From: Bryan Wu <cooloney@kernel.org>
To: torvalds@linux-foundation.org, akpm@linux-foundation.org, mingo@elte.hu
Cc: linux-kernel@vger.kernel.org, Graf Yang <graf.yang@analog.com>,
Bryan Wu <cooloney@kernel.org>
Subject: [PATCH 5/5] Blackfin arch: SMP supporting patchset: some other misc code
Date: Tue, 18 Nov 2008 17:05:08 +0800 [thread overview]
Message-ID: <1226999108-13839-6-git-send-email-cooloney@kernel.org> (raw)
In-Reply-To: <1226999108-13839-1-git-send-email-cooloney@kernel.org>
From: Graf Yang <graf.yang@analog.com>
Blackfin dual core BF561 processor can support SMP like features.
https://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:smp-like
In this patch, we provide SMP extend to some other misc code
Singed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
arch/blackfin/Kconfig | 32 +++++++++++++++++++++-
arch/blackfin/kernel/vmlinux.lds.S | 4 +-
arch/blackfin/mach-bf518/include/mach/mem_map.h | 15 ++++++++++
arch/blackfin/mach-bf527/include/mach/mem_map.h | 15 ++++++++++
arch/blackfin/mach-bf533/include/mach/mem_map.h | 15 ++++++++++
arch/blackfin/mach-bf537/include/mach/mem_map.h | 15 ++++++++++
arch/blackfin/mach-bf538/include/mach/mem_map.h | 15 ++++++++++
arch/blackfin/mach-bf548/include/mach/mem_map.h | 15 ++++++++++
8 files changed, 122 insertions(+), 4 deletions(-)
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 004c06c..7fc8a51 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -200,6 +200,32 @@ config BF561
endchoice
+config SMP
+ depends on BF561
+ bool "Symmetric multi-processing support"
+ ---help---
+ This enables support for systems with more than one CPU,
+ like the dual core BF561. If you have a system with only one
+ CPU, say N. If you have a system with more than one CPU, say Y.
+
+ If you don't know what to do here, say N.
+
+config NR_CPUS
+ int
+ depends on SMP
+ default 2 if BF561
+
+config IRQ_PER_CPU
+ bool
+ depends on SMP
+ default y
+
+config TICK_SOURCE_SYSTMR0
+ bool
+ select BFIN_GPTIMERS
+ depends on SMP
+ default y
+
config BF_REV_MIN
int
default 0 if (BF51x || BF52x || BF54x)
@@ -502,6 +528,7 @@ source kernel/Kconfig.hz
config GENERIC_TIME
bool "Generic time"
+ depends on !SMP
default y
config GENERIC_CLOCKEVENTS
@@ -576,6 +603,7 @@ endmenu
menu "Blackfin Kernel Optimizations"
+ depends on !SMP
comment "Memory Optimizations"
@@ -738,7 +766,6 @@ config BFIN_INS_LOWOVERHEAD
endmenu
-
choice
prompt "Kernel executes from"
help
@@ -804,7 +831,8 @@ config BFIN_ICACHE_LOCK
choice
prompt "Policy"
depends on BFIN_DCACHE
- default BFIN_WB
+ default BFIN_WB if !SMP
+ default BFIN_WT if SMP
config BFIN_WB
bool "Write back"
help
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index 7d12c66..2a48535 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -109,7 +109,7 @@ SECTIONS
#endif
DATA_DATA
- *(.data.*)
+ *(.data)
CONSTRUCTORS
/* make sure the init_task is aligned to the
@@ -161,6 +161,7 @@ SECTIONS
*(.con_initcall.init)
___con_initcall_end = .;
}
+ PERCPU(4)
SECURITY_INIT
.init.ramfs :
{
@@ -236,7 +237,6 @@ SECTIONS
. = ALIGN(4);
__ebss_l2 = .;
}
-
/* Force trailing alignment of our init section so that when we
* free our init memory, we don't leave behind a partial page.
*/
diff --git a/arch/blackfin/mach-bf518/include/mach/mem_map.h b/arch/blackfin/mach-bf518/include/mach/mem_map.h
index 10f678f..ac95d33 100644
--- a/arch/blackfin/mach-bf518/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf518/include/mach/mem_map.h
@@ -99,4 +99,19 @@
#define L1_SCRATCH_START 0xFFB00000
#define L1_SCRATCH_LENGTH 0x1000
+#define get_l1_scratch_start_cpu(cpu) L1_SCRATCH_START
+#define get_l1_code_start_cpu(cpu) L1_CODE_START
+#define get_l1_data_a_start_cpu(cpu) L1_DATA_A_START
+#define get_l1_data_b_start_cpu(cpu) L1_DATA_B_START
+#define get_l1_scratch_start() L1_SCRATCH_START
+#define get_l1_code_start() L1_CODE_START
+#define get_l1_data_a_start() L1_DATA_A_START
+#define get_l1_data_b_start() L1_DATA_B_START
+
+#define GET_PDA_SAFE(preg) \
+ preg.l = _cpu_pda; \
+ preg.h = _cpu_pda;
+
+#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
+
#endif /* _MEM_MAP_518_H_ */
diff --git a/arch/blackfin/mach-bf527/include/mach/mem_map.h b/arch/blackfin/mach-bf527/include/mach/mem_map.h
index ef46dc9..bd7fe0f 100644
--- a/arch/blackfin/mach-bf527/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf527/include/mach/mem_map.h
@@ -99,4 +99,19 @@
#define L1_SCRATCH_START 0xFFB00000
#define L1_SCRATCH_LENGTH 0x1000
+#define get_l1_scratch_start_cpu(cpu) L1_SCRATCH_START
+#define get_l1_code_start_cpu(cpu) L1_CODE_START
+#define get_l1_data_a_start_cpu(cpu) L1_DATA_A_START
+#define get_l1_data_b_start_cpu(cpu) L1_DATA_B_START
+#define get_l1_scratch_start() L1_SCRATCH_START
+#define get_l1_code_start() L1_CODE_START
+#define get_l1_data_a_start() L1_DATA_A_START
+#define get_l1_data_b_start() L1_DATA_B_START
+
+#define GET_PDA_SAFE(preg) \
+ preg.l = _cpu_pda; \
+ preg.h = _cpu_pda;
+
+#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
+
#endif /* _MEM_MAP_527_H_ */
diff --git a/arch/blackfin/mach-bf533/include/mach/mem_map.h b/arch/blackfin/mach-bf533/include/mach/mem_map.h
index 581fc6e..d5eaef2 100644
--- a/arch/blackfin/mach-bf533/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf533/include/mach/mem_map.h
@@ -168,4 +168,19 @@
#define L1_SCRATCH_START 0xFFB00000
#define L1_SCRATCH_LENGTH 0x1000
+#define get_l1_scratch_start_cpu(cpu) L1_SCRATCH_START
+#define get_l1_code_start_cpu(cpu) L1_CODE_START
+#define get_l1_data_a_start_cpu(cpu) L1_DATA_A_START
+#define get_l1_data_b_start_cpu(cpu) L1_DATA_B_START
+#define get_l1_scratch_start() L1_SCRATCH_START
+#define get_l1_code_start() L1_CODE_START
+#define get_l1_data_a_start() L1_DATA_A_START
+#define get_l1_data_b_start() L1_DATA_B_START
+
+#define GET_PDA_SAFE(preg) \
+ preg.l = _cpu_pda; \
+ preg.h = _cpu_pda;
+
+#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
+
#endif /* _MEM_MAP_533_H_ */
diff --git a/arch/blackfin/mach-bf537/include/mach/mem_map.h b/arch/blackfin/mach-bf537/include/mach/mem_map.h
index 5078b66..be4de76 100644
--- a/arch/blackfin/mach-bf537/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf537/include/mach/mem_map.h
@@ -176,4 +176,19 @@
#define L1_SCRATCH_START 0xFFB00000
#define L1_SCRATCH_LENGTH 0x1000
+#define get_l1_scratch_start_cpu(cpu) L1_SCRATCH_START
+#define get_l1_code_start_cpu(cpu) L1_CODE_START
+#define get_l1_data_a_start_cpu(cpu) L1_DATA_A_START
+#define get_l1_data_b_start_cpu(cpu) L1_DATA_B_START
+#define get_l1_scratch_start() L1_SCRATCH_START
+#define get_l1_code_start() L1_CODE_START
+#define get_l1_data_a_start() L1_DATA_A_START
+#define get_l1_data_b_start() L1_DATA_B_START
+
+#define GET_PDA_SAFE(preg) \
+ preg.l = _cpu_pda; \
+ preg.h = _cpu_pda;
+
+#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
+
#endif /* _MEM_MAP_537_H_ */
diff --git a/arch/blackfin/mach-bf538/include/mach/mem_map.h b/arch/blackfin/mach-bf538/include/mach/mem_map.h
index d65d430..c134057 100644
--- a/arch/blackfin/mach-bf538/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf538/include/mach/mem_map.h
@@ -104,4 +104,19 @@
#define L1_SCRATCH_START 0xFFB00000
#define L1_SCRATCH_LENGTH 0x1000
+#define get_l1_scratch_start_cpu(cpu) L1_SCRATCH_START
+#define get_l1_code_start_cpu(cpu) L1_CODE_START
+#define get_l1_data_a_start_cpu(cpu) L1_DATA_A_START
+#define get_l1_data_b_start_cpu(cpu) L1_DATA_B_START
+#define get_l1_scratch_start() L1_SCRATCH_START
+#define get_l1_code_start() L1_CODE_START
+#define get_l1_data_a_start() L1_DATA_A_START
+#define get_l1_data_b_start() L1_DATA_B_START
+
+#define GET_PDA_SAFE(preg) \
+ preg.l = _cpu_pda; \
+ preg.h = _cpu_pda;
+
+#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
+
#endif /* _MEM_MAP_538_H_ */
diff --git a/arch/blackfin/mach-bf548/include/mach/mem_map.h b/arch/blackfin/mach-bf548/include/mach/mem_map.h
index a222842..361eb0e 100644
--- a/arch/blackfin/mach-bf548/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf548/include/mach/mem_map.h
@@ -108,4 +108,19 @@
#define L1_SCRATCH_START 0xFFB00000
#define L1_SCRATCH_LENGTH 0x1000
+#define get_l1_scratch_start_cpu(cpu) L1_SCRATCH_START
+#define get_l1_code_start_cpu(cpu) L1_CODE_START
+#define get_l1_data_a_start_cpu(cpu) L1_DATA_A_START
+#define get_l1_data_b_start_cpu(cpu) L1_DATA_B_START
+#define get_l1_scratch_start() L1_SCRATCH_START
+#define get_l1_code_start() L1_CODE_START
+#define get_l1_data_a_start() L1_DATA_A_START
+#define get_l1_data_b_start() L1_DATA_B_START
+
+#define GET_PDA_SAFE(preg) \
+ preg.l = _cpu_pda; \
+ preg.h = _cpu_pda;
+
+#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
+
#endif/* _MEM_MAP_548_H_ */
--
1.5.6.3
next prev parent reply other threads:[~2008-11-18 9:05 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-18 9:05 [PATCH 0/5] Blackfin SMP like patchset Bryan Wu
2008-11-18 9:05 ` [PATCH 1/5] Blackfin arch: SMP supporting patchset: BF561 related code Bryan Wu
2008-11-19 6:56 ` Andrew Morton
2008-11-19 7:39 ` Bryan Wu
2008-11-19 8:10 ` gyang
2008-11-18 9:05 ` [PATCH 2/5] Blackfin arch: SMP supporting patchset: Blackfin header files and machine common code Bryan Wu
2008-11-19 6:56 ` Andrew Morton
2008-11-19 7:05 ` Nick Piggin
2008-11-19 7:44 ` Bryan Wu
2008-11-19 7:42 ` Bryan Wu
2008-11-20 13:50 ` Mike Frysinger
2008-11-19 7:52 ` gyang
2008-11-19 8:20 ` Bryan Wu
2008-11-19 7:44 ` Bryan Wu
2008-11-18 9:05 ` [PATCH 3/5] Blackfin arch: SMP supporting patchset: Blackfin CPLB related code Bryan Wu
2008-11-19 7:45 ` Bryan Wu
2008-11-18 9:05 ` [PATCH 4/5] Blackfin arch: SMP supporting patchset: Blackfin kernel and memory management code Bryan Wu
2008-11-19 7:46 ` Bryan Wu
2008-11-18 9:05 ` Bryan Wu [this message]
2008-11-19 7:47 ` [PATCH 5/5] Blackfin arch: SMP supporting patchset: some other misc code Bryan Wu
2008-11-19 6:56 ` [PATCH 0/5] Blackfin SMP like patchset Andrew Morton
2008-11-19 7:27 ` Bryan Wu
2008-11-19 7:28 ` Bryan Wu
2008-11-19 13:51 ` Mike Frysinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1226999108-13839-6-git-send-email-cooloney@kernel.org \
--to=cooloney@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=graf.yang@analog.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox