From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757721AbYEMBwU (ORCPT ); Mon, 12 May 2008 21:52:20 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1756702AbYEMBwL (ORCPT ); Mon, 12 May 2008 21:52:11 -0400 Received: from pasmtpb.tele.dk ([80.160.77.98]:52575 "EHLO pasmtpB.tele.dk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756401AbYEMBwI (ORCPT ); Mon, 12 May 2008 21:52:08 -0400 Subject: Oops on -rc2-git1, possibly md_raid1 or xfs related. (Was: Re: Linux 2.6.26-rc2) From: Kasper Sandberg To: Linus Torvalds Cc: Linux Kernel Mailing List In-Reply-To: References: Content-Type: text/plain Date: Tue, 13 May 2008 03:49:18 +0200 Message-Id: <1210643358.1093.14.camel@localhost> Mime-Version: 1.0 X-Mailer: Evolution 2.4.0 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Just booted -rc2-git1, and got an oops(entier dmesg): Linux version 2.6.26-rc2-git1 (root@quadstation) (gcc version 4.3.0 (Gentoo 4.3.0 p1.1) ) #1 SMP PREEMPT Tue May 13 03:32:40 CEST 2008 Command line: root=/dev/md1 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable) BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS) BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data) BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) Entering add_active_range(0, 0, 158) 0 entries of 256 used Entering add_active_range(0, 256, 851680) 1 entries of 256 used Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used max_pfn_mapped = 1245184 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping DMI 2.4 present. ACPI: RSDP 000F6EB0, 0014 (r0 GBT ) ACPI: RSDT CFEE3040, 0034 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) ACPI: FACP CFEE30C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) ACPI: DSDT CFEE3180, 4C2E (r1 GBT GBTUACPI 1000 MSFT 100000C) ACPI: FACS CFEE0000, 0040 ACPI: HPET CFEE7F00, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98) ACPI: MCFG CFEE7F80, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) ACPI: APIC CFEE7E00, 0084 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) Entering add_active_range(0, 0, 158) 0 entries of 256 used Entering add_active_range(0, 256, 851680) 1 entries of 256 used Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] TRAMPOLINE early res: 2 [200000-64dfb3] TEXT DATA BSS early res: 3 [9e800-fffff] BIOS reserved early res: 4 [8000-dfff] PGTABLE [ffffe20000000000-ffffe200043fffff] PMD -> [ffff81000c200000-ffff8100105fffff] on node 0 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1245184 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0 -> 158 0: 256 -> 851680 0: 1048576 -> 1245184 On node 0 totalpages: 1048190 DMA zone: 56 pages used for memmap DMA zone: 1209 pages reserved DMA zone: 2733 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833304 pages, LIFO batch:31 Normal zone: 2688 pages used for memmap Normal zone: 193920 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at e6000000 (gap: e4000000:1ac00000) PERCPU: Allocating 33988 bytes of per cpu data NR_CPUS: 4, nr_cpu_ids: 4 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1029957 Kernel command line: root=/dev/md1 Initializing CPU#0 Preemptible RCU implementation. PID hash table entries: 4096 (order: 12, 32768 bytes) TSC calibrated against PM_TIMER time.c: Detected 3200.110 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x163f000 - 0x563f000 Memory: 4045556k/4980736k available (2759k kernel code, 146580k reserved, 976k data, 252k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 hpet clockevent registered Calibrating delay using timer specific routine.. 6403.45 BogoMIPS (lpj=3201728) Security Framework initialized Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Freeing SMP alternatives: 19k freed ACPI: Core revision 20080321 CPU0: Intel(R) Core(TM)2 Quad CPU Q9450 @ 2.66GHz stepping 07 Using local APIC timer interrupts. APIC timer calibration result 25000857 Detected 25.000 MHz APIC timer. Booting processor 1/3 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6400.07 BogoMIPS (lpj=3200038) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Quad CPU Q9450 @ 2.66GHz stepping 07 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2/1 ip 6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 6400.04 BogoMIPS (lpj=3200022) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU2: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 CPU2: Intel(R) Core(TM)2 Quad CPU Q9450 @ 2.66GHz stepping 07 checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3/2 ip 6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 6400.04 BogoMIPS (lpj=3200024) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU3: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 CPU3: Intel(R) Core(TM)2 Quad CPU Q9450 @ 2.66GHz stepping 07 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs Total of 4 processors activated (25603.62 BogoMIPS). net_namespace: 360 bytes NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - e3ffffff PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 64-bit timers, 14318180 Hz system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x290-0x29f has been reserved system 00:01: ioport range 0x800-0x87f has been reserved system 00:01: ioport range 0x290-0x294 has been reserved system 00:01: ioport range 0x880-0x88f has been reserved system 00:09: ioport range 0x400-0x4bf could not be reserved system 00:0a: iomem range 0xe0000000-0xe3ffffff could not be reserved system 00:0b: iomem range 0xd1e00-0xd3fff has been reserved system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved system 00:0b: iomem range 0xfc000-0xfffff could not be reserved system 00:0b: iomem range 0xcfee0000-0xcfefffff could not be reserved system 00:0b: iomem range 0x0-0x9ffff could not be reserved system 00:0b: iomem range 0x100000-0xcfedffff could not be reserved system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0b: iomem range 0xfed10000-0xfed1dfff could not be reserved system 00:0b: iomem range 0xfed20000-0xfed8ffff could not be reserved system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:0b: iomem range 0xffb00000-0xffb7ffff could not be reserved system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved system 00:0b: iomem range 0xe0000-0xeffff has been reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: 0xe4000000-0xe6ffffff PREFETCH window: 0x00000000d0000000-0x00000000dfffffff PCI: Bridge: 0000:00:06.0 IO window: a000-afff MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: b000-bfff MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: c000-cfff MEM window: 0xe7000000-0xe7ffffff PREFETCH window: 0x00000000e9000000-0x00000000e90fffff PCI: Bridge: 0000:00:1c.5 IO window: d000-dfff MEM window: 0xe8000000-0xe8ffffff PREFETCH window: 0x00000000e9100000-0x00000000e91fffff PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: 0xe9200000-0xe92fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:06.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.4 to 64 ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.5 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled msgmni has been set to 7902 for ipc namespace ffffffff8058c100 io scheduler noop registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:06.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] Allocate Port Service[0000:00:06.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] Allocate Port Service[0000:00:1c.4:pcie03] PCI: Setting latency timer of device 0000:00:1c.5 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.5:pcie00] Allocate Port Service[0000:00:1c.5:pcie02] Allocate Port Service[0000:00:1c.5:pcie03] hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.103 Driver 'sd' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 0 ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xe9306000 port 0xe9306100 irq 378 ata2: SATA max UDMA/133 abar m2048@0xe9306000 port 0xe9306180 irq 378 ata3: SATA max UDMA/133 abar m2048@0xe9306000 port 0xe9306200 irq 378 ata4: SATA max UDMA/133 abar m2048@0xe9306000 port 0xe9306280 irq 378 ata5: SATA max UDMA/133 abar m2048@0xe9306000 port 0xe9306300 irq 378 ata6: SATA max UDMA/133 abar m2048@0xe9306000 port 0xe9306380 irq 378 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-6: ST3500320NS, SN04, max UDMA/133 ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-6: ST3500320NS, SN04, max UDMA/133 ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata2.00: configured for UDMA/133 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA ST3500320NS SN04 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: Direct-Access ATA ST3500320NS SN04 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sd 1:0:0:0: [sdb] Attached SCSI disk USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.2 to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: raid1 personality registered for level 1 cpuidle: using governor ladder usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered NET: Registered protocol family 17 input: AT Translated Set 2 keyboard as /class/input/input0 md: Autodetecting RAID arrays. md: Scanned 6 and added 6 devices. md: autorun ... md: considering sdb3 ... md: adding sdb3 ... md: sdb2 has different UUID to sdb3 md: sdb1 has different UUID to sdb3 md: adding sda3 ... md: sda2 has different UUID to sdb3 md: sda1 has different UUID to sdb3 md: created md2 md: bind md: bind md: running: raid1: raid set md2 active with 2 out of 2 mirrors md: considering sdb2 ... md: adding sdb2 ... md: sdb1 has different UUID to sdb2 md: adding sda2 ... md: sda1 has different UUID to sdb2 md: created md1 md: bind md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind md: bind md: running: raid1: raid set md0 active with 2 out of 2 mirrors md: ... autorun DONE. Filesystem "md1": Disabling barriers, not supported by the underlying device XFS mounting filesystem md1 ------------[ cut here ]------------ WARNING: at include/linux/blkdev.h:443 blk_remove_plug+0x71/0xa0() Modules linked in: Pid: 460, comm: md1_raid1 Not tainted 2.6.26-rc2-git1 #1 Call Trace: [] warn_on_slowpath+0x64/0xc0 [] __next_cpu+0x19/0x30 [] find_busiest_group+0x22c/0x8d0 [] blk_remove_plug+0x71/0xa0 [] flush_pending_writes+0x3b/0x90 [] raid1d+0x4c/0xf60 [] hrtick_set+0x7b/0x160 [] thread_return+0x5e/0x57e [] schedule_timeout+0xad/0xf0 [] md_thread+0x47/0x120 [] autoremove_wake_function+0x0/0x30 [] md_thread+0x0/0x120 [] kthread+0x47/0x90 [] schedule_tail+0x27/0x60 [] child_rip+0xa/0x12 [] kthread+0x0/0x90 [] child_rip+0x0/0x12 ---[ end trace a97097b29774f236 ]--- Ending clean XFS mount for filesystem: md1 VFS: Mounted root (xfs filesystem) readonly. Freeing unused kernel memory: 252k freed Real Time Clock Driver v1.12ac ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe9305000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 6 ports detected input: Power Button (FF) as /class/input/input1 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input2 ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: ACPI0007:02 is registered as cooling_device2 ACPI: Processor [CPU2] (supports 8 throttling states) ACPI: ACPI0007:03 is registered as cooling_device3 ACPI: Processor [CPU3] (supports 8 throttling states) ACPI: Power Button (CM) [PWRB] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1b.0 to 64 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe9304000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 6 ports detected r8169 Gigabit Ethernet driver 2.2LK loaded ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:04:00.0 to 64 eth0: RTL8168c/8111c at 0xffffc20000078000, 00:1d:7d:06:7b:39, XID 3c2000c0 IRQ 377 r8169 Gigabit Ethernet driver 2.2LK loaded ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:05:00.0 to 64 eth1: RTL8168c/8111c at 0xffffc2000007a000, 00:1d:7d:06:75:d8, XID 3c2000c0 IRQ 376 ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 18 (level, low) -> IRQ 18 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[e9204000-e92047ff] Max Packet=[2048] IR/IT contexts=[4/8] Filesystem "md1": Disabling barriers, not supported by the underlying device fuse init (API version 7.9) input: ImPS/2 Logitech Wheel Mouse as /class/input/input3 ieee1394: Host added: ID:BUS[0-00:1023] GUID[000ee74800001d7d] r8169: eth0: link up r8169: eth0: link up it87: Found IT8718F chip at 0x290, revision 5 it87: in3 is VCC (+5V) coretemp coretemp.0: Using relative temperature scale! coretemp coretemp.1: Using relative temperature scale! coretemp coretemp.2: Using relative temperature scale! coretemp coretemp.3: Using relative temperature scale! The system appeared to work, for the few minutes i had it running, before i went back to .25. On Mon, 2008-05-12 at 07:55 -0700, Linus Torvalds wrote: