From: Yinghai Lu <yhlu.kernel@gmail.com>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
"Eric W. Biederman" <ebiederm@xmission.com>,
Dhaval Giani <dhaval@linux.vnet.ibm.com>,
Mike Travis <travis@sgi.com>,
Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, Yinghai Lu <yhlu.kernel@gmail.com>
Subject: [PATCH 33/43] replace loop with nr_irqs with for_each_irq_desc
Date: Sun, 10 Aug 2008 00:36:22 -0700 [thread overview]
Message-ID: <1218353792-3355-34-git-send-email-yhlu.kernel@gmail.com> (raw)
In-Reply-To: <1218353792-3355-33-git-send-email-yhlu.kernel@gmail.com>
so don't all irq_desc at begining to allocate all.
and only call that when needed
v2: make sure arch without GENERIC_HARDIRQS works too
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
---
arch/x86/kernel/io_apic_64.c | 6 +++---
arch/x86/kernel/irq_64.c | 5 ++---
arch/x86/kernel/irqinit_64.c | 17 +++++------------
include/linux/irq.h | 5 +++++
kernel/irq/internals.h | 4 ++--
kernel/irq/manage.c | 2 +-
kernel/irq/proc.c | 10 +++++-----
7 files changed, 23 insertions(+), 26 deletions(-)
diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c
index 32a18a4..0fc7f5a 100644
--- a/arch/x86/kernel/io_apic_64.c
+++ b/arch/x86/kernel/io_apic_64.c
@@ -1868,10 +1868,10 @@ unmask:
static void ir_irq_migration(struct work_struct *work)
{
- int irq;
+ unsigned int irq;
+ struct irq_desc *desc;
- for (irq = 0; irq < nr_irqs; irq++) {
- struct irq_desc *desc = irq_desc(irq);
+ for_each_irq_desc(irq, desc) {
if (desc->status & IRQ_MOVE_PENDING) {
unsigned long flags;
diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c
index 71b04bd..ee5ee2d 100644
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -224,17 +224,16 @@ void fixup_irqs(cpumask_t map)
{
unsigned int irq;
static int warned;
+ struct irq_desc *desc;
- for (irq = 0; irq < nr_irqs; irq++) {
+ for_each_irq_desc(irq, desc) {
cpumask_t mask;
int break_affinity = 0;
int set_affinity = 1;
- struct irq_desc *desc;
if (irq == 2)
continue;
- desc = irq_desc(irq);
/* interrupt's are disabled at this point */
spin_lock(&desc->lock);
diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c
index 583db8b..4c55edf 100644
--- a/arch/x86/kernel/irqinit_64.c
+++ b/arch/x86/kernel/irqinit_64.c
@@ -142,25 +142,18 @@ static void __init init_ISA_irqs (void)
init_bsp_APIC();
init_8259A(0);
- for (i = 0; i < nr_irqs; i++) {
+ for (i = 0; i < 16; i++) {
struct irq_desc *desc = irq_desc(i);
desc->status = IRQ_DISABLED;
desc->action = NULL;
desc->depth = 1;
- if (i < 16) {
- /*
- * 16 old-style INTA-cycle interrupts:
- */
- set_irq_chip_and_handler_name(i, &i8259A_chip,
+ /*
+ * 16 old-style INTA-cycle interrupts:
+ */
+ set_irq_chip_and_handler_name(i, &i8259A_chip,
handle_level_irq, "XT");
- } else {
- /*
- * 'high' PCI IRQs filled in on demand
- */
- desc->chip = &no_irq_chip;
- }
}
}
diff --git a/include/linux/irq.h b/include/linux/irq.h
index c13e645..4e39f2d 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -202,9 +202,14 @@ extern struct irq_desc irq_descX[NR_IRQS];
extern struct irq_desc *irq_descX;
#endif
+#define for_each_irq_desc(irq, desc) \
+ for (irq = 0, desc = irq_descX; irq < nr_irqs; irq++, desc = &irq_descX[irq])
+
#else
extern struct irq_desc *irq_descX;
+#define for_each_irq_desc(irqX, desc) \
+ for (desc = irq_descX, irqX = desc->irq; desc && irqX != -1U; desc = desc->next, irqX = desc ? desc->irq : -1U)
#endif
diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index 08a849a..605e88c 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -11,11 +11,11 @@ extern void irq_chip_set_defaults(struct irq_chip *chip);
extern void compat_irq_chip_set_default_handler(struct irq_desc *desc);
#ifdef CONFIG_PROC_FS
-extern void register_irq_proc(unsigned int irq);
+extern void register_irq_proc(unsigned int irq, struct irq_desc *desc);
extern void register_handler_proc(unsigned int irq, struct irqaction *action);
extern void unregister_handler_proc(unsigned int irq, struct irqaction *action);
#else
-static inline void register_irq_proc(unsigned int irq) { }
+static inline void register_irq_proc(unsigned int irq, struct irq_desc *desc) { }
static inline void register_handler_proc(unsigned int irq,
struct irqaction *action) { }
static inline void unregister_handler_proc(unsigned int irq,
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index c6b0edf..b7e30f2 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -466,7 +466,7 @@ int setup_irq(unsigned int irq, struct irqaction *new)
spin_unlock_irqrestore(&desc->lock, flags);
new->irq = irq;
- register_irq_proc(irq);
+ register_irq_proc(irq, desc);
new->dir = NULL;
register_handler_proc(irq, new);
diff --git a/kernel/irq/proc.c b/kernel/irq/proc.c
index ffb6000..32dd7b9 100644
--- a/kernel/irq/proc.c
+++ b/kernel/irq/proc.c
@@ -163,11 +163,10 @@ void register_handler_proc(unsigned int irq, struct irqaction *action)
#define MAX_NAMELEN 10
-void register_irq_proc(unsigned int irq)
+void register_irq_proc(unsigned int irq, struct irq_desc *desc)
{
char name [MAX_NAMELEN];
struct proc_dir_entry *entry;
- struct irq_desc *desc = irq_desc(irq);
if (!root_irq_dir ||
(desc->chip == &no_irq_chip) || desc->dir)
@@ -226,7 +225,8 @@ void register_default_affinity_proc(void)
void init_irq_proc(void)
{
- int i;
+ unsigned int irq;
+ struct irq_desc *desc;
/* create /proc/irq */
root_irq_dir = proc_mkdir("irq", NULL);
@@ -238,7 +238,7 @@ void init_irq_proc(void)
/*
* Create entries for all existing IRQs.
*/
- for (i = 0; i < nr_irqs; i++)
- register_irq_proc(i);
+ for_each_irq_desc(irq, desc)
+ register_irq_proc(irq, desc);
}
--
1.5.4.5
next prev parent reply other threads:[~2008-08-10 7:49 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-10 7:35 [PATCH 00/43] dyn_array/nr_irqs/sparse_irq support v7 Yinghai Lu
2008-08-10 7:35 ` [PATCH 01/43] x86_64: Restore the proper NR_IRQS define so larger systems work Yinghai Lu
2008-08-10 7:35 ` [PATCH 02/43] 8250: Remove NR_IRQ usage Yinghai Lu
2008-08-10 7:35 ` [PATCH 03/43] x86: add after_bootmem for 32bit Yinghai Lu
2008-08-10 7:35 ` [PATCH 04/43] x86: remove irq_vectors_limits Yinghai Lu
2008-08-10 7:35 ` [PATCH 05/43] add dyn_array support Yinghai Lu
2008-08-10 7:35 ` [PATCH 06/43] add per_cpu_dyn_array support Yinghai Lu
2008-08-10 7:35 ` [PATCH 07/43] x86: alloc dyn_array all alltogether Yinghai Lu
2008-08-10 7:35 ` [PATCH 08/43] x86: enable dyn_array support Yinghai Lu
2008-08-10 7:35 ` [PATCH 09/43] introduce nr_irqs Yinghai Lu
2008-08-10 7:35 ` [PATCH 10/43] x86: using nr_irqs Yinghai Lu
2008-08-10 7:36 ` [PATCH 11/43] drivers/char to use nr_irqs Yinghai Lu
2008-08-10 7:36 ` [PATCH 12/43] drivers/net " Yinghai Lu
2008-08-10 7:36 ` [PATCH 13/43] drivers intr remapping " Yinghai Lu
2008-08-10 7:36 ` [PATCH 14/43] drivers/pcmcia " Yinghai Lu
2008-08-10 7:36 ` [PATCH 15/43] drivers/rtc " Yinghai Lu
2008-08-10 7:36 ` [PATCH 16/43] drivers/scsi " Yinghai Lu
2008-08-10 7:36 ` [PATCH 17/43] drivers/serial " Yinghai Lu
2008-08-10 7:36 ` [PATCH 18/43] drivers proc " Yinghai Lu
2008-08-10 7:36 ` [PATCH 19/43] drivers xen events " Yinghai Lu
2008-08-10 7:36 ` [PATCH 20/43] make irq_timer_state to use dyn_array Yinghai Lu
2008-08-10 7:36 ` [PATCH 21/43] make irq2_iommu " Yinghai Lu
2008-08-10 7:36 ` [PATCH 22/43] make irq_desc " Yinghai Lu
2008-08-10 7:36 ` [PATCH 23/43] irq: make irqs in kernel stat use per_cpu_dyn_array Yinghai Lu
2008-08-10 7:36 ` [PATCH 24/43] x86: use dyn_array in io_apic_xx.c Yinghai Lu
2008-08-10 7:36 ` [PATCH 25/43] x86: get mp_irqs from madt Yinghai Lu
2008-08-10 7:36 ` [PATCH 26/43] x86: remove nr_irq_vectors Yinghai Lu
2008-08-10 7:36 ` [PATCH 27/43] x86_64: use irq_desc() together with dyn_array Yinghai Lu
2008-08-10 7:36 ` [PATCH 28/43] x86: add irq_cfg in io_apic_64.c Yinghai Lu
2008-08-10 7:36 ` [PATCH 29/43] x86: put irq_2_pin pointer into irq_cfg Yinghai Lu
2008-08-10 7:36 ` [PATCH 30/43] x86: put timer_rand_state pointer into irq_desc Yinghai Lu
2008-08-10 7:36 ` [PATCH 31/43] x86: move kstat_irqs from kstat to irq_desc Yinghai Lu
2008-08-10 7:36 ` [PATCH 32/43] add irq_desc_without_new Yinghai Lu
2008-08-10 7:36 ` Yinghai Lu [this message]
2008-08-10 7:36 ` [PATCH 34/43] replace loop with nr_irqs for proc/stat Yinghai Lu
2008-08-10 7:36 ` [PATCH 35/43] replace loop with nr_irqs with for_each_irq_icfg Yinghai Lu
2008-08-10 7:36 ` [PATCH 36/43] remove >= nr_irqs checking with config_have_sparse_irq Yinghai Lu
2008-08-10 7:36 ` [PATCH 37/43] x86_64: add irq_desc in function in paramater Yinghai Lu
2008-08-10 7:36 ` [PATCH 38/43] x86: check with without_new in show_interrupts Yinghai Lu
2008-08-10 7:36 ` [PATCH 39/43] x86_64: rename irq_desc/irq_desc_with_new Yinghai Lu
2008-08-10 7:36 ` [PATCH 40/43] seperate irq_descX with irq_descX_free Yinghai Lu
2008-08-10 7:36 ` [PATCH 41/43] x86_64: sperate irq_cfgx with irq_cfgx_free Yinghai Lu
2008-08-10 7:36 ` [PATCH 42/43] x86_64: make /proc/interrupts works with dyn irq_desc Yinghai Lu
2008-08-10 7:36 ` [PATCH 43/43] x86: put irq_2_iommu pointer into irq_desc Yinghai Lu
2008-08-10 9:21 ` [PATCH 00/43] dyn_array/nr_irqs/sparse_irq support v7 Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1218353792-3355-34-git-send-email-yhlu.kernel@gmail.com \
--to=yhlu.kernel@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=dhaval@linux.vnet.ibm.com \
--cc=ebiederm@xmission.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
--cc=travis@sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox