public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
To: "Serge E. Hallyn" <serue@us.ibm.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>,
	linux-kernel@vger.kernel.org, James Morris <jmorris@namei.org>,
	David Safford <safford@watson.ibm.com>,
	Serge Hallyn <serue@linux.vnet.ibm.com>
Subject: Re: [PATCH 1/3] integrity: TPM internel kernel interface
Date: Fri, 24 Oct 2008 18:16:03 -0200	[thread overview]
Message-ID: <1224879363.2778.22.camel@blackbox> (raw)
In-Reply-To: <20081022144944.GC21612@us.ibm.com>

Serge,

On Wed, 2008-10-22 at 09:49 -0500, Serge E. Hallyn wrote:
> Quoting Rajiv Andrade (srajiv@linux.vnet.ibm.com):
> > On Tue, 2008-10-14 at 17:23 -0500, Serge E. Hallyn wrote:
> > > Quoting Mimi Zohar (zohar@linux.vnet.ibm.com):
> > > > The internal TPM kernel interface did not protect itself from
> > > > the removal of the TPM driver, while being used.  We continue
> > > > to protect the tpm_chip_list using the driver_lock as before,
> > > > and are using an rcu lock to protect readers. The internal TPM
> > > 
> > > I still would like to see this spelled out somewhere - correct me
> > > if I'm wrong but none of the patches sent so far have this spelled
> > > out in in-line comments, do they?
> > > 
> > > It does look sane:
> > > 
> > > 	1. writes to tpm_chip_list are protected by driver_lock
> > > 	2. readers of the list are protected by rcu
> > > 	3. chips which are read from the tpm_chip_list, if they
> > > 	   are used outside of the rcu_read_lock(), are pinned
> > > 	   using get_device(chip->dev) before releasing the
> > > 	   rcu_read_lock.
> > > 
> > > Like I say it looks sane, but something like the above summary
> > > could stand to be in a comment on top of tpm.c or something.
> > > 
> > No problem, I'll submit a patch containing a proper comment section to
> > be applied on top of these, maybe after they get accepted.
> 
> Great, thanks.
> 
> > > > kernel interface now protects itself from the driver being
> > > > removed by incrementing the module reference count.
> > > > 
> > > > Resubmitting integrity-tpm-internal-kernel-interface.patch, which
> > > > was previously Signed-off-by Kylene Hall.
> > > > Updated per feedback:
> > > > 
> > > > Adds the following support:
> > > >   - make internal kernel interface to transmit TPM commands global
> > > >   - adds reading a pcr value
> > > >   - adds extending a pcr value
> > > >   - adds lookup the tpm_chip for given chip number and type
> > > > 
> > > > Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
> > > > Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
> > > 
> > > Now there are other, existing callers of tpm_transmit.  Are they
> > > all protected by sysfs pinning the kobject and thereby the device,
> > > for the duration of the call?
> > > 
> > 
> > They aren't called through sysfs, but are still protected. These new
> > functions get chip data consistently by using rcu_read. Then, after
> > computing what's intended to be written back to the chip, tpm_transmit
> > sends the new data while using tpm_mutex, so both operations are
> > performed without the risk of a race condition.
> 
> Can you show me where the refcount for dev is incremented (under the
> rcu_read_lock), either in sysfs code or tpm code?  I'm not finding
> it, but it may just be done in some subtle way that I'm glossing over.
> 

The refcount is incremented/decremented in tpm_register_hardware() and
tpm_remove_hardware() for tpm module, and tpm_open() and tpm_release()
for tpm_tis module, all inside tpm.c. The last two are referenced in
tpm_tis.c:

tpm_tis.c

static const struct file_operations tis_ops = {
        .owner = THIS_MODULE,
        .llseek = no_llseek,
        .open = tpm_open,
        .read = tpm_read,
        .write = tpm_write,
        .release = tpm_release,
};

thanks,

> thanks,
> -serge
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
-- 
Rajiv Andrade <srajiv@br.ibm.com>
Security Development
IBM Linux Technology Center



  reply	other threads:[~2008-10-24 20:16 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-10-13 17:17 [PATCH 0/3] integrity Mimi Zohar
2008-10-13 17:17 ` [PATCH 1/3] integrity: TPM internel kernel interface Mimi Zohar
2008-10-14 22:23   ` Serge E. Hallyn
2008-10-22 12:47     ` Rajiv Andrade
2008-10-22 14:49       ` Serge E. Hallyn
2008-10-24 20:16         ` Rajiv Andrade [this message]
2008-10-24 20:31           ` Serge E. Hallyn
2008-10-13 17:17 ` [PATCH 2/3] integrity: Linux Integrity Module(LIM) Mimi Zohar
2008-10-14 13:28   ` Christoph Hellwig
2008-10-14 15:27     ` david safford
2008-10-14 15:53       ` Serge E. Hallyn
2008-10-14 17:06         ` david safford
2008-10-20 15:12       ` Serge E. Hallyn
2008-10-24 14:47     ` Mimi Zohar
2008-10-31 16:22     ` Serge E. Hallyn
2008-10-31 16:51     ` Dave Hansen
2008-10-31 19:48       ` Mimi Zohar
2008-10-14 23:27   ` Serge E. Hallyn
2008-10-31 16:40   ` Dave Hansen
2008-10-31 19:35     ` Mimi Zohar
2008-10-31 21:02       ` Dave Hansen
2008-11-02 22:57     ` Serge E. Hallyn
2008-10-13 17:17 ` [PATCH 3/3] integrity: IMA as an integrity service provider Mimi Zohar
2008-10-15  3:32   ` Serge E. Hallyn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1224879363.2778.22.camel@blackbox \
    --to=srajiv@linux.vnet.ibm.com \
    --cc=jmorris@namei.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=safford@watson.ibm.com \
    --cc=serue@linux.vnet.ibm.com \
    --cc=serue@us.ibm.com \
    --cc=zohar@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox