From: Greg KH <greg@kroah.com>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@suse.de>,
"John W. Linville" <linville@tuxdriver.com>
Subject: [PATCH 36/49] Staging: at76_usb: fix up all remaining checkpatch.pl warnings
Date: Wed, 29 Oct 2008 15:40:03 -0700 [thread overview]
Message-ID: <1225320016-21803-36-git-send-email-greg@kroah.com> (raw)
In-Reply-To: <20081029223832.GC21657@kroah.com>
From: Greg Kroah-Hartman <gregkh@suse.de>
It's now a "clean" driver.
Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/staging/at76_usb/at76_usb.c | 176 +++++++++++++++++++----------------
1 files changed, 94 insertions(+), 82 deletions(-)
diff --git a/drivers/staging/at76_usb/at76_usb.c b/drivers/staging/at76_usb/at76_usb.c
index b8a056d..5591b17 100644
--- a/drivers/staging/at76_usb/at76_usb.c
+++ b/drivers/staging/at76_usb/at76_usb.c
@@ -91,18 +91,18 @@
/* Use our own dbg macro */
#define at76_dbg(bits, format, arg...) \
- do { \
- if (at76_debug & (bits)) \
+do { \
+ if (at76_debug & (bits)) \
printk(KERN_DEBUG DRIVER_NAME ": " format "\n" , ## arg); \
- } while (0)
+} while (0)
#define at76_dbg_dump(bits, buf, len, format, arg...) \
- do { \
- if (at76_debug & (bits)) { \
+do { \
+ if (at76_debug & (bits)) { \
printk(KERN_DEBUG DRIVER_NAME ": " format "\n" , ## arg); \
- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len); \
+ print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len); \
} \
- } while (0)
+} while (0)
static int at76_debug = DBG_DEFAULTS;
@@ -300,22 +300,30 @@ struct dfu_status {
static inline int at76_is_intersil(enum board_type board)
{
- return (board == BOARD_503_ISL3861 || board == BOARD_503_ISL3863);
+ if (board == BOARD_503_ISL3861 || board == BOARD_503_ISL3863)
+ return 1;
+ return 0;
}
static inline int at76_is_503rfmd(enum board_type board)
{
- return (board == BOARD_503 || board == BOARD_503_ACC);
+ if (board == BOARD_503 || board == BOARD_503_ACC)
+ return 1;
+ return 0;
}
static inline int at76_is_505(enum board_type board)
{
- return (board == BOARD_505 || BOARD_505_2958);
+ if (board == BOARD_505 || board == BOARD_505_2958)
+ return 1;
+ return 0;
}
static inline int at76_is_505a(enum board_type board)
{
- return (board == BOARD_505A || board == BOARD_505AMX);
+ if (board == BOARD_505A || board == BOARD_505AMX)
+ return 1;
+ return 0;
}
/* Load a block of the first (internal) part of the firmware */
@@ -1054,20 +1062,23 @@ static void at76_dump_mib_mac_encryption(struct at76_priv *priv)
int i;
int ret;
/*int key_len;*/
- struct mib_mac_encryption *m = kmalloc(sizeof(struct mib_mac_encryption), GFP_KERNEL);
+ struct mib_mac_encryption *m;
+ m = kmalloc(sizeof(struct mib_mac_encryption), GFP_KERNEL);
if (!m)
return;
ret = at76_get_mib(priv->udev, MIB_MAC_ENCRYPTION, m,
sizeof(struct mib_mac_encryption));
if (ret < 0) {
- printk(KERN_ERR "%s: at76_get_mib (MAC_ENCRYPTION) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ dev_err(&priv->udev->dev,
+ "%s: at76_get_mib (MAC_ENCRYPTION) failed: %d\n",
+ wiphy_name(priv->hw->wiphy), ret);
goto exit;
}
- at76_dbg(DBG_MIB, "%s: MIB MAC_ENCRYPTION: tkip_bssid %s priv_invoked %u "
+ at76_dbg(DBG_MIB,
+ "%s: MIB MAC_ENCRYPTION: tkip_bssid %s priv_invoked %u "
"ciph_key_id %u grp_key_id %u excl_unencr %u "
"ckip_key_perm %u wep_icv_err %u wep_excluded %u",
wiphy_name(priv->hw->wiphy), mac2str(m->tkip_bssid),
@@ -1083,7 +1094,8 @@ static void at76_dump_mib_mac_encryption(struct at76_priv *priv)
for (i = 0; i < CIPHER_KEYS; i++)
at76_dbg(DBG_MIB, "%s: MIB MAC_ENCRYPTION: key %d: %s",
wiphy_name(priv->hw->wiphy), i,
- hex2str(m->cipher_default_keyvalue[i], CIPHER_KEY_LEN));
+ hex2str(m->cipher_default_keyvalue[i],
+ CIPHER_KEY_LEN));
exit:
kfree(m);
}
@@ -1622,10 +1634,12 @@ static void at76_rx_tasklet(unsigned long param)
skb_trim(priv->rx_skb, le16_to_cpu(buf->wlength) + AT76_RX_HDRLEN);
at76_dbg_dump(DBG_RX_DATA, &priv->rx_skb->data[AT76_RX_HDRLEN],
- priv->rx_skb->len, "RX: len=%d", (int)(priv->rx_skb->len - AT76_RX_HDRLEN));
+ priv->rx_skb->len, "RX: len=%d",
+ (int)(priv->rx_skb->len - AT76_RX_HDRLEN));
rx_status.signal = buf->rssi;
- rx_status.rate_idx = buf->rx_rate; /* FIXME: is rate_idx still present in structure? */
+ /* FIXME: is rate_idx still present in structure? */
+ rx_status.rate_idx = buf->rx_rate;
rx_status.flag |= RX_FLAG_DECRYPTED;
rx_status.flag |= RX_FLAG_IV_STRIPPED;
@@ -1726,7 +1740,9 @@ static void at76_mac80211_tx_callback(struct urb *urb)
switch (urb->status) {
case 0:
/* success */
- info->flags |= IEEE80211_TX_STAT_ACK; /* FIXME: is the frame really ACKed when tx_callback is called ? */
+ /* FIXME:
+ * is the frame really ACKed when tx_callback is called ? */
+ info->flags |= IEEE80211_TX_STAT_ACK;
break;
case -ENOENT:
case -ECONNRESET:
@@ -1780,8 +1796,10 @@ static int at76_mac80211_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
tx_buffer->tx_rate = ieee80211_get_tx_rate(hw, info)->hw_value;
if (FIRMWARE_IS_WPA(priv->fw_version) && info->control.hw_key) {
tx_buffer->key_id = (info->control.hw_key->keyidx);
- tx_buffer->cipher_type = priv->keys[info->control.hw_key->keyidx].cipher;
- tx_buffer->cipher_length = priv->keys[info->control.hw_key->keyidx].keylen;
+ tx_buffer->cipher_type =
+ priv->keys[info->control.hw_key->keyidx].cipher;
+ tx_buffer->cipher_length =
+ priv->keys[info->control.hw_key->keyidx].keylen;
tx_buffer->reserved = 0;
} else {
tx_buffer->key_id = 0;
@@ -2184,41 +2202,40 @@ static int at76_set_key_newfw(struct ieee80211_hw *hw, enum set_key_cmd cmd,
memcpy(priv->mib_buf.data.data, key->key, key->keylen);
switch (key->alg) {
- case ALG_WEP:
- if (key->keylen == 5) {
- priv->keys[key->keyidx].cipher =
- CIPHER_WEP64;
- priv->keys[key->keyidx].keylen = 8;
- } else if (key->keylen == 13) {
- priv->keys[key->keyidx].cipher =
- CIPHER_WEP128;
- /* Firmware needs this */
- priv->keys[key->keyidx].keylen = 8;
- } else {
- ret = -EOPNOTSUPP;
- goto exit;
- };
- break;
- case ALG_TKIP:
- key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
- priv->keys[key->keyidx].cipher = CIPHER_TKIP;
- priv->keys[key->keyidx].keylen = 12;
- break;
-
- case ALG_CCMP:
- if (!at76_is_505a(priv->board_type)) {
- ret = -EOPNOTSUPP;
- goto exit;
- };
- key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
- priv->keys[key->keyidx].cipher = CIPHER_CCMP;
- priv->keys[key->keyidx].keylen = 16;
- break;
+ case ALG_WEP:
+ if (key->keylen == 5) {
+ priv->keys[key->keyidx].cipher =
+ CIPHER_WEP64;
+ priv->keys[key->keyidx].keylen = 8;
+ } else if (key->keylen == 13) {
+ priv->keys[key->keyidx].cipher =
+ CIPHER_WEP128;
+ /* Firmware needs this */
+ priv->keys[key->keyidx].keylen = 8;
+ } else {
+ ret = -EOPNOTSUPP;
+ goto exit;
+ };
+ break;
+ case ALG_TKIP:
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+ priv->keys[key->keyidx].cipher = CIPHER_TKIP;
+ priv->keys[key->keyidx].keylen = 12;
+ break;
- default:
+ case ALG_CCMP:
+ if (!at76_is_505a(priv->board_type)) {
ret = -EOPNOTSUPP;
goto exit;
+ };
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+ priv->keys[key->keyidx].cipher = CIPHER_CCMP;
+ priv->keys[key->keyidx].keylen = 16;
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ goto exit;
};
priv->mib_buf.data.data[38] = priv->keys[key->keyidx].cipher;
@@ -2261,8 +2278,8 @@ static int at76_set_key_newfw(struct ieee80211_hw *hw, enum set_key_cmd cmd,
priv->mib_buf.data.data[1] = priv->default_pairwise_key;
priv->mib_buf.data.data[2] = priv->default_group_key;
- if ((ret = at76_set_mib(priv, &priv->mib_buf)) !=
- CMD_STATUS_COMPLETE)
+ ret = at76_set_mib(priv, &priv->mib_buf);
+ if (ret != CMD_STATUS_COMPLETE)
goto exit;
/* second block of settings */
@@ -2273,8 +2290,8 @@ static int at76_set_key_newfw(struct ieee80211_hw *hw, enum set_key_cmd cmd,
priv->mib_buf.data.data[1] = 0; /* wep_encryption_type */
priv->mib_buf.data.data[2] = 0; /* ckip_key_permutation */
- if ((ret = at76_set_mib(priv, &priv->mib_buf)) !=
- CMD_STATUS_COMPLETE)
+ ret = at76_set_mib(priv, &priv->mib_buf);
+ if (ret != CMD_STATUS_COMPLETE)
goto exit;
ret = 0;
};
@@ -2290,8 +2307,6 @@ static int at76_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
{
struct at76_priv *priv = hw->priv;
- // int i;
-
at76_dbg(DBG_MAC80211, "%s(): cmd %d key->alg %d key->keyidx %d "
"key->keylen %d",
__func__, cmd, key->alg, key->keyidx, key->keylen);
@@ -2445,6 +2460,7 @@ static struct ieee80211_supported_band at76_supported_band = {
static int at76_init_new_device(struct at76_priv *priv,
struct usb_interface *interface)
{
+ struct device *dev = &interface->dev;
int ret;
/* set up the endpoint information */
@@ -2460,8 +2476,7 @@ static int at76_init_new_device(struct at76_priv *priv,
/* MAC address */
ret = at76_get_hw_config(priv);
if (ret < 0) {
- dev_printk(KERN_ERR, &interface->dev,
- "cannot get MAC address\n");
+ dev_err(dev, "cannot get MAC address\n");
goto exit;
}
@@ -2500,22 +2515,21 @@ static int at76_init_new_device(struct at76_priv *priv,
ret = ieee80211_register_hw(priv->hw);
if (ret) {
- printk(KERN_ERR "cannot register mac80211 hw (status %d)!\n",
- ret);
+ dev_err(dev, "cannot register mac80211 hw (status %d)!\n", ret);
goto exit;
}
priv->mac80211_registered = 1;
- printk(KERN_INFO "%s: USB %s, MAC %s, firmware %d.%d.%d-%d\n",
- wiphy_name(priv->hw->wiphy),
- interface->dev.bus_id, mac2str(priv->mac_addr),
- priv->fw_version.major, priv->fw_version.minor,
- priv->fw_version.patch, priv->fw_version.build);
- printk(KERN_INFO "%s: regulatory domain 0x%02x: %s\n",
- wiphy_name(priv->hw->wiphy),
- priv->regulatory_domain, priv->domain->name);
- printk(KERN_INFO "%s: WPA support: ", wiphy_name(priv->hw->wiphy));
+ dev_info(dev, "%s: USB %s, MAC %s, firmware %d.%d.%d-%d\n",
+ wiphy_name(priv->hw->wiphy),
+ interface->dev.bus_id, mac2str(priv->mac_addr),
+ priv->fw_version.major, priv->fw_version.minor,
+ priv->fw_version.patch, priv->fw_version.build);
+ dev_info(dev, "%s: regulatory domain 0x%02x: %s\n",
+ wiphy_name(priv->hw->wiphy),
+ priv->regulatory_domain, priv->domain->name);
+ dev_info(dev, "%s: WPA support: ", wiphy_name(priv->hw->wiphy));
if (!FIRMWARE_IS_WPA(priv->fw_version))
printk("none\n");
else {
@@ -2596,8 +2610,8 @@ static int at76_probe(struct usb_interface *interface,
we get 204 with 2.4.23, Fiberline FL-WL240u (505A+RFMD2958) ??? */
if (op_mode == OPMODE_HW_CONFIG_MODE) {
- dev_printk(KERN_ERR, &interface->dev,
- "cannot handle a device in HW_CONFIG_MODE\n");
+ dev_err(&interface->dev,
+ "cannot handle a device in HW_CONFIG_MODE\n");
ret = -EBUSY;
goto error;
}
@@ -2605,13 +2619,12 @@ static int at76_probe(struct usb_interface *interface,
if (op_mode != OPMODE_NORMAL_NIC_WITH_FLASH
&& op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) {
/* download internal firmware part */
- dev_printk(KERN_DEBUG, &interface->dev,
- "downloading internal firmware\n");
+ dev_dbg(&interface->dev, "downloading internal firmware\n");
ret = at76_load_internal_fw(udev, fwe);
if (ret < 0) {
- dev_printk(KERN_ERR, &interface->dev,
- "error %d downloading internal firmware\n",
- ret);
+ dev_err(&interface->dev,
+ "error %d downloading internal firmware\n",
+ ret);
goto error;
}
usb_put_dev(udev);
@@ -2636,8 +2649,7 @@ static int at76_probe(struct usb_interface *interface,
need_ext_fw = 1;
if (need_ext_fw) {
- dev_printk(KERN_DEBUG, &interface->dev,
- "downloading external firmware\n");
+ dev_dbg(&interface->dev, "downloading external firmware\n");
ret = at76_load_external_fw(udev, fwe);
if (ret)
@@ -2646,8 +2658,8 @@ static int at76_probe(struct usb_interface *interface,
/* Re-check firmware version */
ret = at76_get_mib(udev, MIB_FW_VERSION, &fwv, sizeof(fwv));
if (ret < 0) {
- dev_printk(KERN_ERR, &interface->dev,
- "error %d getting firmware version\n", ret);
+ dev_err(&interface->dev,
+ "error %d getting firmware version\n", ret);
goto error;
}
}
--
1.6.0.2
next prev parent reply other threads:[~2008-10-29 22:57 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-29 22:38 [GIT PATCH] STAGING patches for 2.6-git Greg KH
2008-10-29 22:39 ` [PATCH 01/49] staging: correct dubious use of !x & y Greg KH
2008-10-29 22:39 ` [PATCH 02/49] Staging: make usbip depend on CONFIG_NET Greg KH
2008-10-29 22:39 ` [PATCH 03/49] Staging: w35und: make wb35_probe() and wb35_disconnect() funtions static Greg KH
2008-10-29 22:39 ` [PATCH 04/49] Staging: w35und: remove unused wb35_open() and wb35_close() functions Greg KH
2008-10-29 22:39 ` [PATCH 05/49] Staging: w35und: use msleep() and udelay() Greg KH
2008-10-29 22:39 ` [PATCH 06/49] Staging: w35und: remove the no-op pa_stall_execution macro Greg KH
2008-10-29 22:39 ` [PATCH 07/49] Staging: w35und: purb typedef removal Greg KH
2008-10-29 22:39 ` [PATCH 08/49] Staging: w35und: reg queue struct " Greg KH
2008-10-29 22:39 ` [PATCH 09/49] Staging: w35und: wb35reg " Greg KH
2008-10-29 22:39 ` [PATCH 10/49] Staging: w35und: padapter " Greg KH
2008-10-29 22:39 ` [PATCH 11/49] Staging: w35und: merge wblinux struct to adapter Greg KH
2008-10-29 22:39 ` [PATCH 12/49] Staging: w35und: wb35_probe() cleanup Greg KH
2008-10-29 22:39 ` [PATCH 13/49] Staging: w35und: remove usb_submit_urb wrapper function Greg KH
2008-10-29 23:09 ` Pavel Machek
2008-10-29 22:39 ` [PATCH 14/49] Staging: w35und: remove usb_alloc_urb " Greg KH
2008-10-29 23:10 ` Pavel Machek
2008-10-29 22:39 ` [PATCH 15/49] w35und: remove dead code from wbusb_f.h Greg KH
2008-10-29 22:39 ` [PATCH 16/49] Staging: w35und: remove true/false boolean macros Greg KH
2008-10-29 22:39 ` [PATCH 17/49] Staging: w35und: OS_MEMORY_ALLOC wrapper removal Greg KH
2008-10-29 22:39 ` [PATCH 18/49] Staging: w35und: usb_put_dev() is missing from wb35_disconnect() Greg KH
2008-10-29 22:39 ` [PATCH 19/49] Staging: w35und: remove macro magic from MLME_GetNextPacket() Greg KH
2008-10-29 22:39 ` [PATCH 20/49] Staging: w35und: plug memory leak in wbsoft_tx() Greg KH
2008-10-29 22:39 ` [PATCH 21/49] Staging: w35und: move supported band initialization out of wb35_probe() Greg KH
2008-10-29 22:39 ` [PATCH 22/49] Staging: wlan-ng: Remove PCI/PLX/PCMCIA files Greg KH
2008-10-29 22:39 ` [PATCH 23/49] Staging: wlan-ng: Update Help text to mention prism3 devices Greg KH
2008-10-29 22:39 ` [PATCH 24/49] Staging: wlan-ng: Delete PCI/PLX/PCMCIA-specific code Greg KH
2008-10-29 22:39 ` [PATCH 25/49] Staging: wlan-ng: Make wlan-ng use WEXT mode by default Greg KH
2008-10-29 22:39 ` [PATCH 26/49] Staging: wlan-ng: Eliminate more <2.6 kernel support Greg KH
2008-10-29 22:39 ` [PATCH 27/49] Staging: wlan-ng: Eliminate all backwards-compatibility for <2.6.13 kernels Greg KH
2008-10-29 22:39 ` [PATCH 28/49] Staging: wlan-ng: Eliminate a boatload of tertiaryAP-only code Greg KH
2008-10-29 22:39 ` [PATCH 29/49] Staging: wlan-ng: Remove AP-only code from MLME functions Greg KH
2008-10-29 22:39 ` [PATCH 30/49] Staging: wlan-ng: Get rid of the MTU tests in the rx conversion path Greg KH
2008-10-29 22:39 ` [PATCH 31/49] Staging: wlan-ng: Eliminate one more rx mtu test Greg KH
2008-10-29 22:39 ` [PATCH 32/49] Staging: wlan-ng: Eliminate local 'version.h' Greg KH
2008-10-29 22:40 ` [PATCH 33/49] Staging: wlan-ng: Eliminate usage of procfs Greg KH
2008-10-29 22:40 ` [PATCH 34/49] Staging: at76_usb: update drivers/staging/at76_usb w/ mac80211 port Greg KH
2008-10-29 22:40 ` [PATCH 35/49] Staging: at76_usb: remove compiler warnings Greg KH
2008-10-29 22:40 ` Greg KH [this message]
2008-10-29 22:40 ` [PATCH 37/49] Staging: poch: Block size bug fix Greg KH
2008-10-29 22:40 ` [PATCH 38/49] Staging: poch: Update TODO list Greg KH
2008-10-29 22:40 ` [PATCH 39/49] Staging: poch: Correct pages from bytes Greg KH
2008-10-29 22:40 ` [PATCH 40/49] Staging: poch: minor fixes Greg KH
2008-10-29 22:40 ` [PATCH 41/49] Staging: poch: Fix build warnings Greg KH
2008-10-29 22:40 ` [PATCH 42/49] Staging: poch: Rx control register init Greg KH
2008-10-29 22:40 ` [PATCH 43/49] Staging: poch: Fix user space protocol syncing Greg KH
2008-10-29 22:40 ` [PATCH 44/49] Staging: poch: Fine grained locking Greg KH
2008-10-29 22:40 ` [PATCH 45/49] Staging: sxg: remove typedefs Greg KH
2008-10-29 22:40 ` [PATCH 46/49] Staging: sxg: break the build in a cleaner way when !x86 Greg KH
2008-10-29 22:40 ` [PATCH 47/49] Staging: add agnx wireless driver Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1225320016-21803-36-git-send-email-greg@kroah.com \
--to=greg@kroah.com \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox