From: Harvey Harrison <harvey.harrison@gmail.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH 08/12] sh: kgdb-stub.c, sh-sci.c use the common ascii hex helpers
Date: Fri, 02 May 2008 12:01:54 -0700 [thread overview]
Message-ID: <1209754914.26173.33.camel@brick> (raw)
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
---
arch/sh/kernel/kgdb_stub.c | 16 ++++++++--------
drivers/serial/sh-sci.c | 8 ++++----
include/asm-sh/kgdb.h | 14 --------------
3 files changed, 12 insertions(+), 26 deletions(-)
diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c
index d453c3a..98cdb2b 100644
--- a/arch/sh/kernel/kgdb_stub.c
+++ b/arch/sh/kernel/kgdb_stub.c
@@ -274,8 +274,8 @@ static char *mem_to_hex(const char *mem, char *buf, const int count)
}
for (i = 0; i < count; i++) {
ch = *mem++;
- *buf++ = highhex(ch);
- *buf++ = lowhex(ch);
+ *buf++ = hex_asc_hi(ch);
+ *buf++ = hex_asc_lo(ch);
}
*buf = 0;
return (buf);
@@ -333,8 +333,8 @@ static char *ebin_to_mem(const char *buf, char *mem, int count)
/* Pack a hex byte */
static char *pack_hex_byte(char *pkt, int byte)
{
- *pkt++ = hexchars[(byte >> 4) & 0xf];
- *pkt++ = hexchars[(byte & 0xf)];
+ *pkt++ = hex_asc_hi(byte);
+ *pkt++ = hex_asc_lo(byte);
return pkt;
}
@@ -435,8 +435,8 @@ static void put_packet(char *buffer)
/* '#' Separator, put high and low components of checksum */
put_debug_char('#');
- put_debug_char(highhex(checksum));
- put_debug_char(lowhex(checksum));
+ put_debug_char(hex_asc_hi(checksum));
+ put_debug_char(hex_asc_lo(checksum));
}
while ((get_debug_char()) != '+'); /* While no ack */
}
@@ -658,8 +658,8 @@ static void undo_single_step(void)
static void send_signal_msg(const int signum)
{
out_buffer[0] = 'S';
- out_buffer[1] = highhex(signum);
- out_buffer[2] = lowhex(signum);
+ out_buffer[1] = hex_asc_hi(signum);
+ out_buffer[2] = hex_asc_lo(signum);
out_buffer[3] = 0;
put_packet(out_buffer);
}
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 9691061..6c1d3fc 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -186,15 +186,15 @@ static void put_string(struct sci_port *sci_port, const char *buffer, int count)
int h, l;
c = *p++;
- h = highhex(c);
- l = lowhex(c);
+ h = hex_asc_hi(c);
+ l = hex_asc_lo(c);
put_char(port, h);
put_char(port, l);
checksum += h + l;
}
put_char(port, '#');
- put_char(port, highhex(checksum));
- put_char(port, lowhex(checksum));
+ put_char(port, hex_asc_hi(checksum));
+ put_char(port, hex_asc_lo(checksum));
} while (get_char(port) != '+');
} else
#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
diff --git a/include/asm-sh/kgdb.h b/include/asm-sh/kgdb.h
index 4bc8cb1..24e4207 100644
--- a/include/asm-sh/kgdb.h
+++ b/include/asm-sh/kgdb.h
@@ -66,18 +66,4 @@ extern int setjmp(jmp_buf __jmpb);
/* Forced breakpoint */
#define breakpoint() __asm__ __volatile__("trapa #0x3c")
-/* Taken from sh-stub.c of GDB 4.18 */
-static const char hexchars[] = "0123456789abcdef";
-
-/* Get high hex bits */
-static inline char highhex(const int x)
-{
- return hexchars[(x >> 4) & 0xf];
-}
-
-/* Get low hex bits */
-static inline char lowhex(const int x)
-{
- return hexchars[x & 0xf];
-}
#endif
--
1.5.5.1.350.gbbbf
reply other threads:[~2008-05-02 19:04 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1209754914.26173.33.camel@brick \
--to=harvey.harrison@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox