[PATCH 1/1] iwlwifi: fix printk newlines

[PATCH 1/1] iwlwifi: fix printk newlines

[Jiri Slaby]

Add newlines at printk outputs to not break dmesg.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Zhu Yi <yi.zhu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-4965.c     |    2 +-
 drivers/net/wireless/iwlwifi/iwl-eeprom.c   |    6 +++---
 drivers/net/wireless/iwlwifi/iwl-sta.c      |    4 ++--
 drivers/net/wireless/iwlwifi/iwl-tx.c       |    4 ++--
 drivers/net/wireless/iwlwifi/iwl3945-base.c |    6 +++---
 5 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 22bb269..4a0cc78 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -967,7 +967,7 @@ static int iwl4965_interpolate_chan(struct iwl_priv *priv, u32 channel,
 
 	s = iwl4965_get_sub_band(priv, channel);
 	if (s >= EEPROM_TX_POWER_BANDS) {
-		IWL_ERROR("Tx Power can not find channel %d ", channel);
+		IWL_ERROR("Tx Power can not find channel %d\n", channel);
 		return -1;
 	}
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index bce5383..19985bf 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -146,7 +146,7 @@ int iwlcore_eeprom_verify_signature(struct iwl_priv *priv)
 {
 	u32 gp = iwl_read32(priv, CSR_EEPROM_GP);
 	if ((gp & CSR_EEPROM_GP_VALID_MSK) == CSR_EEPROM_GP_BAD_SIGNATURE) {
-		IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x", gp);
+		IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x\n", gp);
 		return -ENOENT;
 	}
 	return 0;
@@ -227,7 +227,7 @@ int iwl_eeprom_init(struct iwl_priv *priv)
 
 	ret = priv->cfg->ops->lib->eeprom_ops.verify_signature(priv);
 	if (ret < 0) {
-		IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x", gp);
+		IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x\n", gp);
 		ret = -ENOENT;
 		goto err;
 	}
@@ -254,7 +254,7 @@ int iwl_eeprom_init(struct iwl_priv *priv)
 		}
 
 		if (!(r & CSR_EEPROM_REG_READ_VALID_MSK)) {
-			IWL_ERROR("Time out reading EEPROM[%d]", addr);
+			IWL_ERROR("Time out reading EEPROM[%d]\n", addr);
 			ret = -ETIMEDOUT;
 			goto done;
 		}
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 60a6e01..6283a3a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -207,7 +207,7 @@ static void iwl_set_ht_add_station(struct iwl_priv *priv, u8 index,
 	case WLAN_HT_CAP_MIMO_PS_DISABLED:
 		break;
 	default:
-		IWL_WARNING("Invalid MIMO PS mode %d", mimo_ps_mode);
+		IWL_WARNING("Invalid MIMO PS mode %d\n", mimo_ps_mode);
 		break;
 	}
 
@@ -969,7 +969,7 @@ int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr)
 		return priv->hw_params.bcast_sta_id;
 
 	default:
-		IWL_WARNING("Unknown mode of operation: %d", priv->iw_mode);
+		IWL_WARNING("Unknown mode of operation: %d\n", priv->iw_mode);
 		return priv->hw_params.bcast_sta_id;
 	}
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 4108c7c..d82823b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -493,7 +493,7 @@ int iwl_txq_ctx_reset(struct iwl_priv *priv)
 	/* Alloc keep-warm buffer */
 	ret = iwl_kw_alloc(priv);
 	if (ret) {
-		IWL_ERROR("Keep Warm allocation failed");
+		IWL_ERROR("Keep Warm allocation failed\n");
 		goto error_kw;
 	}
 	spin_lock_irqsave(&priv->lock, flags);
@@ -1463,7 +1463,7 @@ void iwl_rx_reply_compressed_ba(struct iwl_priv *priv,
 	u16 ba_resp_scd_ssn = le16_to_cpu(ba_resp->scd_ssn);
 
 	if (scd_flow >= priv->hw_params.max_txq_num) {
-		IWL_ERROR("BUG_ON scd_flow is bigger than number of queues");
+		IWL_ERROR("BUG_ON scd_flow is bigger than number of queues\n");
 		return;
 	}
 
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 444847a..348048a 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -1558,7 +1558,7 @@ int iwl3945_eeprom_init(struct iwl3945_priv *priv)
 	BUILD_BUG_ON(sizeof(priv->eeprom) != IWL_EEPROM_IMAGE_SIZE);
 
 	if ((gp & CSR_EEPROM_GP_VALID_MSK) == CSR_EEPROM_GP_BAD_SIGNATURE) {
-		IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x", gp);
+		IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x\n", gp);
 		return -ENOENT;
 	}
 
@@ -1583,7 +1583,7 @@ int iwl3945_eeprom_init(struct iwl3945_priv *priv)
 		}
 
 		if (!(r & CSR_EEPROM_REG_READ_VALID_MSK)) {
-			IWL_ERROR("Time out reading EEPROM[%d]", addr);
+			IWL_ERROR("Time out reading EEPROM[%d]\n", addr);
 			return -ETIMEDOUT;
 		}
 		e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
@@ -2507,7 +2507,7 @@ static int iwl3945_get_sta_id(struct iwl3945_priv *priv, struct ieee80211_hdr *h
 		return priv->hw_setting.bcast_sta_id;
 
 	default:
-		IWL_WARNING("Unknown mode of operation: %d", priv->iw_mode);
+		IWL_WARNING("Unknown mode of operation: %d\n", priv->iw_mode);
 		return priv->hw_setting.bcast_sta_id;
 	}
 }
-- 
1.5.6.5

Re: [PATCH 1/1] iwlwifi: fix printk newlines

[Marcel Holtmann]

Hi Jiri,

> Add newlines at printk outputs to not break dmesg.
> 
> Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
> Cc: Zhu Yi <yi.zhu@intel.com>
> Cc: Reinette Chatre <reinette.chatre@intel.com>
> Cc: John W. Linville <linville@tuxdriver.com>
> ---
>  drivers/net/wireless/iwlwifi/iwl-4965.c     |    2 +-
>  drivers/net/wireless/iwlwifi/iwl-eeprom.c   |    6 +++---
>  drivers/net/wireless/iwlwifi/iwl-sta.c      |    4 ++--
>  drivers/net/wireless/iwlwifi/iwl-tx.c       |    4 ++--
>  drivers/net/wireless/iwlwifi/iwl3945-base.c |    6 +++---
>  5 files changed, 11 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
> index 22bb269..4a0cc78 100644
> --- a/drivers/net/wireless/iwlwifi/iwl-4965.c
> +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
> @@ -967,7 +967,7 @@ static int iwl4965_interpolate_chan(struct iwl_priv *priv, u32 channel,
>  
>  	s = iwl4965_get_sub_band(priv, channel);
>  	if (s >= EEPROM_TX_POWER_BANDS) {
> -		IWL_ERROR("Tx Power can not find channel %d ", channel);
> +		IWL_ERROR("Tx Power can not find channel %d\n", channel);
>  		return -1;
>  	}

can we not just fix IWL_ERROR to always append the newline?

Regards

Marcel

Re: [PATCH 1/1] iwlwifi: fix printk newlines

[Zhu Yi]

On Mon, 2008-08-11 at 23:49 +0200, Jiri Slaby wrote:
> Add newlines at printk outputs to not break dmesg.
> 
> Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
> Cc: Zhu Yi <yi.zhu@intel.com>
> Cc: Reinette Chatre <reinette.chatre@intel.com>
> Cc: John W. Linville <linville@tuxdriver.com>

Ack.

Thanks,
-yi

Re: [ipw3945-devel] [PATCH 1/1] iwlwifi: fix printk newlines

[Zhu Yi]

On Tue, 2008-08-12 at 02:55 +0200, Marcel Holtmann wrote:
> >       s = iwl4965_get_sub_band(priv, channel);
> >       if (s >= EEPROM_TX_POWER_BANDS) {
> > -             IWL_ERROR("Tx Power can not find channel %d ",
> channel);
> > +             IWL_ERROR("Tx Power can not find channel %d\n",
> channel);
> >               return -1;
> >       }
> 
> can we not just fix IWL_ERROR to always append the newline?

We should give the users more control to the style I think.

Thanks,
-yi

Re: [ipw3945-devel] [PATCH 1/1] iwlwifi: fix printk newlines

[Marcel Holtmann]

Hi Yi,

> > >       s = iwl4965_get_sub_band(priv, channel);
> > >       if (s >= EEPROM_TX_POWER_BANDS) {
> > > -             IWL_ERROR("Tx Power can not find channel %d ",
> > channel);
> > > +             IWL_ERROR("Tx Power can not find channel %d\n",
> > channel);
> > >               return -1;
> > >       }
> > 
> > can we not just fix IWL_ERROR to always append the newline?
> 
> We should give the users more control to the style I think.

what kind of control do you expect? If you need two lines of debug or
error output, call IWL_ERROR twice. This will also result in the
KERN_ERR is set and not forgotten since that has to follow the newline.

Regards

Marcel

Re: [ipw3945-devel] [PATCH 1/1] iwlwifi: fix printk newlines

[Zhu Yi]

On Tue, 2008-08-12 at 05:59 +0200, Marcel Holtmann wrote:
> > We should give the users more control to the style I think.
> 
> what kind of control do you expect? If you need two lines of debug or
> error output, call IWL_ERROR twice. This will also result in the
> KERN_ERR is set and not forgotten since that has to follow the
> newline.

I thought sometimes we might not need a new line between two IWL_ERRORs.
But your KERN_ERR garbaging the output in this case is correct. I think
when we wrote the macro, we just follow the style of dev_info() ...
dev_emerg() macros. Do you know why there is not a new line for them by
default?

Thanks,
-yi

Re: [ipw3945-devel] [PATCH 1/1] iwlwifi: fix printk newlines

[Marcel Holtmann]

Hi Yi,

> > > We should give the users more control to the style I think.
> > 
> > what kind of control do you expect? If you need two lines of debug or
> > error output, call IWL_ERROR twice. This will also result in the
> > KERN_ERR is set and not forgotten since that has to follow the
> > newline.
> 
> I thought sometimes we might not need a new line between two IWL_ERRORs.
> But your KERN_ERR garbaging the output in this case is correct. I think
> when we wrote the macro, we just follow the style of dev_info() ...
> dev_emerg() macros. Do you know why there is not a new line for them by
> default?

I have no idea. Maybe because they are close to printk. I always put the
newline into my macros.

Regards

Marcel