From: Yinghai Lu <yhlu.kernel@gmail.com>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
"Eric W. Biederman" <ebiederm@xmission.com>,
Dhaval Giani <dhaval@linux.vnet.ibm.com>,
Mike Travis <travis@sgi.com>,
Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, Yinghai Lu <yhlu.kernel@gmail.com>
Subject: [PATCH 05/25] x86: alloc dyn_array all alltogether
Date: Sat, 2 Aug 2008 19:59:05 -0700 [thread overview]
Message-ID: <1217732365-16595-6-git-send-email-yhlu.kernel@gmail.com> (raw)
In-Reply-To: <1217732365-16595-5-git-send-email-yhlu.kernel@gmail.com>
so could spare some memory with small alignment in bootmem
also tighten the alignment checking..., and make print out less debug info
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
---
arch/x86/kernel/setup_percpu.c | 16 +++++++---
include/linux/init.h | 2 +-
init/main.c | 65 ++++++++++++++++++++++++++++++---------
3 files changed, 62 insertions(+), 21 deletions(-)
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 13ba7a8..4702c12 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -140,26 +140,31 @@ static void __init setup_cpu_pda_map(void)
*/
void __init setup_per_cpu_areas(void)
{
- ssize_t size, old_size;
+ ssize_t size, old_size, da_size;
char *ptr;
int cpu;
+ unsigned long align = 1;
/* Setup cpu_pda map */
setup_cpu_pda_map();
/* Copy section for each CPU (we discard the original) */
old_size = PERCPU_ENOUGH_ROOM;
- size = old_size + per_cpu_dyn_array_size();
+ da_size = per_cpu_dyn_array_size(&align);
+ align = max_t(unsigned long, PAGE_SIZE, align);
+ size = roundup(old_size + da_size, align);
printk(KERN_INFO "PERCPU: Allocating %zd bytes of per cpu data\n",
size);
for_each_possible_cpu(cpu) {
#ifndef CONFIG_NEED_MULTIPLE_NODES
- ptr = alloc_bootmem_pages(size);
+ ptr = __alloc_bootmem_nopanic(size, align,
+ __pa(MAX_DMA_ADDRESS));
#else
int node = early_cpu_to_node(cpu);
if (!node_online(node) || !NODE_DATA(node)) {
- ptr = alloc_bootmem_pages(size);
+ ptr = __alloc_bootmem_nopanic(size, align,
+ __pa(MAX_DMA_ADDRESS));
printk(KERN_INFO
"cpu %d has no node %d or node-local memory\n",
cpu, node);
@@ -168,7 +173,8 @@ void __init setup_per_cpu_areas(void)
cpu, __pa(ptr));
}
else {
- ptr = alloc_bootmem_pages_node(NODE_DATA(node), size);
+ ptr = __alloc_bootmem_node(NODE_DATA(node), size, align,
+ __pa(MAX_DMA_ADDRESS));
if (ptr)
printk(KERN_DEBUG "per cpu data for cpu%d on node%d at %016lx\n",
cpu, node, __pa(ptr));
diff --git a/include/linux/init.h b/include/linux/init.h
index 9fbe61b..2e42af8 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -291,7 +291,7 @@ extern struct dyn_array *__per_cpu_dyn_array_start[], *__per_cpu_dyn_array_end[]
DEFINE_PER_CPU_DYN_ARRAY_ADDR(nameX, nameX, nrX, alignX, init_workX)
extern void pre_alloc_dyn_array(void);
-extern unsigned long per_cpu_dyn_array_size(void);
+extern unsigned long per_cpu_dyn_array_size(unsigned long *align);
extern void per_cpu_alloc_dyn_array(int cpu, char *ptr);
#endif /* __ASSEMBLY__ */
diff --git a/init/main.c b/init/main.c
index a600562..3454b4a 100644
--- a/init/main.c
+++ b/init/main.c
@@ -397,10 +397,14 @@ static void __init setup_per_cpu_areas(void)
unsigned long size, i, old_size;
char *ptr;
unsigned long nr_possible_cpus = num_possible_cpus();
+ unsigned long align = 1;
+ unsigned da_size;
/* Copy section for each CPU (we discard the original) */
old_size = PERCPU_ENOUGH_ROOM;
- size = ALIGN(old_size + per_cpu_dyn_array_size(), PAGE_SIZE);
+ da_size = per_cpu_dyn_array_size(&align);
+ align = max_t(unsigned long, PAGE_SIZE, align);
+ size = ALIGN(old_size + da_size, align);
ptr = alloc_bootmem_pages(size * nr_possible_cpus);
for_each_possible_cpu(i) {
@@ -544,45 +548,78 @@ void __init __weak thread_info_cache_init(void)
void pre_alloc_dyn_array(void)
{
#ifdef CONFIG_HAVE_DYN_ARRAY
- unsigned long size, phys = 0;
+ unsigned long total_size = 0, size, phys;
+ unsigned long max_align = 1;
struct dyn_array **daa;
+ char *ptr;
+ /* get the total size at first */
for (daa = __dyn_array_start ; daa < __dyn_array_end; daa++) {
struct dyn_array *da = *daa;
size = da->size * (*da->nr);
- print_fn_descriptor_symbol("dyna_array %s ", da->name);
- printk(KERN_CONT "size:%#lx nr:%d align:%#lx",
+ print_fn_descriptor_symbol("dyn_array %s ", da->name);
+ printk(KERN_CONT "size:%#lx nr:%d align:%#lx\n",
da->size, *da->nr, da->align);
- *da->name = __alloc_bootmem_nopanic(size, da->align, phys);
- phys = virt_to_phys(*da->name);
+ total_size += roundup(size, da->align);
+ if (da->align > max_align)
+ max_align = da->align;
+ }
+ if (total_size)
+ printk(KERN_DEBUG "dyn_array total_size: %#lx\n",
+ total_size);
+ else
+ return;
+
+ /* allocate them all together */
+ max_align = max_t(unsigned long, max_align, PAGE_SIZE);
+ ptr = __alloc_bootmem_nopanic(total_size, max_align, 0);
+ if (!ptr)
+ panic("Can not alloc dyn_alloc\n");
+
+ phys = virt_to_phys(ptr);
+ for (daa = __dyn_array_start ; daa < __dyn_array_end; daa++) {
+ struct dyn_array *da = *daa;
+
+ size = da->size * (*da->nr);
+ print_fn_descriptor_symbol("dyn_array %s ", da->name);
+
+ phys = roundup(phys, da->align);
+ *da->name = phys_to_virt(phys);
printk(KERN_CONT " ==> [%#lx - %#lx]\n", phys, phys + size);
+ phys += size;
+
if (da->init_work)
da->init_work(da);
}
#endif
}
-unsigned long per_cpu_dyn_array_size(void)
+unsigned long per_cpu_dyn_array_size(unsigned long *align)
{
unsigned long total_size = 0;
#ifdef CONFIG_HAVE_DYN_ARRAY
unsigned long size;
struct dyn_array **daa;
+ unsigned max_align = 1;
for (daa = __per_cpu_dyn_array_start ; daa < __per_cpu_dyn_array_end; daa++) {
struct dyn_array *da = *daa;
size = da->size * (*da->nr);
- print_fn_descriptor_symbol("per_cpu_dyna_array %s ", da->name);
+ print_fn_descriptor_symbol("per_cpu_dyn_array %s ", da->name);
printk(KERN_CONT "size:%#lx nr:%d align:%#lx\n",
da->size, *da->nr, da->align);
total_size += roundup(size, da->align);
+ if (da->align > max_align)
+ max_align = da->align;
}
- if (total_size)
- printk(KERN_DEBUG "per_cpu_dyna_array total_size: %#lx\n",
+ if (total_size) {
+ printk(KERN_DEBUG "per_cpu_dyn_array total_size: %#lx\n",
total_size);
+ *align = max_align;
+ }
#endif
return total_size;
}
@@ -596,14 +633,11 @@ void per_cpu_alloc_dyn_array(int cpu, char *ptr)
void **array;
phys = virt_to_phys(ptr);
-
for (daa = __per_cpu_dyn_array_start ; daa < __per_cpu_dyn_array_end; daa++) {
struct dyn_array *da = *daa;
size = da->size * (*da->nr);
- print_fn_descriptor_symbol("per_cpu_dyna_array %s ", da->name);
- printk(KERN_CONT "size:%#lx nr:%d align:%#lx",
- da->size, *da->nr, da->align);
+ print_fn_descriptor_symbol("per_cpu_dyn_array %s ", da->name);
phys = roundup(phys, da->align);
addr = (unsigned long)da->name;
@@ -611,7 +645,8 @@ void per_cpu_alloc_dyn_array(int cpu, char *ptr)
array = (void **)addr;
*array = phys_to_virt(phys);
*da->name = *array; /* so init_work could use it directly */
- printk(KERN_CONT " %p ==> [%#lx - %#lx]\n", array, phys, phys + size);
+ printk(KERN_CONT " ==> [%#lx - %#lx]\n", phys, phys + size);
+
phys += size;
if (da->init_work) {
--
1.5.4.5
next prev parent reply other threads:[~2008-08-03 3:02 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-03 2:59 [PATCH 00/25] dyn_array and nr_irqs support v3 Yinghai Lu
2008-08-03 2:59 ` [PATCH 01/25] x86: 64bit support more than 256 irq v2 Yinghai Lu
2008-08-03 2:59 ` [PATCH 02/25] x86: remove irq_vectors_limits Yinghai Lu
2008-08-03 2:59 ` [PATCH 03/25] add dyn_array support Yinghai Lu
2008-08-03 2:59 ` [PATCH 04/25] add per_cpu_dyn_array support Yinghai Lu
2008-08-03 2:59 ` Yinghai Lu [this message]
2008-08-03 2:59 ` [PATCH 06/25] x86: enable dyn_array support Yinghai Lu
2008-08-03 2:59 ` [PATCH 07/25] introduce nr_irqs Yinghai Lu
2008-08-03 2:59 ` [PATCH 08/25] x86: using nr_irqs Yinghai Lu
2008-08-03 2:59 ` [PATCH 09/25] drivers/char to use nr_irqs Yinghai Lu
2008-08-03 2:59 ` [PATCH 10/25] drivers/net " Yinghai Lu
2008-08-03 2:59 ` [PATCH 11/25] drivers intr remapping " Yinghai Lu
2008-08-03 2:59 ` [PATCH 12/25] drivers/pcmcia " Yinghai Lu
2008-08-03 2:59 ` [PATCH 13/25] drivers/rtc " Yinghai Lu
2008-08-03 2:59 ` [PATCH 14/25] drivers/scsi " Yinghai Lu
2008-08-03 2:59 ` [PATCH 15/25] drivers/serial " Yinghai Lu
2008-08-03 2:59 ` [PATCH 16/25] drivers proc " Yinghai Lu
2008-08-03 2:59 ` [PATCH 17/25] drivers xen events " Yinghai Lu
2008-08-03 2:59 ` [PATCH 18/25] make irq_timer_state to use dyn_array Yinghai Lu
2008-08-03 2:59 ` [PATCH 19/25] make irq2_iommu " Yinghai Lu
2008-08-03 2:59 ` [PATCH 20/25] make irq_desc " Yinghai Lu
2008-08-03 2:59 ` [PATCH 21/25] serial: change remove NR_IRQS in 8250.c v2 Yinghai Lu
2008-08-03 2:59 ` [PATCH 22/25] irq: make irqs in kernel stat use per_cpu_dyn_array Yinghai Lu
2008-08-03 2:59 ` [PATCH 23/25] x86: use dyn_array in io_apic_xx.c Yinghai Lu
2008-08-03 2:59 ` [PATCH 24/25] x86: get mp_irqs from madt Yinghai Lu
2008-08-03 2:59 ` [PATCH 25/25] x86: remove nr_irq_vectors Yinghai Lu
2008-08-03 13:03 ` [PATCH 21/25] serial: change remove NR_IRQS in 8250.c v2 Alan Cox
2008-08-03 15:14 ` Alan Cox
2008-08-03 19:57 ` Eric W. Biederman
2008-08-04 14:17 ` Alan Cox
2008-08-04 18:13 ` Yinghai Lu
2008-08-04 18:51 ` Eric W. Biederman
2008-08-06 13:09 ` [PATCH] serial: Remove NR_IRQS usage Alan Cox
2008-08-06 16:10 ` Eric W. Biederman
2008-08-03 13:02 ` [PATCH 15/25] drivers/serial to use nr_irqs Alan Cox
2008-08-03 17:43 ` Yinghai Lu
2008-08-03 4:16 ` [PATCH 05/25] x86: alloc dyn_array all alltogether Johannes Weiner
2008-08-03 4:03 ` [PATCH 03/25] add dyn_array support Johannes Weiner
2008-08-03 4:21 ` Yinghai Lu
2008-08-03 4:55 ` Johannes Weiner
2008-08-03 5:04 ` Yinghai Lu
2008-08-03 5:31 ` Johannes Weiner
2008-08-03 5:39 ` Yinghai Lu
2008-08-03 5:40 ` Yinghai Lu
2008-08-03 5:47 ` Johannes Weiner
2008-08-03 5:48 ` Yinghai Lu
2008-08-03 5:51 ` [PATCH 00/25] dyn_array and nr_irqs support v3 Eric W. Biederman
2008-08-03 6:04 ` Yinghai Lu
2008-08-03 6:39 ` Eric W. Biederman
2008-08-03 8:25 ` Yinghai Lu
2008-08-03 9:15 ` Eric W. Biederman
2008-08-03 17:54 ` Yinghai Lu
2008-08-03 19:20 ` Yinghai Lu
2008-08-04 1:59 ` Yinghai Lu
2008-08-04 14:31 ` Mike Travis
2008-08-05 23:01 ` H. Peter Anvin
2008-08-05 23:15 ` Yinghai Lu
2008-08-05 23:26 ` H. Peter Anvin
2008-08-05 23:53 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1217732365-16595-6-git-send-email-yhlu.kernel@gmail.com \
--to=yhlu.kernel@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=dhaval@linux.vnet.ibm.com \
--cc=ebiederm@xmission.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
--cc=travis@sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox