From: Yinghai Lu <yhlu.kernel@gmail.com>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
hpa <hpa@zytor.com>, Eric Biederman <ebiederm@xmission.com>,
Dhaval Giani <dhaval@linux.vnet.ibm.com>,
Mike Travis <travis@sgi.com>,
Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, Yinghai Lu <yhlu.kernel@gmail.com>
Subject: [PATCH 16/16] x86: alloc dyn_array all alltogether
Date: Fri, 1 Aug 2008 02:37:44 -0700 [thread overview]
Message-ID: <1217583464-28494-17-git-send-email-yhlu.kernel@gmail.com> (raw)
In-Reply-To: <1217583464-28494-16-git-send-email-yhlu.kernel@gmail.com>
also tighten the alignment checking..., and make print out less
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
---
arch/x86/kernel/setup_percpu.c | 16 ++++++----
include/linux/init.h | 2 -
init/main.c | 65 +++++++++++++++++++++++++++++++----------
3 files changed, 62 insertions(+), 21 deletions(-)
Index: linux-2.6/arch/x86/kernel/setup_percpu.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/setup_percpu.c
+++ linux-2.6/arch/x86/kernel/setup_percpu.c
@@ -140,26 +140,31 @@ static void __init setup_cpu_pda_map(voi
*/
void __init setup_per_cpu_areas(void)
{
- ssize_t size, old_size;
+ ssize_t size, old_size, da_size;
char *ptr;
int cpu;
+ unsigned long align = 1;
/* Setup cpu_pda map */
setup_cpu_pda_map();
/* Copy section for each CPU (we discard the original) */
old_size = PERCPU_ENOUGH_ROOM;
- size = old_size + per_cpu_dyn_array_size();
+ da_size = per_cpu_dyn_array_size(&align);
+ align = max_t(unsigned long, PAGE_SIZE, align);
+ size = roundup(old_size + da_size, align);
printk(KERN_INFO "PERCPU: Allocating %zd bytes of per cpu data\n",
size);
for_each_possible_cpu(cpu) {
#ifndef CONFIG_NEED_MULTIPLE_NODES
- ptr = alloc_bootmem_pages(size);
+ ptr = __alloc_bootmem_nopanic(size, align,
+ __pa(MAX_DMA_ADDRESS));
#else
int node = early_cpu_to_node(cpu);
if (!node_online(node) || !NODE_DATA(node)) {
- ptr = alloc_bootmem_pages(size);
+ ptr = __alloc_bootmem_nopanic(size, align,
+ __pa(MAX_DMA_ADDRESS));
printk(KERN_INFO
"cpu %d has no node %d or node-local memory\n",
cpu, node);
@@ -168,7 +173,8 @@ void __init setup_per_cpu_areas(void)
cpu, __pa(ptr));
}
else {
- ptr = alloc_bootmem_pages_node(NODE_DATA(node), size);
+ ptr = __alloc_bootmem_node(NODE_DATA(node), size, align,
+ __pa(MAX_DMA_ADDRESS));
if (ptr)
printk(KERN_DEBUG "per cpu data for cpu%d on node%d at %016lx\n",
cpu, node, __pa(ptr));
Index: linux-2.6/include/linux/init.h
===================================================================
--- linux-2.6.orig/include/linux/init.h
+++ linux-2.6/include/linux/init.h
@@ -291,7 +291,7 @@ extern struct dyn_array *__per_cpu_dyn_a
DEFINE_PER_CPU_DYN_ARRAY_ADDR(nameX, nameX, nrX, alignX, init_workX)
extern void pre_alloc_dyn_array(void);
-extern unsigned long per_cpu_dyn_array_size(void);
+extern unsigned long per_cpu_dyn_array_size(unsigned long *align);
extern void per_cpu_alloc_dyn_array(int cpu, char *ptr);
#endif /* __ASSEMBLY__ */
Index: linux-2.6/init/main.c
===================================================================
--- linux-2.6.orig/init/main.c
+++ linux-2.6/init/main.c
@@ -397,10 +397,14 @@ static void __init setup_per_cpu_areas(v
unsigned long size, i, old_size;
char *ptr;
unsigned long nr_possible_cpus = num_possible_cpus();
+ unsigned long align = 1;
+ unsigned da_size;
/* Copy section for each CPU (we discard the original) */
old_size = PERCPU_ENOUGH_ROOM;
- size = ALIGN(old_size + per_cpu_dyn_array_size(), PAGE_SIZE);
+ da_size = per_cpu_dyn_array_size(&align);
+ align = max_t(unsigned long, PAGE_SIZE, align);
+ size = ALIGN(old_size + da_size, align);
ptr = alloc_bootmem_pages(size * nr_possible_cpus);
for_each_possible_cpu(i) {
@@ -544,45 +548,78 @@ void __init __weak thread_info_cache_ini
void pre_alloc_dyn_array(void)
{
#ifdef CONFIG_HAVE_DYN_ARRAY
- unsigned long size, phys = 0;
+ unsigned long total_size = 0, size, phys;
+ unsigned long max_align = 1;
struct dyn_array **daa;
+ char *ptr;
+ /* get the total size at first */
for (daa = __dyn_array_start ; daa < __dyn_array_end; daa++) {
struct dyn_array *da = *daa;
size = da->size * (*da->nr);
- print_fn_descriptor_symbol("dyna_array %s ", da->name);
- printk(KERN_CONT "size:%#lx nr:%d align:%#lx",
+ print_fn_descriptor_symbol("dyn_array %s ", da->name);
+ printk(KERN_CONT "size:%#lx nr:%d align:%#lx\n",
da->size, *da->nr, da->align);
- *da->name = __alloc_bootmem_nopanic(size, da->align, phys);
- phys = virt_to_phys(*da->name);
+ total_size += roundup(size, da->align);
+ if (da->align > max_align)
+ max_align = da->align;
+ }
+ if (total_size)
+ printk(KERN_DEBUG "dyn_array total_size: %#lx\n",
+ total_size);
+ else
+ return;
+
+ /* allocate them all together */
+ max_align = max_t(unsigned long, max_align, PAGE_SIZE);
+ ptr = __alloc_bootmem_nopanic(total_size, max_align, 0);
+ if (!ptr)
+ panic("Can not alloc dyn_alloc\n");
+
+ phys = virt_to_phys(ptr);
+ for (daa = __dyn_array_start ; daa < __dyn_array_end; daa++) {
+ struct dyn_array *da = *daa;
+
+ size = da->size * (*da->nr);
+ print_fn_descriptor_symbol("dyn_array %s ", da->name);
+
+ phys = roundup(phys, da->align);
+ *da->name = phys_to_virt(phys);
printk(KERN_CONT " ==> [%#lx - %#lx]\n", phys, phys + size);
+ phys += size;
+
if (da->init_work)
da->init_work(da);
}
#endif
}
-unsigned long per_cpu_dyn_array_size(void)
+unsigned long per_cpu_dyn_array_size(unsigned long *align)
{
unsigned long total_size = 0;
#ifdef CONFIG_HAVE_DYN_ARRAY
unsigned long size;
struct dyn_array **daa;
+ unsigned max_align = 1;
for (daa = __per_cpu_dyn_array_start ; daa < __per_cpu_dyn_array_end; daa++) {
struct dyn_array *da = *daa;
size = da->size * (*da->nr);
- print_fn_descriptor_symbol("per_cpu_dyna_array %s ", da->name);
+ print_fn_descriptor_symbol("per_cpu_dyn_array %s ", da->name);
printk(KERN_CONT "size:%#lx nr:%d align:%#lx\n",
da->size, *da->nr, da->align);
total_size += roundup(size, da->align);
+ if (da->align > max_align)
+ max_align = da->align;
}
- if (total_size)
- printk(KERN_DEBUG "per_cpu_dyna_array total_size: %#lx\n",
+ if (total_size) {
+ printk(KERN_DEBUG "per_cpu_dyn_array total_size: %#lx\n",
total_size);
+ *align = max_align;
+ }
#endif
return total_size;
}
@@ -596,14 +633,11 @@ void per_cpu_alloc_dyn_array(int cpu, ch
void **array;
phys = virt_to_phys(ptr);
-
for (daa = __per_cpu_dyn_array_start ; daa < __per_cpu_dyn_array_end; daa++) {
struct dyn_array *da = *daa;
size = da->size * (*da->nr);
- print_fn_descriptor_symbol("per_cpu_dyna_array %s ", da->name);
- printk(KERN_CONT "size:%#lx nr:%d align:%#lx",
- da->size, *da->nr, da->align);
+ print_fn_descriptor_symbol("per_cpu_dyn_array %s ", da->name);
phys = roundup(phys, da->align);
addr = (unsigned long)da->name;
@@ -611,7 +645,8 @@ void per_cpu_alloc_dyn_array(int cpu, ch
array = (void **)addr;
*array = phys_to_virt(phys);
*da->name = *array; /* so init_work could use it directly */
- printk(KERN_CONT " %p ==> [%#lx - %#lx]\n", array, phys, phys + size);
+ printk(KERN_CONT " ==> [%#lx - %#lx]\n", phys, phys + size);
+
phys += size;
if (da->init_work) {
next prev parent reply other threads:[~2008-08-01 9:43 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-01 9:37 [PATCH 00/16] dyn_array and nr_irqs support v2 Yinghai Lu
2008-08-01 9:37 ` [PATCH 01/16] x86: 64bit support more than 256 irq Yinghai Lu
2008-08-01 9:37 ` [PATCH 02/16] x86: introduce nr_irqs for 64bit v3 Yinghai Lu
2008-08-01 9:37 ` [PATCH 03/16] add dyn_array support Yinghai Lu
2008-08-01 9:37 ` [PATCH 04/16] make irq_timer_state to use dyn_array Yinghai Lu
2008-08-01 9:37 ` [PATCH 05/16] make irq2_iommu " Yinghai Lu
2008-08-01 9:37 ` [PATCH 06/16] make irq_desc " Yinghai Lu
2008-08-01 9:37 ` [PATCH 07/16] x86: make 64bit support dyn_array Yinghai Lu
2008-08-01 9:37 ` [PATCH 08/16] serial: change remove NR_IRQS in 8250.c v2 Yinghai Lu
2008-08-01 9:37 ` [PATCH 09/16] add per_cpu_dyn_array support Yinghai Lu
2008-08-01 9:37 ` [PATCH 10/16] irq: make irqs in kernel stat use per_cpu_dyn_array Yinghai Lu
2008-08-01 9:37 ` [PATCH 11/16] x86 remove irq_vectors_limit.h Yinghai Lu
2008-08-01 9:37 ` [PATCH 12/16] x86: make 32bit use dyn_array Yinghai Lu
2008-08-01 9:37 ` [PATCH 13/16] add per_cpu_dyn_array for arch percpu support Yinghai Lu
2008-08-01 9:37 ` [PATCH 14/16] x86: get mp_irqs from madt Yinghai Lu
2008-08-01 9:37 ` [PATCH 15/16] x86: make 32bit more like with io_apic/dyn_array to 64 bit Yinghai Lu
2008-08-01 9:37 ` Yinghai Lu [this message]
2008-08-01 20:46 ` [PATCH 00/16] dyn_array and nr_irqs support v2 Eric W. Biederman
2008-08-01 21:30 ` Yinghai Lu
2008-08-01 21:57 ` Yinghai Lu
2008-08-01 22:45 ` Eric W. Biederman
2008-08-01 22:10 ` Yinghai Lu
2008-08-01 22:38 ` Eric W. Biederman
2008-08-02 1:09 ` Yinghai Lu
2008-08-02 1:36 ` H. Peter Anvin
2008-08-02 1:41 ` Eric W. Biederman
2008-08-02 2:01 ` Yinghai Lu
2008-08-02 2:03 ` H. Peter Anvin
2008-08-02 2:39 ` Eric W. Biederman
2008-08-02 3:28 ` H. Peter Anvin
2008-08-02 4:42 ` Eric W. Biederman
2008-08-02 15:41 ` H. Peter Anvin
2008-08-02 20:20 ` Eric W. Biederman
2008-08-04 12:57 ` Mike Travis
2008-08-05 2:38 ` H. Peter Anvin
2008-08-05 3:40 ` Eric W. Biederman
2008-08-05 3:48 ` H. Peter Anvin
2008-08-01 21:47 ` Mike Travis
2008-08-02 2:58 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1217583464-28494-17-git-send-email-yhlu.kernel@gmail.com \
--to=yhlu.kernel@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=dhaval@linux.vnet.ibm.com \
--cc=ebiederm@xmission.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
--cc=travis@sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox