From: Kumar Gala <galak@kernel.crashing.org>
To: linux-kernel@vger.kernel.org
Cc: akpm@linux-foundation.org
Subject: [PATCH 7/9] powerpc: convert CONFIG_PPC_MERGE to CONFIG_PPC for legacy io checks
Date: Wed, 20 Aug 2008 23:46:56 -0500 [thread overview]
Message-ID: <1219294018-12557-8-git-send-email-galak@kernel.crashing.org> (raw)
In-Reply-To: <1219294018-12557-7-git-send-email-galak@kernel.crashing.org>
Now that arch/ppc is dead CONFIG_PPC_MERGE is always defined for all
powerpc platforms and we want to get rid of CONFIG_PPC_MERGE use
CONFIG_PPC instead.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
drivers/block/floppy.c | 2 +-
drivers/char/ipmi/ipmi_si_intf.c | 2 +-
drivers/i2c/busses/i2c-pca-isa.c | 2 +-
drivers/input/serio/i8042-io.h | 2 +-
drivers/pnp/isapnp/core.c | 2 +-
drivers/pnp/pnpbios/core.c | 4 ++--
6 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 395f8ea..5813e0d 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4165,7 +4165,7 @@ static int __init floppy_init(void)
int i, unit, drive;
int err, dr;
-#if defined(CONFIG_PPC_MERGE)
+#if defined(CONFIG_PPC)
if (check_legacy_ioport(FDC1))
return -ENODEV;
#endif
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 8e8afb6..3123bf5 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -2695,7 +2695,7 @@ static __devinit void default_find_bmc(void)
for (i = 0; ; i++) {
if (!ipmi_defaults[i].port)
break;
-#ifdef CONFIG_PPC_MERGE
+#ifdef CONFIG_PPC
if (check_legacy_ioport(ipmi_defaults[i].port))
continue;
#endif
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index a119784..28d8463 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -113,7 +113,7 @@ static int __devinit pca_isa_probe(struct device *dev, unsigned int id)
dev_info(dev, "i/o base %#08lx. irq %d\n", base, irq);
-#ifdef CONFIG_PPC_MERGE
+#ifdef CONFIG_PPC
if (check_legacy_ioport(base)) {
dev_err(dev, "I/O address %#08lx is not available\n", base);
goto out;
diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h
index f451c73..847f4aa 100644
--- a/drivers/input/serio/i8042-io.h
+++ b/drivers/input/serio/i8042-io.h
@@ -67,7 +67,7 @@ static inline int i8042_platform_init(void)
* On some platforms touching the i8042 data register region can do really
* bad things. Because of this the region is always reserved on such boxes.
*/
-#if defined(CONFIG_PPC_MERGE)
+#if defined(CONFIG_PPC)
if (check_legacy_ioport(I8042_DATA_REG))
return -ENODEV;
#endif
diff --git a/drivers/pnp/isapnp/core.c b/drivers/pnp/isapnp/core.c
index 101a835..46455fb 100644
--- a/drivers/pnp/isapnp/core.c
+++ b/drivers/pnp/isapnp/core.c
@@ -1012,7 +1012,7 @@ static int __init isapnp_init(void)
printk(KERN_INFO "isapnp: ISA Plug & Play support disabled\n");
return 0;
}
-#ifdef CONFIG_PPC_MERGE
+#ifdef CONFIG_PPC
if (check_legacy_ioport(_PIDXR) || check_legacy_ioport(_PNPWRP))
return -EINVAL;
#endif
diff --git a/drivers/pnp/pnpbios/core.c b/drivers/pnp/pnpbios/core.c
index 19a4be1..0797dd1 100644
--- a/drivers/pnp/pnpbios/core.c
+++ b/drivers/pnp/pnpbios/core.c
@@ -519,7 +519,7 @@ static int __init pnpbios_init(void)
{
int ret;
-#if defined(CONFIG_PPC_MERGE)
+#if defined(CONFIG_PPC)
if (check_legacy_ioport(PNPBIOS_BASE))
return -ENODEV;
#endif
@@ -577,7 +577,7 @@ static int __init pnpbios_thread_init(void)
{
struct task_struct *task;
-#if defined(CONFIG_PPC_MERGE)
+#if defined(CONFIG_PPC)
if (check_legacy_ioport(PNPBIOS_BASE))
return 0;
#endif
--
1.5.5.1
next prev parent reply other threads:[~2008-08-21 4:49 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-21 4:46 [PATCH 00/08] powerpc: Remove use of CONFIG_PPC_MERGE Kumar Gala
2008-08-21 4:46 ` [PATCH 1/9] usb: remove code associated with !CONFIG_PPC_MERGE Kumar Gala
2008-08-21 4:46 ` [PATCH 2/9] fs-enet: " Kumar Gala
2008-08-21 4:46 ` [PATCH 3/9] netdev: drop CONFIG_PPC_MERGE from Kconfig Kumar Gala
2008-08-21 4:46 ` [PATCH 4/9] rtc: use CONFIG_PPC instead of CONFIG_PPC_MERGE Kumar Gala
2008-08-21 4:46 ` [PATCH 5/9] serial/mpc52xx_uart: remove code associated with !CONFIG_PPC_MERGE Kumar Gala
2008-08-21 4:46 ` [PATCH 6/9] mpc52xx_psc_spi: " Kumar Gala
2008-08-21 4:46 ` Kumar Gala [this message]
2008-08-21 4:46 ` [PATCH 8/9] pata_sil680: convert CONFIG_PPC_MERGE to CONFIG_PPC Kumar Gala
2008-08-21 4:46 ` [PATCH 9/9] mtd: remove code associated with !CONFIG_PPC_MERGE Kumar Gala
2008-10-15 21:23 ` [PATCH 6/9] mpc52xx_psc_spi: " Kumar Gala
2008-10-15 21:34 ` David Brownell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1219294018-12557-8-git-send-email-galak@kernel.crashing.org \
--to=galak@kernel.crashing.org \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox