public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Yinghai Lu <yhlu.kernel@gmail.com>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
	"H. Peter Anvin" <hpa@zytor.com>,
	"Eric W. Biederman" <ebiederm@xmission.com>,
	Dhaval Giani <dhaval@linux.vnet.ibm.com>,
	Mike Travis <travis@sgi.com>,
	Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, Yinghai Lu <yhlu.kernel@gmail.com>
Subject: [PATCH 06/43] add per_cpu_dyn_array support
Date: Sun, 10 Aug 2008 00:35:55 -0700	[thread overview]
Message-ID: <1218353792-3355-7-git-send-email-yhlu.kernel@gmail.com> (raw)
In-Reply-To: <1218353792-3355-6-git-send-email-yhlu.kernel@gmail.com>

could make array in per_cpu is allocated dynamically too

usage:
| /* in .h */
|struct kernel_stat {
|       struct cpu_usage_stat   cpustat;
|       unsigned int *irqs;
|};
|
| /* in .c */
|DEFINE_PER_CPU(struct kernel_stat, kstat);
|
|DEFINE_PER_CPU_DYN_ARRAY_ADDR(per_cpu__kstat_irqs, per_cpu__kstat.irqs, sizeof(unsigned int), nr_irqs, sizeof(unsigned long), NULL);

after setup_percpu()/per_cpu_alloc_dyn_array(), that dyn_array in per_cpu area is ready to use

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
---
 arch/x86/kernel/setup_percpu.c    |    7 +++-
 include/asm-generic/vmlinux.lds.h |    6 +++
 include/linux/init.h              |   27 ++++++++++++++--
 init/main.c                       |   63 +++++++++++++++++++++++++++++++++++-
 4 files changed, 96 insertions(+), 7 deletions(-)

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 0e67f72..13ba7a8 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -140,7 +140,7 @@ static void __init setup_cpu_pda_map(void)
  */
 void __init setup_per_cpu_areas(void)
 {
-	ssize_t size = PERCPU_ENOUGH_ROOM;
+	ssize_t size, old_size;
 	char *ptr;
 	int cpu;
 
@@ -148,7 +148,8 @@ void __init setup_per_cpu_areas(void)
 	setup_cpu_pda_map();
 
 	/* Copy section for each CPU (we discard the original) */
-	size = PERCPU_ENOUGH_ROOM;
+	old_size = PERCPU_ENOUGH_ROOM;
+	size = old_size + per_cpu_dyn_array_size();
 	printk(KERN_INFO "PERCPU: Allocating %zd bytes of per cpu data\n",
 			  size);
 
@@ -176,6 +177,8 @@ void __init setup_per_cpu_areas(void)
 		per_cpu_offset(cpu) = ptr - __per_cpu_start;
 		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
 
+		per_cpu_alloc_dyn_array(cpu, ptr + old_size);
+
 	}
 
 	printk(KERN_DEBUG "NR_CPUS: %d, nr_cpu_ids: %d, nr_node_ids %d\n",
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 1c3daac..e76244a 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -220,6 +220,12 @@
 		VMLINUX_SYMBOL(__dyn_array_start) = .;			\
 		*(.dyn_array.init)					\
 		VMLINUX_SYMBOL(__dyn_array_end) = .;			\
+	}								\
+	. = ALIGN((align));						\
+	.per_cpu_dyn_array.init : AT(ADDR(.per_cpu_dyn_array.init) - LOAD_OFFSET) {	\
+		VMLINUX_SYMBOL(__per_cpu_dyn_array_start) = .;		\
+		*(.per_cpu_dyn_array.init)				\
+		VMLINUX_SYMBOL(__per_cpu_dyn_array_end) = .;		\
 	}
 #define SECURITY_INIT							\
 	.security_initcall.init : AT(ADDR(.security_initcall.init) - LOAD_OFFSET) { \
diff --git a/include/linux/init.h b/include/linux/init.h
index c31cd94..9fbe61b 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -258,12 +258,13 @@ struct dyn_array {
 	void (*init_work)(void *);
 };
 extern struct dyn_array *__dyn_array_start[], *__dyn_array_end[];
+extern struct dyn_array *__per_cpu_dyn_array_start[], *__per_cpu_dyn_array_end[];
 
-#define DEFINE_DYN_ARRAY(nameX, sizeX, nrX, alignX, init_workX) \
+#define DEFINE_DYN_ARRAY_ADDR(nameX, addrX, sizeX, nrX, alignX, init_workX) \
 		static struct dyn_array __dyn_array_##nameX __initdata = \
-		{	.name = (void **)&nameX,\
+		{	.name = (void **)&(nameX),\
 			.size = sizeX,\
-			.nr   = &nrX,\
+			.nr   = &(nrX),\
 			.align = alignX,\
 			.init_work = init_workX,\
 		}; \
@@ -271,7 +272,27 @@ extern struct dyn_array *__dyn_array_start[], *__dyn_array_end[];
 		__attribute__((__section__(".dyn_array.init"))) = \
 			&__dyn_array_##nameX
 
+#define DEFINE_DYN_ARRAY(nameX, sizeX, nrX, alignX, init_workX) \
+	DEFINE_DYN_ARRAY_ADDR(nameX, nameX, sizeX, nrX, alignX, init_workX)
+
+#define DEFINE_PER_CPU_DYN_ARRAY_ADDR(nameX, addrX, sizeX, nrX, alignX, init_workX) \
+		static struct dyn_array __per_cpu_dyn_array_##nameX __initdata = \
+		{	.name = (void **)&(addrX),\
+			.size = sizeX,\
+			.nr   = &(nrX),\
+			.align = alignX,\
+			.init_work = init_workX,\
+		}; \
+		static struct dyn_array *__per_cpu_dyn_array_ptr_##nameX __used \
+		__attribute__((__section__(".per_cpu_dyn_array.init"))) = \
+			&__per_cpu_dyn_array_##nameX
+
+#define DEFINE_PER_CPU_DYN_ARRAY(nameX, sizeX, nrX, alignX, init_workX) \
+	DEFINE_PER_CPU_DYN_ARRAY_ADDR(nameX, nameX, nrX, alignX, init_workX)
+
 extern void pre_alloc_dyn_array(void);
+extern unsigned long per_cpu_dyn_array_size(void);
+extern void per_cpu_alloc_dyn_array(int cpu, char *ptr);
 #endif /* __ASSEMBLY__ */
 
 /**
diff --git a/init/main.c b/init/main.c
index a53f1cf..18478d3 100644
--- a/init/main.c
+++ b/init/main.c
@@ -394,17 +394,19 @@ EXPORT_SYMBOL(__per_cpu_offset);
 
 static void __init setup_per_cpu_areas(void)
 {
-	unsigned long size, i;
+	unsigned long size, i, old_size;
 	char *ptr;
 	unsigned long nr_possible_cpus = num_possible_cpus();
 
 	/* Copy section for each CPU (we discard the original) */
-	size = ALIGN(PERCPU_ENOUGH_ROOM, PAGE_SIZE);
+	old_size = PERCPU_ENOUGH_ROOM;
+	size = ALIGN(old_size + per_cpu_dyn_array_size(), PAGE_SIZE);
 	ptr = alloc_bootmem_pages(size * nr_possible_cpus);
 
 	for_each_possible_cpu(i) {
 		__per_cpu_offset[i] = ptr - __per_cpu_start;
 		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
+		per_cpu_alloc_dyn_array(cpu, ptr + old_size);
 		ptr += size;
 	}
 }
@@ -562,6 +564,63 @@ void pre_alloc_dyn_array(void)
 #endif
 }
 
+unsigned long per_cpu_dyn_array_size(void)
+{
+	unsigned long total_size = 0;
+#ifdef CONFIG_HAVE_DYN_ARRAY
+	unsigned long size;
+	struct dyn_array **daa;
+
+	for (daa = __per_cpu_dyn_array_start ; daa < __per_cpu_dyn_array_end; daa++) {
+		struct dyn_array *da = *daa;
+
+		size = da->size * (*da->nr);
+		print_fn_descriptor_symbol("per_cpu_dyna_array %s ", da->name);
+		printk(KERN_CONT "size:%#lx nr:%d align:%#lx\n",
+			da->size, *da->nr, da->align);
+		total_size += roundup(size, da->align);
+	}
+	if (total_size)
+		printk(KERN_DEBUG "per_cpu_dyna_array total_size: %#lx\n",
+			 total_size);
+#endif
+	return total_size;
+}
+
+void per_cpu_alloc_dyn_array(int cpu, char *ptr)
+{
+#ifdef CONFIG_HAVE_DYN_ARRAY
+	unsigned long size, phys;
+	struct dyn_array **daa;
+	unsigned long addr;
+	void **array;
+
+	phys = virt_to_phys(ptr);
+
+	for (daa = __per_cpu_dyn_array_start ; daa < __per_cpu_dyn_array_end; daa++) {
+		struct dyn_array *da = *daa;
+
+		size = da->size * (*da->nr);
+		print_fn_descriptor_symbol("per_cpu_dyna_array %s ", da->name);
+		printk(KERN_CONT "size:%#lx nr:%d align:%#lx",
+			da->size, *da->nr, da->align);
+
+		phys = roundup(phys, da->align);
+		addr = (unsigned long)da->name;
+		addr += per_cpu_offset(cpu);
+		array = (void **)addr;
+		*array = phys_to_virt(phys);
+		*da->name = *array; /* so init_work could use it directly */
+		printk(KERN_CONT " %p ==> [%#lx - %#lx]\n", array, phys, phys + size);
+		phys += size;
+
+		if (da->init_work) {
+			da->init_work(da);
+		}
+	}
+#endif
+}
+
 asmlinkage void __init start_kernel(void)
 {
 	char * command_line;
-- 
1.5.4.5


  reply	other threads:[~2008-08-10  7:39 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-08-10  7:35 [PATCH 00/43] dyn_array/nr_irqs/sparse_irq support v7 Yinghai Lu
2008-08-10  7:35 ` [PATCH 01/43] x86_64: Restore the proper NR_IRQS define so larger systems work Yinghai Lu
2008-08-10  7:35   ` [PATCH 02/43] 8250: Remove NR_IRQ usage Yinghai Lu
2008-08-10  7:35     ` [PATCH 03/43] x86: add after_bootmem for 32bit Yinghai Lu
2008-08-10  7:35       ` [PATCH 04/43] x86: remove irq_vectors_limits Yinghai Lu
2008-08-10  7:35         ` [PATCH 05/43] add dyn_array support Yinghai Lu
2008-08-10  7:35           ` Yinghai Lu [this message]
2008-08-10  7:35             ` [PATCH 07/43] x86: alloc dyn_array all alltogether Yinghai Lu
2008-08-10  7:35               ` [PATCH 08/43] x86: enable dyn_array support Yinghai Lu
2008-08-10  7:35                 ` [PATCH 09/43] introduce nr_irqs Yinghai Lu
2008-08-10  7:35                   ` [PATCH 10/43] x86: using nr_irqs Yinghai Lu
2008-08-10  7:36                     ` [PATCH 11/43] drivers/char to use nr_irqs Yinghai Lu
2008-08-10  7:36                       ` [PATCH 12/43] drivers/net " Yinghai Lu
2008-08-10  7:36                         ` [PATCH 13/43] drivers intr remapping " Yinghai Lu
2008-08-10  7:36                           ` [PATCH 14/43] drivers/pcmcia " Yinghai Lu
2008-08-10  7:36                             ` [PATCH 15/43] drivers/rtc " Yinghai Lu
2008-08-10  7:36                               ` [PATCH 16/43] drivers/scsi " Yinghai Lu
2008-08-10  7:36                                 ` [PATCH 17/43] drivers/serial " Yinghai Lu
2008-08-10  7:36                                   ` [PATCH 18/43] drivers proc " Yinghai Lu
2008-08-10  7:36                                     ` [PATCH 19/43] drivers xen events " Yinghai Lu
2008-08-10  7:36                                       ` [PATCH 20/43] make irq_timer_state to use dyn_array Yinghai Lu
2008-08-10  7:36                                         ` [PATCH 21/43] make irq2_iommu " Yinghai Lu
2008-08-10  7:36                                           ` [PATCH 22/43] make irq_desc " Yinghai Lu
2008-08-10  7:36                                             ` [PATCH 23/43] irq: make irqs in kernel stat use per_cpu_dyn_array Yinghai Lu
2008-08-10  7:36                                               ` [PATCH 24/43] x86: use dyn_array in io_apic_xx.c Yinghai Lu
2008-08-10  7:36                                                 ` [PATCH 25/43] x86: get mp_irqs from madt Yinghai Lu
2008-08-10  7:36                                                   ` [PATCH 26/43] x86: remove nr_irq_vectors Yinghai Lu
2008-08-10  7:36                                                     ` [PATCH 27/43] x86_64: use irq_desc() together with dyn_array Yinghai Lu
2008-08-10  7:36                                                       ` [PATCH 28/43] x86: add irq_cfg in io_apic_64.c Yinghai Lu
2008-08-10  7:36                                                         ` [PATCH 29/43] x86: put irq_2_pin pointer into irq_cfg Yinghai Lu
2008-08-10  7:36                                                           ` [PATCH 30/43] x86: put timer_rand_state pointer into irq_desc Yinghai Lu
2008-08-10  7:36                                                             ` [PATCH 31/43] x86: move kstat_irqs from kstat to irq_desc Yinghai Lu
2008-08-10  7:36                                                               ` [PATCH 32/43] add irq_desc_without_new Yinghai Lu
2008-08-10  7:36                                                                 ` [PATCH 33/43] replace loop with nr_irqs with for_each_irq_desc Yinghai Lu
2008-08-10  7:36                                                                   ` [PATCH 34/43] replace loop with nr_irqs for proc/stat Yinghai Lu
2008-08-10  7:36                                                                     ` [PATCH 35/43] replace loop with nr_irqs with for_each_irq_icfg Yinghai Lu
2008-08-10  7:36                                                                       ` [PATCH 36/43] remove >= nr_irqs checking with config_have_sparse_irq Yinghai Lu
2008-08-10  7:36                                                                         ` [PATCH 37/43] x86_64: add irq_desc in function in paramater Yinghai Lu
2008-08-10  7:36                                                                           ` [PATCH 38/43] x86: check with without_new in show_interrupts Yinghai Lu
2008-08-10  7:36                                                                             ` [PATCH 39/43] x86_64: rename irq_desc/irq_desc_with_new Yinghai Lu
2008-08-10  7:36                                                                               ` [PATCH 40/43] seperate irq_descX with irq_descX_free Yinghai Lu
2008-08-10  7:36                                                                                 ` [PATCH 41/43] x86_64: sperate irq_cfgx with irq_cfgx_free Yinghai Lu
2008-08-10  7:36                                                                                   ` [PATCH 42/43] x86_64: make /proc/interrupts works with dyn irq_desc Yinghai Lu
2008-08-10  7:36                                                                                     ` [PATCH 43/43] x86: put irq_2_iommu pointer into irq_desc Yinghai Lu
2008-08-10  9:21 ` [PATCH 00/43] dyn_array/nr_irqs/sparse_irq support v7 Yinghai Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1218353792-3355-7-git-send-email-yhlu.kernel@gmail.com \
    --to=yhlu.kernel@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=dhaval@linux.vnet.ibm.com \
    --cc=ebiederm@xmission.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=tglx@linutronix.de \
    --cc=travis@sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox