public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Bryan Wu <cooloney@kernel.org>
To: broonie@sirena.org.uk, tiwai@suse.de
Cc: alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
	Cliff Cai <cliff.cai@analog.com>, Bryan Wu <cooloney@kernel.org>
Subject: [PATCH 2/8] ASoC: AD1980 codec: add multi-channel function support
Date: Tue, 18 Nov 2008 16:18:16 +0800	[thread overview]
Message-ID: <1226996302-10234-3-git-send-email-cooloney@kernel.org> (raw)
In-Reply-To: <1226996302-10234-1-git-send-email-cooloney@kernel.org>

From: Cliff Cai <cliff.cai@analog.com>

We added multi-channel function to this codec driver and Blackfin ASoC driver as well.
It was tested on Blackfin hardware.

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 sound/soc/codecs/ad1980.c |   19 +++++++++++++++----
 1 files changed, 15 insertions(+), 4 deletions(-)

diff --git a/sound/soc/codecs/ad1980.c b/sound/soc/codecs/ad1980.c
index 1397b8e..410fed9 100644
--- a/sound/soc/codecs/ad1980.c
+++ b/sound/soc/codecs/ad1980.c
@@ -85,6 +85,9 @@ SOC_DOUBLE("Line HP Swap Switch", AC97_AD_MISC, 10, 5, 1, 0),
 SOC_DOUBLE("Surround Playback Volume", AC97_SURROUND_MASTER, 8, 0, 31, 1),
 SOC_DOUBLE("Surround Playback Switch", AC97_SURROUND_MASTER, 15, 7, 1, 1),
 
+SOC_DOUBLE("Center/LFE Playback Volume", AC97_CENTER_LFE_MASTER, 8, 0, 31, 1),
+SOC_DOUBLE("Center/LFE Playback Switch", AC97_CENTER_LFE_MASTER, 15, 7, 1, 1),
+
 SOC_ENUM("Capture Source", ad1980_cap_src),
 
 SOC_SINGLE("Mic Boost Switch", AC97_MIC, 6, 1, 0),
@@ -145,7 +148,7 @@ struct snd_soc_dai ad1980_dai = {
 	.playback = {
 		.stream_name = "Playback",
 		.channels_min = 2,
-		.channels_max = 2,
+		.channels_max = 6,
 		.rates = SNDRV_PCM_RATE_48000,
 		.formats = SNDRV_PCM_FMTBIT_S16_LE, },
 	.capture = {
@@ -192,6 +195,7 @@ static int ad1980_soc_probe(struct platform_device *pdev)
 	struct snd_soc_codec *codec;
 	int ret = 0;
 	u16 vendor_id2;
+	u16 ext_status;
 
 	printk(KERN_INFO "AD1980 SoC Audio Codec\n");
 
@@ -253,9 +257,16 @@ static int ad1980_soc_probe(struct platform_device *pdev)
 				"supported\n");
 	}
 
-	ac97_write(codec, AC97_MASTER, 0x0000); /* unmute line out volume */
-	ac97_write(codec, AC97_PCM, 0x0000);	/* unmute PCM out volume */
-	ac97_write(codec, AC97_REC_GAIN, 0x0000);/* unmute record volume */
+	/* unmute captures and playbacks volume */
+	ac97_write(codec, AC97_MASTER, 0x0000);
+	ac97_write(codec, AC97_PCM, 0x0000);
+	ac97_write(codec, AC97_REC_GAIN, 0x0000);
+	ac97_write(codec, AC97_CENTER_LFE_MASTER, 0x0000);
+	ac97_write(codec, AC97_SURROUND_MASTER, 0x0000);
+
+	/*power on LFE/CENTER/Surround DACs*/
+	ext_status = ac97_read(codec, AC97_EXTENDED_STATUS);
+	ac97_write(codec, AC97_EXTENDED_STATUS, ext_status&~0x3800);
 
 	ad1980_add_controls(codec);
 	ret = snd_soc_register_card(socdev);
-- 
1.5.6.3

  parent reply	other threads:[~2008-11-18  8:17 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-11-18  8:18 Bryan Wu
2008-11-18  8:18 ` [PATCH 1/8] ASoC: Blackfin: updates Kconfig for SPORT Bryan Wu
2008-11-18  8:18 ` Bryan Wu [this message]
2008-11-18  8:18 ` [PATCH 3/8] ASoC: Blackfin: add multi-channel function support Bryan Wu
2008-11-18  8:18 ` [PATCH 4/8] ASoC: Blackfin: fix bug - AD1980/1 SOC Audio driver fails to build in case MMAP support is turned off Bryan Wu
2008-11-18 11:53   ` [alsa-devel] " Mark Brown
2008-11-18  8:18 ` [PATCH 5/8] ASoC: Fix BUGS in Blackfin AC97 DAI Bryan Wu
2008-11-18 11:54   ` [alsa-devel] " Mark Brown
2008-11-18 11:58     ` Hennerich, Michael
2008-11-18  8:18 ` [PATCH 6/8] ASoC: Blackfin: do not force TWI bus for ssm2602 codec Bryan Wu
2008-11-18  8:18 ` [PATCH 7/8] ASoC: Blackfin: Simplify the MMAP_SUPPORT macros protected code Bryan Wu
2008-11-18  8:18 ` [PATCH 8/8] ASoC: Blackfin: always set a default value for that GPIO range Bryan Wu
2008-11-18 11:45 ` [alsa-devel] (no subject) Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1226996302-10234-3-git-send-email-cooloney@kernel.org \
    --to=cooloney@kernel.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@sirena.org.uk \
    --cc=cliff.cai@analog.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox