From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S268300AbUHQPL0 (ORCPT ); Tue, 17 Aug 2004 11:11:26 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S268296AbUHQPLY (ORCPT ); Tue, 17 Aug 2004 11:11:24 -0400 Received: from mo1.b-one.net ([195.47.247.27]:33683 "EHLO smtp1.b-one.net") by vger.kernel.org with ESMTP id S268284AbUHQPIS (ORCPT ); Tue, 17 Aug 2004 11:08:18 -0400 Message-ID: <1218.80.62.167.105.1092755294.squirrel@80.62.167.105> Date: Tue, 17 Aug 2004 17:08:14 +0200 (CEST) Subject: From: morten@team60.dk To: Hi@nowhere.in.space, "Please CC to morten at team60 dot" , "as I'm not substribed.]"@/etc/mailname Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org I have a 120GB Seagate SATA HDD on a nForce2 motherboard with the siI 3512A SATA controller. I use the sata_sil driver. Please ask for more" , ") A few days ago I installed Debian Sarge 3.1RC1 with the new Debian installer. FYI it has a 2.4.26 kernel. I proceeded to download the new 2.6.8.1 kernel from" , "configuring and compiling it. Everything seemed to go smooth. Then I wanted to install modconf and ran apt-get install modconf. It fetched the package from the Internet as it was supposed" , "but when it was about to unpack the" , "command 0x35" , "ERROR on" , id@nowhere.in.space, lun@nowhere.in.space, "I/O" , "dev" , "abnormal status 0x58 on port 0xE181B087 I" , "repeated - same result. I also tried the precompiled binaries of 2.6.7 from the Debian" , "but that too yielded the same result. I also tried that it froze during boot a few" , "when initializing all the daemons. In between I used the 2.4.26 kernel that came with" , "and it worked perfectly fine. I also have Windows 2000 on dual" , "and there's no problems there" , "so I don't think it's a hardware problem. I heard that there has been a lot of work on SATA in 2.6.7 and" <2.6.8@nowhere.in.space>, "so could this be a bug? Thanks in" , linux-kernel@vger.kernel.org User-Agent: SquirrelMail/1.4.3a X-Mailer: SquirrelMail/1.4.3a MIME-Version: 1.0 Content-Type: text/plain;charset=iso-8859-1 Content-Transfer-Encoding: 8bit Hi, [Note: Please CC to morten at team60 dot dk, as I'm not substribed.] I have a 120GB Seagate SATA HDD on a nForce2 motherboard with the siI 3512A SATA controller. I use the sata_sil driver. Please ask for more specs, if you need them. :) A few days ago I installed Debian Sarge 3.1RC1 with the new Debian installer. FYI it has a 2.4.26 kernel. I proceeded to download the new 2.6.8.1 kernel from kernel.org, configuring and compiling it. Everything seemed to go smooth. Then I wanted to install modconf and ran apt-get install modconf. It fetched the package from the Internet as it was supposed to, but when it was about to unpack the package, linux froze and I got an error similar to the one below. ata1: command 0x35 timeout, stat 0x58 host_stat 0x1 scsi: ERROR on channel 0, id 0, lun 0, CDB: 0x2a 00 0d 95 b9 9c 00 04 00 00 current sda: sense = 70 3 ASC= c ASCQ= 2 Raw sense data:0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 0x00 0x0c 0x02 end_request: I/O error, dev sda, sector 227916204 ATA: abnormal status 0x58 on port 0xE181B087 ATA: abnormal status 0x58 on port 0xE181B087 ATA: abnormal status 0x58 on port 0xE181B087 I rebooted, repeated - same result. I also tried the precompiled binaries of 2.6.7 from the Debian archives, but that too yielded the same result. I also tried that it froze during boot a few times, when initializing all the daemons. In between I used the 2.4.26 kernel that came with Sarge, and it worked perfectly fine. I also have Windows 2000 on dual boot, and there's no problems there either, so I don't think it's a hardware problem. I heard that there has been a lot of work on SATA in 2.6.7 and 2.6.8, so could this be a bug? Thanks in advance, Morten Bojsen-Hansen morten at team60 dot dk