCH 15/29] usb: " Denis V. Lunev
2008-04-08 11:19 ` [PATCH 16/29] s390: " Denis V. Lunev
2008-04-08 11:19 ` [PATCH 17/29] arm: use non-racy method for /proc/davinci_clocks creation Denis V. Lunev
2008-04-08 11:19 ` [PATCH 18/29] avr32: proc: use non-racy method for /proc/tlb creation Denis V. Lunev
2008-04-08 11:19 ` [PATCH 19/29] cris: use non-racy method for /proc/system_profile creation Denis V. Lunev
2008-04-08 11:19 ` [PATCH 20/29] ia64: use non-racy method for proc entries creation Denis V. Lunev
2008-04-08 11:19 ` [PATCH 21/29] parisc: use non-racy method for /proc/pcxl_dma creation Denis V. Lunev
2008-04-08 11:19 ` [PATCH 22/29] powerpc: use non-racy method for proc entries creation Denis V. Lunev
2008-04-08 11:19 ` [PATCH 23/29] acpi: " Denis V. Lunev
2008-04-08 11:19 ` [PATCH 24/29] net: " Denis V. Lunev
2008-04-08 11:19 ` [PATCH 25/29] isdn: " Denis V. Lunev
2008-04-30 17:57 ` [patch, -git] isdn: hysdn_procconf.c build fix Ingo Molnar
2008-04-30 18:10 ` Andrew Morton
2008-04-30 18:30 ` Ingo Molnar
2008-04-30 18:47 ` Andrew Morton
2008-04-30 19:03 ` Denis V. Lunev
2008-04-30 19:14 ` Andrew Morton
2008-04-30 19:24 ` Harvey Harrison
2008-04-30 21:21 ` Alexey Dobriyan
2008-04-08 11:19 ` [PATCH 26/29] kernel: use non-racy method for proc entries creation Denis V. Lunev
2008-04-08 11:19 ` [PATCH 27/29] parisc: " Denis V. Lunev
2008-04-08 11:19 ` Denis V. Lunev [this message]
2008-04-08 11:19 ` [PATCH 29/29] drivers: " Denis V. Lunev
2008-04-17 17:13 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1207653576-12640-28-git-send-email-den@openvz.org \
--to=den@openvz.org \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox