[PATCH 1/5] add DEFINE_LOGLEVEL_SETUP v2

[PATCH 1/5] add DEFINE_LOGLEVEL_SETUP v2

[Yinghai Lu]

so could make subsys easy to add loglevel and xxx_printk
v2: make it more genric, so subsys user only need to two line macro

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
---
 arch/x86/kernel/vmlinux_32.lds.S  |    1 +
 arch/x86/kernel/vmlinux_64.lds.S  |    2 ++
 include/asm-generic/vmlinux.lds.h |    8 ++++++++
 include/linux/init.h              |   36 ++++++++++++++++++++++++++++++++++++
 include/linux/kernel.h            |    9 +++++++++
 init/main.c                       |   28 +++++++++++++++++++++++++++-
 6 files changed, 83 insertions(+), 1 deletion(-)

Index: linux-2.6/arch/x86/kernel/vmlinux_32.lds.S
===================================================================
--- linux-2.6.orig/arch/x86/kernel/vmlinux_32.lds.S
+++ linux-2.6/arch/x86/kernel/vmlinux_32.lds.S
@@ -145,6 +145,7 @@ SECTIONS
 	*(.x86_cpu_dev.init)
 	__x86_cpu_dev_end = .;
   }
+  LOGLEVEL_SETUP_INIT(8)
   DYN_ARRAY_INIT(8)
   SECURITY_INIT
   . = ALIGN(4);
Index: linux-2.6/arch/x86/kernel/vmlinux_64.lds.S
===================================================================
--- linux-2.6.orig/arch/x86/kernel/vmlinux_64.lds.S
+++ linux-2.6/arch/x86/kernel/vmlinux_64.lds.S
@@ -174,6 +174,8 @@ SECTIONS
   }
   __x86_cpu_dev_end = .;
 
+  LOGLEVEL_SETUP_INIT(8)
+
   DYN_ARRAY_INIT(8)
 
   SECURITY_INIT
Index: linux-2.6/include/asm-generic/vmlinux.lds.h
===================================================================
--- linux-2.6.orig/include/asm-generic/vmlinux.lds.h
+++ linux-2.6/include/asm-generic/vmlinux.lds.h
@@ -222,6 +222,14 @@
  * All archs are supposed to use RO_DATA() */
 #define RODATA RO_DATA(4096)
 
+#define LOGLEVEL_SETUP_INIT(align)					\
+	. = ALIGN((align));						\
+	.loglevel_setup.init : AT(ADDR(.loglevel_setup.init) - LOAD_OFFSET) {	\
+		VMLINUX_SYMBOL(__loglevel_setup_start) = .;		\
+		*(.loglevel_setup.init)					\
+		VMLINUX_SYMBOL(__loglevel_setup_end) = .;		\
+	}
+
 #define DYN_ARRAY_INIT(align)							\
 	. = ALIGN((align));						\
 	.dyn_array.init : AT(ADDR(.dyn_array.init) - LOAD_OFFSET) {	\
Index: linux-2.6/include/linux/init.h
===================================================================
--- linux-2.6.orig/include/linux/init.h
+++ linux-2.6/include/linux/init.h
@@ -251,6 +251,42 @@ struct obs_kernel_param {
 /* Relies on boot_command_line being set */
 void __init parse_early_param(void);
 
+#define DECLARE_LOGLEVEL(nameX)					\
+	extern int loglevel_##nameX;				\
+	extern int nameX##_printk(int v, const char *fmt, ...)
+
+struct loglevel_setup {
+	char *name;
+	void (*setup)(char *);
+};
+
+extern struct loglevel_setup *__loglevel_setup_start[], *__loglevel_setup_end[];
+
+#define DEFINE_LOGLEVEL_SETUP(nameX)				\
+	int loglevel_##nameX;					\
+	int nameX##_printk(int v, const char *fmt, ...)		\
+	{							\
+		va_list args;					\
+		int r;						\
+		if (v > loglevel_##nameX)			\
+			return 0;				\
+		va_start(args, fmt);				\
+		r = vprintk(fmt, args);				\
+		va_end(args);					\
+		return r;					\
+	}							\
+	static void __init setup_loglevel_##nameX(char *str)	\
+	{							\
+		get_option(&str, &loglevel_##nameX);		\
+	}							\
+	static struct loglevel_setup __loglevel_setup_##nameX __initdata = \
+	{	.name = #nameX,					\
+		.setup = setup_loglevel_##nameX,		\
+	};							\
+	static struct loglevel_setup *__loglevel_setup_ptr_##nameX __used \
+	__attribute__((__section__(".loglevel_setup.init"))) =	\
+		&__loglevel_setup_##nameX
+
 struct dyn_array {
 	void **name;
 	unsigned long size;
Index: linux-2.6/include/linux/kernel.h
===================================================================
--- linux-2.6.orig/include/linux/kernel.h
+++ linux-2.6/include/linux/kernel.h
@@ -104,6 +104,15 @@ extern int console_printk[];
 #define minimum_console_loglevel (console_printk[2])
 #define default_console_loglevel (console_printk[3])
 
+#define	KERN_LOG_EMERG	0	/* system is unusable			*/
+#define	KERN_LOG_ALERT	1	/* action must be taken immediately	*/
+#define	KERN_LOG_CRIT	2	/* critical conditions			*/
+#define	KERN_LOG_ERR	3	/* error conditions			*/
+#define	KERN_LOG_WARNING	4	/* warning conditions			*/
+#define	KERN_LOG_NOTICE	5	/* normal but significant condition	*/
+#define	KERN_LOG_INFO	6	/* informational			*/
+#define	KERN_LOG_DEBUG	7	/* debug-level messages			*/
+
 struct completion;
 struct pt_regs;
 struct user;
Index: linux-2.6/init/main.c
===================================================================
--- linux-2.6.orig/init/main.c
+++ linux-2.6/init/main.c
@@ -248,9 +248,35 @@ static int __init quiet_kernel(char *str
 early_param("debug", debug_kernel);
 early_param("quiet", quiet_kernel);
 
+static char __init *real_loglevel_setup(char *str)
+{
+	struct loglevel_setup **la;
+
+	for (la = __loglevel_setup_start ; la < __loglevel_setup_end; la++) {
+		struct loglevel_setup *l = *la;
+		int len = strlen(l->name);
+
+		if (!strncmp(str, l->name, len)) {
+			/* skip one : */
+			l->setup(str + len + 1);
+			str = NULL;
+			break;
+		}
+	}
+
+	return str;
+}
 static int __init loglevel(char *str)
 {
-	get_option(&str, &console_loglevel);
+	while (str) {
+		char *k = strchr(str, ',');
+		if (k)
+			*k++ = 0;
+		if (*str && (str = real_loglevel_setup(str)) && *str) {
+			get_option(&str, &console_loglevel);
+		}
+		str = k;
+	}
 	return 0;
 }
 

[PATCH 2/5] pci: add pci_printk v2

[Yinghai Lu]

use DEFINE_LOGLEVEL_SETUP to set loglevel for pci
v2: two lines only

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
---
 drivers/pci/pci.c   |    2 ++
 include/linux/pci.h |    2 ++
 2 files changed, 4 insertions(+)

Index: linux-2.6/drivers/pci/pci.c
===================================================================
--- linux-2.6.orig/drivers/pci/pci.c
+++ linux-2.6/drivers/pci/pci.c
@@ -1953,6 +1953,8 @@ static int __devinit pci_setup(char *str
 }
 early_param("pci", pci_setup);
 
+DEFINE_LOGLEVEL_SETUP(pci);
+
 device_initcall_sync(pci_init);
 
 EXPORT_SYMBOL(pci_reenable_device);
Index: linux-2.6/include/linux/pci.h
===================================================================
--- linux-2.6.orig/include/linux/pci.h
+++ linux-2.6/include/linux/pci.h
@@ -55,6 +55,8 @@
 /* Include the ID list */
 #include <linux/pci_ids.h>
 
+DECLARE_LOGLEVEL(pci);
+
 /* pci_slot represents a physical slot */
 struct pci_slot {
 	struct pci_bus *bus;		/* The bus this slot is on */

[PATCH 3/5] pci: using pci_printk

[Yinghai Lu]

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>

---
 drivers/pci/probe.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

Index: linux-2.6/drivers/pci/probe.c
===================================================================
--- linux-2.6.orig/drivers/pci/probe.c
+++ linux-2.6/drivers/pci/probe.c
@@ -304,7 +304,7 @@ static int __pci_read_base(struct pci_de
 		} else {
 			res->start = l64;
 			res->end = l64 + sz64;
-			printk(KERN_DEBUG "PCI: %s reg %x 64bit mmio: [%llx, %llx]\n",
+			pci_printk(KERN_LOG_DEBUG, KERN_DEBUG "PCI: %s reg %x 64bit mmio: [%llx, %llx]\n",
 				 pci_name(dev), pos, res->start, res->end);
 		}
 	} else {
@@ -315,7 +315,7 @@ static int __pci_read_base(struct pci_de
 
 		res->start = l;
 		res->end = l + sz;
-		printk(KERN_DEBUG "PCI: %s reg %x %s: [%llx, %llx]\n", pci_name(dev),
+		pci_printk(KERN_LOG_DEBUG, KERN_DEBUG "PCI: %s reg %x %s: [%llx, %llx]\n", pci_name(dev),
 			 pos, (res->flags & IORESOURCE_IO) ? "io port":"32bit mmio",
 			 res->start, res->end);
 	}
@@ -388,7 +388,7 @@ void __devinit pci_read_bridge_bases(str
 			res->start = base;
 		if (!res->end)
 			res->end = limit + 0xfff;
-		printk(KERN_DEBUG "PCI: bridge %s io port: [%llx, %llx]\n",
+		pci_printk(KERN_LOG_DEBUG, KERN_DEBUG "PCI: bridge %s io port: [%llx, %llx]\n",
 				 pci_name(dev), res->start, res->end);
 	}
 
@@ -401,7 +401,7 @@ void __devinit pci_read_bridge_bases(str
 		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
 		res->start = base;
 		res->end = limit + 0xfffff;
-		printk(KERN_DEBUG "PCI: bridge %s 32bit mmio: [%llx, %llx]\n",
+		pci_printk(KERN_LOG_DEBUG, KERN_DEBUG "PCI: bridge %s 32bit mmio: [%llx, %llx]\n",
 				 pci_name(dev), res->start, res->end);
 	}
 
@@ -438,7 +438,7 @@ void __devinit pci_read_bridge_bases(str
 		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH;
 		res->start = base;
 		res->end = limit + 0xfffff;
-		printk(KERN_DEBUG "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n",
+		pci_printk(KERN_LOG_DEBUG, KERN_DEBUG "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n",
 				 pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64)?"64":"32",
 				 res->start, res->end);
 	}

[PATCH 4/5] acpi: add acpi_printk

[Yinghai Lu]

use DEFINE_LOGLEVEL_SETUP to set loglevel for acpi

---
 drivers/acpi/osl.c   |    2 ++
 include/linux/acpi.h |    1 +
 2 files changed, 3 insertions(+)

Index: linux-2.6/drivers/acpi/osl.c
===================================================================
--- linux-2.6.orig/drivers/acpi/osl.c
+++ linux-2.6/drivers/acpi/osl.c
@@ -75,6 +75,8 @@ EXPORT_SYMBOL(acpi_in_debugger);
 extern char line_buf[80];
 #endif				/*ENABLE_DEBUGGER */
 
+DEFINE_LOGLEVEL_SETUP(acpi);
+
 static unsigned int acpi_irq_irq;
 static acpi_osd_handler acpi_irq_handler;
 static void *acpi_irq_context;
Index: linux-2.6/include/linux/acpi.h
===================================================================
--- linux-2.6.orig/include/linux/acpi.h
+++ linux-2.6/include/linux/acpi.h
@@ -43,6 +43,7 @@
 #include <asm/acpi.h>
 #include <linux/dmi.h>
 
+DECLARE_LOGLEVEL(acpi);
 
 enum acpi_irq_model_id {
 	ACPI_IRQ_MODEL_PIC = 0,

[PATCH 5/5] apci: dump slit v3

[Yinghai Lu]

v2: using boot_printk
v3: using acpi_printk

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>

---
 drivers/acpi/numa.c |    8 ++++++++
 1 file changed, 8 insertions(+)

Index: linux-2.6/drivers/acpi/numa.c
===================================================================
--- linux-2.6.orig/drivers/acpi/numa.c
+++ linux-2.6/drivers/acpi/numa.c
@@ -150,6 +150,14 @@ static __init int slit_valid(struct acpi
 {
 	int i, j;
 	int d = slit->locality_count;
+	acpi_printk(KERN_LOG_DEBUG, KERN_DEBUG "ACPI: SLIT: nodes = %d\n", d);
+	for (i = 0; i < d; i++) {
+		for (j = 0; j < d; j++)  {
+			u8 val = slit->entry[d*i + j];
+			acpi_printk(KERN_LOG_DEBUG, " %d", val);
+		}
+		acpi_printk(KERN_LOG_DEBUG, "\n");
+	}
 	for (i = 0; i < d; i++) {
 		for (j = 0; j < d; j++)  {
 			u8 val = slit->entry[d*i + j];

Re: [PATCH 5/5] apci: dump slit v3

[Cyrill Gorcunov]

[Yinghai Lu - Tue, Sep 16, 2008 at 01:52:54AM -0700]
| v2: using boot_printk
| v3: using acpi_printk
| 
| Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
| 
| ---
|  drivers/acpi/numa.c |    8 ++++++++
|  1 file changed, 8 insertions(+)
| 
| Index: linux-2.6/drivers/acpi/numa.c
| ===================================================================
| --- linux-2.6.orig/drivers/acpi/numa.c
| +++ linux-2.6/drivers/acpi/numa.c
| @@ -150,6 +150,14 @@ static __init int slit_valid(struct acpi
|  {
|  	int i, j;
|  	int d = slit->locality_count;
| +	acpi_printk(KERN_LOG_DEBUG, KERN_DEBUG "ACPI: SLIT: nodes = %d\n", d);
| +	for (i = 0; i < d; i++) {
| +		for (j = 0; j < d; j++)  {
| +			u8 val = slit->entry[d*i + j];
| +			acpi_printk(KERN_LOG_DEBUG, " %d", val);
| +		}
| +		acpi_printk(KERN_LOG_DEBUG, "\n");
| +	}
|  	for (i = 0; i < d; i++) {
|  		for (j = 0; j < d; j++)  {
|  			u8 val = slit->entry[d*i + j];
| 

I suppose there will be some apic_pr_... macro since
typing ~40 symbols to print a message a bit annoying.
Yinghai?

		- Cyrill -

Re: [PATCH 3/5] pci: using pci_printk

[Alexey Dobriyan]

On Tue, Sep 16, 2008 at 01:52:52AM -0700, Yinghai Lu wrote:
> --- linux-2.6.orig/drivers/pci/probe.c
> +++ linux-2.6/drivers/pci/probe.c
> @@ -304,7 +304,7 @@ static int __pci_read_base(struct pci_de

> -			printk(KERN_DEBUG "PCI: %s reg %x 64bit mmio: [%llx, %llx]\n",
> +			pci_printk(KERN_LOG_DEBUG, KERN_DEBUG "PCI: %s reg %x 64bit mmio: [%llx, %llx]\n",
				   ^^^^^^^^^^^^^^^^^^^^^^^^^^

Brilliant, simply brilliant!

Printk haters club is definitely creative, no questions.

Re: [PATCH 3/5] pci: using pci_printk

[Robert Richter]

On 16.09.08 14:20:52, Alexey Dobriyan wrote:
> On Tue, Sep 16, 2008 at 01:52:52AM -0700, Yinghai Lu wrote:
> > --- linux-2.6.orig/drivers/pci/probe.c
> > +++ linux-2.6/drivers/pci/probe.c
> > @@ -304,7 +304,7 @@ static int __pci_read_base(struct pci_de
> 
> > -			printk(KERN_DEBUG "PCI: %s reg %x 64bit mmio: [%llx, %llx]\n",
> > +			pci_printk(KERN_LOG_DEBUG, KERN_DEBUG "PCI: %s reg %x 64bit mmio: [%llx, %llx]\n",
> 				   ^^^^^^^^^^^^^^^^^^^^^^^^^^
> 
> Brilliant, simply brilliant!

Wouldn't it be much simpler to have an i/f as for dev_dbg() and also
run the log level check only for debug messages? And, the dev_dbg()
macro seems to have code that can be binary pached (?) to enable it if
the compile option is not set.

-Robert

#define dev_dbg(dev, format, arg...)            \
        ({ if (0) dev_printk(KERN_DEBUG, dev, format, ##arg); 0; })


-- 
Advanced Micro Devices, Inc.
Operating System Research Center
email: robert.richter@amd.com

[PATCH 5/5] apci: dump slit v3

[Yinghai Lu]

v2: using boot_printk
v3: using acpi_printk

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>

---
 drivers/acpi/numa.c |    8 ++++++++
 1 file changed, 8 insertions(+)

Index: linux-2.6/drivers/acpi/numa.c
===================================================================
--- linux-2.6.orig/drivers/acpi/numa.c
+++ linux-2.6/drivers/acpi/numa.c
@@ -150,6 +150,14 @@ static __init int slit_valid(struct acpi
 {
 	int i, j;
 	int d = slit->locality_count;
+	acpi_printk(KERN_LOG_DEBUG, KERN_DEBUG "ACPI: SLIT: nodes = %d\n", d);
+	for (i = 0; i < d; i++) {
+		for (j = 0; j < d; j++)  {
+			u8 val = slit->entry[d*i + j];
+			acpi_printk(KERN_LOG_DEBUG, " %d", val);
+		}
+		acpi_printk(KERN_LOG_DEBUG, "\n");
+	}
 	for (i = 0; i < d; i++) {
 		for (j = 0; j < d; j++)  {
 			u8 val = slit->entry[d*i + j];

Re: [PATCH 3/5] pci: using pci_printk

[Alex Chiang]

* Alexey Dobriyan <adobriyan@gmail.com>:
> On Tue, Sep 16, 2008 at 01:52:52AM -0700, Yinghai Lu wrote:
> > --- linux-2.6.orig/drivers/pci/probe.c
> > +++ linux-2.6/drivers/pci/probe.c
> > @@ -304,7 +304,7 @@ static int __pci_read_base(struct pci_de
> 
> > -			printk(KERN_DEBUG "PCI: %s reg %x 64bit mmio: [%llx, %llx]\n",
> > +			pci_printk(KERN_LOG_DEBUG, KERN_DEBUG "PCI: %s reg %x 64bit mmio: [%llx, %llx]\n",
> 				   ^^^^^^^^^^^^^^^^^^^^^^^^^^
> Brilliant, simply brilliant!

Yeah, that's ugly.

> Printk haters club is definitely creative, no questions.

Bjorn might have some useful advice here.

Also, didn't we recently get all the PCI printk output to
resemble what lspci shows us?

/ac