From: Peter Zijlstra <a.p.zijlstra@chello.nl>
To: Gregory Haskins <ghaskins@novell.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>,
mingo@elte.hu, dmitry.adamushko@gmail.com,
torvalds@linux-foundation.org, pj@sgi.com,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] cpu hotplug, sched:Introduce cpu_active_map and redoscheddomainmanagment (take 2)
Date: Tue, 22 Jul 2008 16:16:00 +0200 [thread overview]
Message-ID: <1216736160.7257.97.camel@twins> (raw)
In-Reply-To: <4885E952.8020708@novell.com>
On Tue, 2008-07-22 at 10:06 -0400, Gregory Haskins wrote:
> Max Krasnyansky wrote:
> > Greg, correct me if I'm wrong but we seem to have exact same issue with the
> > rq->rq->online map. Lets take "cpu going down" for example. We're clearing
> > rq->rd->online bit on DYING event, but nothing AFAICS prevents another cpu
> > calling rebuild_sched_domains()->partition_sched_domains() in the middle of
> > the hotplug sequence.
> > partition_sched_domains() will happily reset rd->rq->online mask and things
> > will fail. I'm talking about this path
> >
> > __build_sched_domains() -> cpu_attach_domain() -> rq_attach_root()
> > ...
> > cpu_set(rq->cpu, rd->span);
> > if (cpu_isset(rq->cpu, cpu_online_map))
> > set_rq_online(rq);
> > ...
> >
> >
>
> I think you are right, but wouldn't s/online/active above fix that as
> well? The active_map didnt exist at the time that code went in initially ;)
>
> > --
> >
> > btw Why didn't we convert sched*.c to use rq->rd->online when it was
> > introduced ? ie Instead of using cpu_online_map directly.
> >
> I think things were converted where they made sense to convert. But we
> also had a different goal at that time, so perhaps something was
> missed. If you think something else should be converted, please point
> it out.
>
> In the meantime, I would suggest we consider this patch on top of yours
> (applies to tip/sched/devel):
>
> ----------------------
>
> sched: Fully integrate cpus_active_map and root-domain code
>
> Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Right, makes sense.
ACK
> diff --git a/kernel/sched.c b/kernel/sched.c
> index 62b1b8e..99ba70d 100644
> --- a/kernel/sched.c
> +++ b/kernel/sched.c
> @@ -6611,7 +6611,7 @@ static void rq_attach_root(struct rq *rq, struct
> root_domain *rd)
> rq->rd = rd;
>
> cpu_set(rq->cpu, rd->span);
> - if (cpu_isset(rq->cpu, cpu_online_map))
> + if (cpu_isset(rq->cpu, cpu_active_map))
> set_rq_online(rq);
>
> spin_unlock_irqrestore(&rq->lock, flags);
> diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
> index 7f70026..2bae8de 100644
> --- a/kernel/sched_fair.c
> +++ b/kernel/sched_fair.c
> @@ -1004,7 +1004,7 @@ static void yield_task_fair(struct rq *rq)
> * search starts with cpus closest then further out as needed,
> * so we always favor a closer, idle cpu.
> * Domains may include CPUs that are not usable for migration,
> - * hence we need to mask them out (cpu_active_map)
> + * hence we need to mask them out (rq->rd->online)
> *
> * Returns the CPU we should wake onto.
> */
> @@ -1032,7 +1032,7 @@ static int wake_idle(int cpu, struct task_struct *p)
> || ((sd->flags & SD_WAKE_IDLE_FAR)
> && !task_hot(p, task_rq(p)->clock, sd))) {
> cpus_and(tmp, sd->span, p->cpus_allowed);
> - cpus_and(tmp, tmp, cpu_active_map);
> + cpus_and(tmp, tmp, task_rq(p)->rd->online);
> for_each_cpu_mask(i, tmp) {
> if (idle_cpu(i)) {
> if (i != task_cpu(p)) {
> diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
> index 24621ce..d93169d 100644
> --- a/kernel/sched_rt.c
> +++ b/kernel/sched_rt.c
> @@ -936,13 +936,6 @@ static int find_lowest_rq(struct task_struct *task)
> return -1; /* No targets found */
>
> /*
> - * Only consider CPUs that are usable for migration.
> - * I guess we might want to change cpupri_find() to ignore those
> - * in the first place.
> - */
> - cpus_and(*lowest_mask, *lowest_mask, cpu_active_map);
> -
> - /*
> * At this point we have built a mask of cpus representing the
> * lowest priority tasks in the system. Now we want to elect
> * the best one based on our affinity and topology.
>
> --------------
>
> Regards,
> -Greg
>
next prev parent reply other threads:[~2008-07-22 14:16 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-15 11:43 [PATCH] cpu hotplug, sched: Introduce cpu_active_map and redo sched domain managment (take 2) Max Krasnyansky
2008-07-15 11:49 ` Marcel Holtmann
2008-07-15 11:52 ` Peter Zijlstra
2008-07-15 11:57 ` Marcel Holtmann
2008-07-15 12:03 ` Peter Zijlstra
2008-07-15 15:24 ` Linus Torvalds
2008-07-15 12:45 ` Gregory Haskins
2008-07-15 15:22 ` Linus Torvalds
2008-07-16 8:57 ` Dmitry Adamushko
2008-07-16 20:29 ` Max Krasnyansky
2008-07-16 21:55 ` Dmitry Adamushko
2008-07-16 12:12 ` Gregory Haskins
2008-07-16 21:44 ` Max Krasnyansky
2008-07-17 2:51 ` [PATCH] cpu hotplug, sched: Introduce cpu_active_map and redosched " Gregory Haskins
2008-07-17 7:16 ` Max Krasnyansky
2008-07-17 11:57 ` [PATCH] cpu hotplug, sched: Introduce cpu_active_map and redoscheddomain " Gregory Haskins
2008-07-17 18:52 ` Max Krasnyansky
2008-07-17 19:46 ` [PATCH] cpu hotplug, sched: Introduce cpu_active_map and redoscheddomainmanagment " Gregory Haskins
2008-07-18 11:53 ` Peter Zijlstra
2008-07-18 12:22 ` [PATCH] cpu hotplug, sched:Introduce " Gregory Haskins
2008-07-22 5:10 ` Max Krasnyansky
2008-07-22 14:06 ` Gregory Haskins
2008-07-22 14:16 ` Peter Zijlstra [this message]
2008-07-22 14:17 ` Gregory Haskins
2008-07-22 14:26 ` Peter Zijlstra
2008-07-22 14:45 ` Gregory Haskins
2008-07-22 19:32 ` Max Krasnyansky
2008-08-11 13:11 ` Gregory Haskins
2008-08-11 21:57 ` Max Krasnyansky
2008-07-18 11:30 ` [PATCH] cpu hotplug, sched: Introduce cpu_active_map and redo sched domain managment " Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1216736160.7257.97.camel@twins \
--to=a.p.zijlstra@chello.nl \
--cc=dmitry.adamushko@gmail.com \
--cc=ghaskins@novell.com \
--cc=linux-kernel@vger.kernel.org \
--cc=maxk@qualcomm.com \
--cc=mingo@elte.hu \
--cc=pj@sgi.com \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox