From: Yinghai Lu <yhlu.kernel@gmail.com>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
"Eric W. Biederman" <ebiederm@xmission.com>,
Dhaval Giani <dhaval@linux.vnet.ibm.com>,
Mike Travis <travis@sgi.com>,
Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, Yinghai Lu <yhlu.kernel@gmail.com>
Subject: [PATCH 15/25] drivers/serial to use nr_irqs
Date: Sat, 2 Aug 2008 19:59:15 -0700 [thread overview]
Message-ID: <1217732365-16595-16-git-send-email-yhlu.kernel@gmail.com> (raw)
In-Reply-To: <1217732365-16595-15-git-send-email-yhlu.kernel@gmail.com>
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
---
drivers/serial/8250.c | 4 ++--
drivers/serial/amba-pl010.c | 2 +-
drivers/serial/amba-pl011.c | 2 +-
drivers/serial/cpm_uart/cpm_uart_core.c | 2 +-
drivers/serial/m32r_sio.c | 4 ++--
drivers/serial/serial_core.c | 2 +-
drivers/serial/serial_lh7a40x.c | 2 +-
drivers/serial/sh-sci.c | 2 +-
drivers/serial/ucc_uart.c | 2 +-
9 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 3a4d677..3920324 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2433,7 +2433,7 @@ static void serial8250_config_port(struct uart_port *port, int flags)
static int
serial8250_verify_port(struct uart_port *port, struct serial_struct *ser)
{
- if (ser->irq >= NR_IRQS || ser->irq < 0 ||
+ if (ser->irq >= nr_irqs || ser->irq < 0 ||
ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS ||
ser->type == PORT_STARTECH)
@@ -2964,7 +2964,7 @@ static int __init serial8250_init(void)
"%d ports, IRQ sharing %sabled\n", nr_uarts,
share_irqs ? "en" : "dis");
- for (i = 0; i < NR_IRQS; i++)
+ for (i = 0; i < nr_irqs; i++)
spin_lock_init(&irq_lists[i].lock);
ret = uart_register_driver(&serial8250_reg);
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 90b56c2..7156268 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -512,7 +512,7 @@ static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser)
int ret = 0;
if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA)
ret = -EINVAL;
- if (ser->irq < 0 || ser->irq >= NR_IRQS)
+ if (ser->irq < 0 || ser->irq >= nr_irqs)
ret = -EINVAL;
if (ser->baud_base < 9600)
ret = -EINVAL;
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 9d08f27..b718004 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -572,7 +572,7 @@ static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser)
int ret = 0;
if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA)
ret = -EINVAL;
- if (ser->irq < 0 || ser->irq >= NR_IRQS)
+ if (ser->irq < 0 || ser->irq >= nr_irqs)
ret = -EINVAL;
if (ser->baud_base < 9600)
ret = -EINVAL;
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index a4f8692..b09fdc2 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -589,7 +589,7 @@ static int cpm_uart_verify_port(struct uart_port *port,
if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM)
ret = -EINVAL;
- if (ser->irq < 0 || ser->irq >= NR_IRQS)
+ if (ser->irq < 0 || ser->irq >= nr_irqs)
ret = -EINVAL;
if (ser->baud_base < 9600)
ret = -EINVAL;
diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
index 23d0305..611c97a 100644
--- a/drivers/serial/m32r_sio.c
+++ b/drivers/serial/m32r_sio.c
@@ -922,7 +922,7 @@ static void m32r_sio_config_port(struct uart_port *port, int flags)
static int
m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser)
{
- if (ser->irq >= NR_IRQS || ser->irq < 0 ||
+ if (ser->irq >= nr_irqs || ser->irq < 0 ||
ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
ser->type >= ARRAY_SIZE(uart_config))
return -EINVAL;
@@ -1162,7 +1162,7 @@ static int __init m32r_sio_init(void)
printk(KERN_INFO "Serial: M32R SIO driver\n");
- for (i = 0; i < NR_IRQS; i++)
+ for (i = 0; i < nr_irqs; i++)
spin_lock_init(&irq_lists[i].lock);
ret = uart_register_driver(&m32r_sio_reg);
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index f977c98..effd0bd 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -741,7 +741,7 @@ static int uart_set_info(struct uart_state *state,
if (port->ops->verify_port)
retval = port->ops->verify_port(port, &new_serial);
- if ((new_serial.irq >= NR_IRQS) || (new_serial.irq < 0) ||
+ if ((new_serial.irq >= nr_irqs) || (new_serial.irq < 0) ||
(new_serial.baud_base < 9600))
retval = -EINVAL;
diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c
index cb49a5a..61dc8b3 100644
--- a/drivers/serial/serial_lh7a40x.c
+++ b/drivers/serial/serial_lh7a40x.c
@@ -460,7 +460,7 @@ static int lh7a40xuart_verify_port (struct uart_port* port,
if (ser->type != PORT_UNKNOWN && ser->type != PORT_LH7A40X)
ret = -EINVAL;
- if (ser->irq < 0 || ser->irq >= NR_IRQS)
+ if (ser->irq < 0 || ser->irq >= nr_irqs)
ret = -EINVAL;
if (ser->baud_base < 9600) /* *** FIXME: is this true? */
ret = -EINVAL;
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 3df2aae..667b4b8 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -1157,7 +1157,7 @@ static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
{
struct sci_port *s = &sci_ports[port->line];
- if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > NR_IRQS)
+ if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs)
return -EINVAL;
if (ser->baud_base < 2400)
/* No paper tape reader for Mitch.. */
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index 5c5d18d..503f0b9 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -1066,7 +1066,7 @@ static int qe_uart_verify_port(struct uart_port *port,
if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM)
return -EINVAL;
- if (ser->irq < 0 || ser->irq >= NR_IRQS)
+ if (ser->irq < 0 || ser->irq >= nr_irqs)
return -EINVAL;
if (ser->baud_base < 9600)
--
1.5.4.5
next prev parent reply other threads:[~2008-08-03 3:05 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-03 2:59 [PATCH 00/25] dyn_array and nr_irqs support v3 Yinghai Lu
2008-08-03 2:59 ` [PATCH 01/25] x86: 64bit support more than 256 irq v2 Yinghai Lu
2008-08-03 2:59 ` [PATCH 02/25] x86: remove irq_vectors_limits Yinghai Lu
2008-08-03 2:59 ` [PATCH 03/25] add dyn_array support Yinghai Lu
2008-08-03 2:59 ` [PATCH 04/25] add per_cpu_dyn_array support Yinghai Lu
2008-08-03 2:59 ` [PATCH 05/25] x86: alloc dyn_array all alltogether Yinghai Lu
2008-08-03 2:59 ` [PATCH 06/25] x86: enable dyn_array support Yinghai Lu
2008-08-03 2:59 ` [PATCH 07/25] introduce nr_irqs Yinghai Lu
2008-08-03 2:59 ` [PATCH 08/25] x86: using nr_irqs Yinghai Lu
2008-08-03 2:59 ` [PATCH 09/25] drivers/char to use nr_irqs Yinghai Lu
2008-08-03 2:59 ` [PATCH 10/25] drivers/net " Yinghai Lu
2008-08-03 2:59 ` [PATCH 11/25] drivers intr remapping " Yinghai Lu
2008-08-03 2:59 ` [PATCH 12/25] drivers/pcmcia " Yinghai Lu
2008-08-03 2:59 ` [PATCH 13/25] drivers/rtc " Yinghai Lu
2008-08-03 2:59 ` [PATCH 14/25] drivers/scsi " Yinghai Lu
2008-08-03 2:59 ` Yinghai Lu [this message]
2008-08-03 2:59 ` [PATCH 16/25] drivers proc " Yinghai Lu
2008-08-03 2:59 ` [PATCH 17/25] drivers xen events " Yinghai Lu
2008-08-03 2:59 ` [PATCH 18/25] make irq_timer_state to use dyn_array Yinghai Lu
2008-08-03 2:59 ` [PATCH 19/25] make irq2_iommu " Yinghai Lu
2008-08-03 2:59 ` [PATCH 20/25] make irq_desc " Yinghai Lu
2008-08-03 2:59 ` [PATCH 21/25] serial: change remove NR_IRQS in 8250.c v2 Yinghai Lu
2008-08-03 2:59 ` [PATCH 22/25] irq: make irqs in kernel stat use per_cpu_dyn_array Yinghai Lu
2008-08-03 2:59 ` [PATCH 23/25] x86: use dyn_array in io_apic_xx.c Yinghai Lu
2008-08-03 2:59 ` [PATCH 24/25] x86: get mp_irqs from madt Yinghai Lu
2008-08-03 2:59 ` [PATCH 25/25] x86: remove nr_irq_vectors Yinghai Lu
2008-08-03 13:03 ` [PATCH 21/25] serial: change remove NR_IRQS in 8250.c v2 Alan Cox
2008-08-03 15:14 ` Alan Cox
2008-08-03 19:57 ` Eric W. Biederman
2008-08-04 14:17 ` Alan Cox
2008-08-04 18:13 ` Yinghai Lu
2008-08-04 18:51 ` Eric W. Biederman
2008-08-06 13:09 ` [PATCH] serial: Remove NR_IRQS usage Alan Cox
2008-08-06 16:10 ` Eric W. Biederman
2008-08-03 13:02 ` [PATCH 15/25] drivers/serial to use nr_irqs Alan Cox
2008-08-03 17:43 ` Yinghai Lu
2008-08-03 4:16 ` [PATCH 05/25] x86: alloc dyn_array all alltogether Johannes Weiner
2008-08-03 4:03 ` [PATCH 03/25] add dyn_array support Johannes Weiner
2008-08-03 4:21 ` Yinghai Lu
2008-08-03 4:55 ` Johannes Weiner
2008-08-03 5:04 ` Yinghai Lu
2008-08-03 5:31 ` Johannes Weiner
2008-08-03 5:39 ` Yinghai Lu
2008-08-03 5:40 ` Yinghai Lu
2008-08-03 5:47 ` Johannes Weiner
2008-08-03 5:48 ` Yinghai Lu
2008-08-03 5:51 ` [PATCH 00/25] dyn_array and nr_irqs support v3 Eric W. Biederman
2008-08-03 6:04 ` Yinghai Lu
2008-08-03 6:39 ` Eric W. Biederman
2008-08-03 8:25 ` Yinghai Lu
2008-08-03 9:15 ` Eric W. Biederman
2008-08-03 17:54 ` Yinghai Lu
2008-08-03 19:20 ` Yinghai Lu
2008-08-04 1:59 ` Yinghai Lu
2008-08-04 14:31 ` Mike Travis
2008-08-05 23:01 ` H. Peter Anvin
2008-08-05 23:15 ` Yinghai Lu
2008-08-05 23:26 ` H. Peter Anvin
2008-08-05 23:53 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1217732365-16595-16-git-send-email-yhlu.kernel@gmail.com \
--to=yhlu.kernel@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=dhaval@linux.vnet.ibm.com \
--cc=ebiederm@xmission.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
--cc=travis@sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox