From: Avi Kivity <avi@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: kvm@vger.kernel.org, Avi Kivity <avi@qumranet.com>
Subject: [PATCH 05/39] KVM: Simplify exception entries by using __ASM_SIZE and _ASM_PTR
Date: Thu, 25 Sep 2008 14:54:37 +0300 [thread overview]
Message-ID: <1222343711-12508-6-git-send-email-avi@redhat.com> (raw)
In-Reply-To: <1222343711-12508-1-git-send-email-avi@redhat.com>
From: Avi Kivity <avi@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
---
include/asm-x86/kvm_host.h | 13 ++-----------
1 files changed, 2 insertions(+), 11 deletions(-)
diff --git a/include/asm-x86/kvm_host.h b/include/asm-x86/kvm_host.h
index 1161af1..982b6b2 100644
--- a/include/asm-x86/kvm_host.h
+++ b/include/asm-x86/kvm_host.h
@@ -734,15 +734,6 @@ enum {
TASK_SWITCH_GATE = 3,
};
-
-#ifdef CONFIG_64BIT
-# define KVM_EX_ENTRY ".quad"
-# define KVM_EX_PUSH "pushq"
-#else
-# define KVM_EX_ENTRY ".long"
-# define KVM_EX_PUSH "pushl"
-#endif
-
/*
* Hardware virtualization extension instructions may fault if a
* reboot turns off virtualization while processes are running.
@@ -754,11 +745,11 @@ asmlinkage void kvm_handle_fault_on_reboot(void);
"666: " insn "\n\t" \
".pushsection .fixup, \"ax\" \n" \
"667: \n\t" \
- KVM_EX_PUSH " $666b \n\t" \
+ __ASM_SIZE(push) " $666b \n\t" \
"jmp kvm_handle_fault_on_reboot \n\t" \
".popsection \n\t" \
".pushsection __ex_table, \"a\" \n\t" \
- KVM_EX_ENTRY " 666b, 667b \n\t" \
+ _ASM_PTR " 666b, 667b \n\t" \
".popsection"
#define KVM_ARCH_WANT_MMU_NOTIFIER
--
1.6.0.1
next prev parent reply other threads:[~2008-09-25 11:58 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-25 11:54 [PATCH 00/39] KVM Updates for 2.6.28 merge window (part 2 of 3) Avi Kivity
2008-09-25 11:54 ` [PATCH 01/39] KVM: VMX: Clean up magic number 0x66 in init_rmode_tss Avi Kivity
2008-09-25 11:54 ` [PATCH 02/39] KVM: remove unused field from the assigned dev struct Avi Kivity
2008-09-25 11:54 ` [PATCH 03/39] KVM: set debug registers after "schedulable" section Avi Kivity
2008-09-25 11:54 ` [PATCH 04/39] KVM: VMX: Use interrupt queue for !irqchip_in_kernel Avi Kivity
2008-09-25 11:54 ` Avi Kivity [this message]
2008-09-25 11:54 ` [PATCH 06/39] KVM: fix i8259 reset irq acking Avi Kivity
2008-09-25 11:54 ` [PATCH 07/39] KVM: Handle spurious acks for PIT interrupts Avi Kivity
2008-09-25 11:54 ` [PATCH 08/39] KVM: Device assignment: Check for privileges before assigning irq Avi Kivity
2008-09-25 11:54 ` [PATCH 09/39] KVM: VMX: Add Guest State Validity Checks Avi Kivity
2008-09-25 11:54 ` [PATCH 10/39] KVM: VMX: Add module parameter and emulation flag Avi Kivity
2008-09-25 11:54 ` [PATCH 11/39] KVM: VMX: Add invalid guest state handler Avi Kivity
2008-09-25 11:54 ` [PATCH 12/39] KVM: VMX: Modify mode switching and vmentry functions Avi Kivity
2008-09-25 11:54 ` [PATCH 13/39] KVM: SVM: Fix typo Avi Kivity
2008-09-25 11:54 ` [PATCH 14/39] KVM: Use kvm_set_irq to inject interrupts Avi Kivity
2008-09-25 11:54 ` [PATCH 15/39] KVM: make irq ack notifier functions static Avi Kivity
2008-09-25 11:54 ` [PATCH 16/39] KVM: ia64: add a dummy irq ack notification Avi Kivity
2008-09-25 11:54 ` [PATCH 17/39] KVM: VMX: Change cs reset state to be a data segment Avi Kivity
2008-09-25 11:54 ` [PATCH 18/39] KVM: VMX: Change segment dpl at reset to 3 Avi Kivity
2008-09-25 11:54 ` [PATCH 19/39] KVM: Load real mode segments correctly Avi Kivity
2008-09-25 11:54 ` [PATCH 20/39] KVM: x86 emulator: remove duplicate SrcImm Avi Kivity
2008-09-25 11:54 ` [PATCH 21/39] KVM: x86 emulator: remove bad ByteOp specifier from NEG descriptor Avi Kivity
2008-09-25 11:54 ` [PATCH 22/39] KVM: MMU: Move SHADOW_PT_INDEX to mmu.c Avi Kivity
2008-09-25 11:54 ` [PATCH 23/39] KVM: MMU: Unify direct map 4K and large page paths Avi Kivity
2008-09-25 11:54 ` [PATCH 24/39] KVM: ia64: Enable virtio driver for ia64 in Kconfig Avi Kivity
2008-09-25 11:54 ` [PATCH 25/39] KVM: MMU: Infer shadow root level in direct_map() Avi Kivity
2008-09-25 11:54 ` [PATCH 26/39] KVM: MMU: Add generic shadow walker Avi Kivity
2008-09-25 11:54 ` [PATCH 27/39] KVM: MMU: Convert direct maps to use the " Avi Kivity
2008-09-25 11:55 ` [PATCH 28/39] KVM: MMU: Convert the paging mode shadow walk to use the generic walker Avi Kivity
2008-09-25 11:55 ` [PATCH 29/39] KVM: Allocate guest memory as MAP_PRIVATE, not MAP_SHARED Avi Kivity
2008-09-25 11:55 ` [PATCH 30/39] KVM: Don't call get_user_pages(.force = 1) Avi Kivity
2008-09-25 11:55 ` [PATCH 31/39] KVM: x86 emulator: Add mov r, imm instructions (opcodes 0xb0-0xbf) Avi Kivity
2008-09-25 11:55 ` [PATCH 32/39] KVM: MMU: Account for npt/ept/realmode page faults Avi Kivity
2008-09-25 11:55 ` [PATCH 33/39] KVM: MMU: Add locking around kvm_mmu_slot_remove_write_access() Avi Kivity
2008-09-25 11:55 ` [PATCH 34/39] KVM: MMU: Flush tlbs after clearing write permission when accessing dirty log Avi Kivity
2008-09-25 11:55 ` [PATCH 35/39] KVM: MMU: Fix setting the accessed bit on non-speculative sptes Avi Kivity
2008-09-25 11:55 ` [PATCH 36/39] KVM: SVM: No need to unprotect memory during event injection when using npt Avi Kivity
2008-09-25 11:55 ` [PATCH 37/39] KVM: add MC5_MISC msr read support Avi Kivity
2008-09-25 11:55 ` [PATCH 38/39] KVM: s390: Make facility bits future-proof Avi Kivity
2008-09-25 11:55 ` [PATCH 39/39] KVM: s390: change help text of guest Kconfig Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1222343711-12508-6-git-send-email-avi@redhat.com \
--to=avi@redhat.com \
--cc=avi@qumranet.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox