From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Samuel Ortiz <sameo@openedhand.com>, Liam Girdwood <lrg@kernel.org>
Cc: linux-kernel@vger.kernel.org,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 04/13] mfd: Add WM8350 PMU register definitions
Date: Mon, 6 Oct 2008 13:37:59 +0100 [thread overview]
Message-ID: <1223296688-9960-4-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1223296688-9960-3-git-send-email-broonie@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
include/linux/mfd/wm8350/supply.h | 105 +++++++++++++++++++++++++++++++++++++
1 files changed, 105 insertions(+), 0 deletions(-)
create mode 100644 include/linux/mfd/wm8350/supply.h
diff --git a/include/linux/mfd/wm8350/supply.h b/include/linux/mfd/wm8350/supply.h
new file mode 100644
index 0000000..f1d4317
--- /dev/null
+++ b/include/linux/mfd/wm8350/supply.h
@@ -0,0 +1,105 @@
+/*
+ * supply.h -- Power Supply Driver for Wolfson WM8350 PMIC
+ *
+ * Copyright 2007 Wolfson Microelectronics PLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __LINUX_MFD_WM8350_SUPPLY_H_
+#define __LINUX_MFD_WM8350_SUPPLY_H_
+
+/*
+ * Charger registers
+ */
+#define WM8350_BATTERY_CHARGER_CONTROL_1 0xA8
+#define WM8350_BATTERY_CHARGER_CONTROL_2 0xA9
+#define WM8350_BATTERY_CHARGER_CONTROL_3 0xAA
+
+/*
+ * R168 (0xA8) - Battery Charger Control 1
+ */
+#define WM8350_CHG_ENA_R168 0x8000
+#define WM8350_CHG_THR 0x2000
+#define WM8350_CHG_EOC_SEL_MASK 0x1C00
+#define WM8350_CHG_TRICKLE_TEMP_CHOKE 0x0200
+#define WM8350_CHG_TRICKLE_USB_CHOKE 0x0100
+#define WM8350_CHG_RECOVER_T 0x0080
+#define WM8350_CHG_END_ACT 0x0040
+#define WM8350_CHG_FAST 0x0020
+#define WM8350_CHG_FAST_USB_THROTTLE 0x0010
+#define WM8350_CHG_NTC_MON 0x0008
+#define WM8350_CHG_BATT_HOT_MON 0x0004
+#define WM8350_CHG_BATT_COLD_MON 0x0002
+#define WM8350_CHG_CHIP_TEMP_MON 0x0001
+
+/*
+ * R169 (0xA9) - Battery Charger Control 2
+ */
+#define WM8350_CHG_ACTIVE 0x8000
+#define WM8350_CHG_PAUSE 0x4000
+#define WM8350_CHG_STS_MASK 0x3000
+#define WM8350_CHG_TIME_MASK 0x0F00
+#define WM8350_CHG_MASK_WALL_FB 0x0080
+#define WM8350_CHG_TRICKLE_SEL 0x0040
+#define WM8350_CHG_VSEL_MASK 0x0030
+#define WM8350_CHG_ISEL_MASK 0x000F
+#define WM8350_CHG_STS_OFF 0x0000
+#define WM8350_CHG_STS_TRICKLE 0x1000
+#define WM8350_CHG_STS_FAST 0x2000
+
+/*
+ * R170 (0xAA) - Battery Charger Control 3
+ */
+#define WM8350_CHG_THROTTLE_T_MASK 0x0060
+#define WM8350_CHG_SMART 0x0010
+#define WM8350_CHG_TIMER_ADJT_MASK 0x000F
+
+/*
+ * Charger Interrupts
+ */
+#define WM8350_IRQ_CHG_BAT_HOT 0
+#define WM8350_IRQ_CHG_BAT_COLD 1
+#define WM8350_IRQ_CHG_BAT_FAIL 2
+#define WM8350_IRQ_CHG_TO 3
+#define WM8350_IRQ_CHG_END 4
+#define WM8350_IRQ_CHG_START 5
+#define WM8350_IRQ_CHG_FAST_RDY 6
+#define WM8350_IRQ_CHG_VBATT_LT_3P9 10
+#define WM8350_IRQ_CHG_VBATT_LT_3P1 11
+#define WM8350_IRQ_CHG_VBATT_LT_2P85 12
+
+/*
+ * Charger Policy
+ */
+#define WM8350_CHG_TRICKLE_50mA (0 << 6)
+#define WM8350_CHG_TRICKLE_100mA (1 << 6)
+#define WM8350_CHG_4_05V (0 << 4)
+#define WM8350_CHG_4_10V (1 << 4)
+#define WM8350_CHG_4_15V (2 << 4)
+#define WM8350_CHG_4_20V (3 << 4)
+#define WM8350_CHG_FAST_LIMIT_mA(x) ((x / 50) & 0xf)
+#define WM8350_CHG_EOC_mA(x) (((x - 10) & 0x7) << 10)
+#define WM8350_CHG_TRICKLE_3_1V (0 << 13)
+#define WM8350_CHG_TRICKLE_3_9V (1 << 13)
+
+/*
+ * Supply Registers.
+ */
+#define WM8350_USB_VOLTAGE_READBACK 0x9C
+#define WM8350_LINE_VOLTAGE_READBACK 0x9D
+#define WM8350_BATT_VOLTAGE_READBACK 0x9E
+
+/*
+ * Supply Interrupts.
+ */
+#define WM8350_IRQ_USB_LIMIT 15
+#define WM8350_IRQ_EXT_USB_FB 36
+#define WM8350_IRQ_EXT_WALL_FB 37
+#define WM8350_IRQ_EXT_BAT_FB 38
+
+#endif
--
1.5.6.5
next prev parent reply other threads:[~2008-10-06 12:38 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-06 12:32 [PATCH 0/13] WM8350 support Mark Brown
2008-10-06 12:37 ` [PATCH 01/13] mfd: Add WM8350 audio register definitions Mark Brown
2008-10-06 12:37 ` [PATCH 02/13] mfd: Add WM8350 GPIO " Mark Brown
2008-10-06 12:37 ` [PATCH 03/13] mfd: Add WM8350 PMIC " Mark Brown
2008-10-06 12:37 ` Mark Brown [this message]
2008-10-06 12:38 ` [PATCH 05/13] mfd: Add WM8350 comparator " Mark Brown
2008-10-06 12:38 ` [PATCH 06/13] mfd: Add WM8350 RTC " Mark Brown
2008-10-06 12:38 ` [PATCH 07/13] mfd: Add WM8350 watchdog " Mark Brown
2008-10-06 12:38 ` [PATCH 08/13] mfd: Core support for the WM8350 AudioPlus PMIC Mark Brown
2008-10-06 12:38 ` [PATCH 09/13] mfd: Add I2C control support for WM8350 Mark Brown
2008-10-06 12:38 ` [PATCH 10/13] mfd: Add GPIO pin configuration " Mark Brown
2008-10-06 12:38 ` [PATCH 11/13] mfd: Add initialisation callback " Mark Brown
2008-10-06 12:38 ` [PATCH 12/13] mfd: Add WM8350 interrupt support Mark Brown
2008-10-06 12:38 ` [PATCH 13/13] regulator: Add WM8350 regulator support Mark Brown
2008-10-09 12:05 ` [PATCH 08/13] mfd: Core support for the WM8350 AudioPlus PMIC Liam Girdwood
2008-10-09 12:53 ` Mark Brown
2008-10-10 14:24 ` [PATCH 0/13] WM8350 support Liam Girdwood
2008-10-10 14:31 ` Samuel Ortiz
2008-10-10 14:38 ` Mark Brown
2008-10-10 14:45 ` Liam Girdwood
2008-10-10 14:58 ` [PATCH 01/14] mfd: Add WM8350 audio register definitions Mark Brown
2008-10-10 14:58 ` [PATCH 02/14] mfd: Add WM8350 GPIO " Mark Brown
2008-10-10 14:58 ` [PATCH 03/14] mfd: Add WM8350 PMIC " Mark Brown
2008-10-10 14:58 ` [PATCH 04/14] mfd: Add WM8350 PMU " Mark Brown
2008-10-10 14:58 ` [PATCH 05/14] mfd: Add WM8350 comparator " Mark Brown
2008-10-10 14:58 ` [PATCH 06/14] mfd: Add WM8350 RTC " Mark Brown
2008-10-10 14:58 ` [PATCH 07/14] mfd: Add WM8350 watchdog " Mark Brown
2008-10-10 14:58 ` [PATCH 08/14] mfd: Core support for the WM8350 AudioPlus PMIC Mark Brown
2008-10-10 14:58 ` [PATCH 09/14] mfd: Add I2C control support for WM8350 Mark Brown
2008-10-10 14:58 ` [PATCH 10/14] mfd: Add GPIO pin configuration " Mark Brown
2008-10-10 14:58 ` [PATCH 11/14] mfd: Add initialisation callback " Mark Brown
2008-10-10 14:58 ` [PATCH 12/14] mfd: Add WM8350 interrupt support Mark Brown
2008-10-10 14:58 ` [PATCH 13/14] regulator: Add WM8350 regulator support Mark Brown
2008-10-10 14:58 ` [PATCH 14/14] mfd: Add WM8350 subdevice registration helper Mark Brown
2008-10-11 14:18 ` Samuel Ortiz
2008-10-11 15:38 ` Mark Brown
2008-10-11 14:09 ` [PATCH 10/14] mfd: Add GPIO pin configuration support for WM8350 Samuel Ortiz
2008-10-11 14:46 ` Mark Brown
2008-10-11 14:23 ` [PATCH 0/13] WM8350 support Samuel Ortiz
2008-10-10 14:48 ` Samuel Ortiz
2008-10-10 14:38 ` Liam Girdwood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1223296688-9960-4-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@kernel.org \
--cc=sameo@openedhand.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox