From: "Antonio R. Costa" <costa.antonior@gmail.com>
To: linux@maxim.org.za, nicolas.ferre@atmel.com
Cc: linux-arm-kernel@lists.arm.linux.org.uk,
linux-kernel@vger.kernel.org,
"Antonio R. Costa" <costa.antonior@gmail.com>
Subject: [PATCH 3/5] [RFC PATCH] Support for AT572D940HF-EK [RFC PATCH]
Date: Tue, 25 Nov 2008 16:22:43 +0100 [thread overview]
Message-ID: <1227626565-25209-3-git-send-email-costa.antonior@gmail.com> (raw)
In-Reply-To: <1227626565-25209-2-git-send-email-costa.antonior@gmail.com>
AT572D940HF (Diopsis) is an ARM926 + a 40-bits floating point DSP
(mAgicV)
Reference for machine type:
1783 Atmel DIOPSIS AT572D940HF EK
This RFC patch starts from v2.6.26 because we needed to
test it together with Xenomai 2.4.5.
This patch, if approved, will be rebased to the latest linux kernel.
Shared files in arch/arm and drivers/net
arch/arm/Kconfig
arch/arm/mach-at91/Kconfig
arch/arm/mach-at91/Makefile
arch/arm/mach-at91/clock.c
arch/arm/mach-at91/clock.h
arch/arm/mach-at91/generic.h
arch/arm/mm/Kconfig
arch/arm/tools/mach-types
drivers/net/Kconfig
Signed-off-by: Antonio R. Costa <costa.antonior@gmail.com>
---
arch/arm/Kconfig | 2 +-
arch/arm/mach-at91/Kconfig | 33 +++++++++++++++++++++++++++++++--
arch/arm/mach-at91/Makefile | 4 ++++
arch/arm/mach-at91/clock.c | 5 +++++
arch/arm/mach-at91/clock.h | 5 +++++
arch/arm/mach-at91/generic.h | 2 ++
arch/arm/mm/Kconfig | 4 ++--
arch/arm/tools/mach-types | 1 +
drivers/net/Kconfig | 2 +-
9 files changed, 52 insertions(+), 6 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b786e68..9dbf7a0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -217,7 +217,7 @@ config ARCH_AT91
select GENERIC_GPIO
help
This enables support for systems based on the Atmel AT91RM9200,
- AT91SAM9 and AT91CAP9 processors.
+ AT91SAM9, AT91CAP9 and AT572D940HF processors.
config ARCH_CLPS7500
bool "Cirrus CL-PS7500FE"
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 0fc07b6..e688c1a 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -38,6 +38,14 @@ config ARCH_AT91CAP9
config ARCH_AT91X40
bool "AT91x40"
+config ARCH_AT572D940HF
+ bool "AT572D940HF"
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ help
+ Select this if you are using Atmel AT572D940HF ARM926EJS + mAgicV 40-points floating DSP
+ <http://www.atmel.com/products/diopsis/default.asp>
+
endchoice
config AT91_PMC_UNIT
@@ -241,19 +249,40 @@ config MACH_AT91EB01
endif
+if ARCH_AT572D940HF
+
+comment "AT572D940HF Board Type"
+
+config MACH_AT572D940HF_EB
+ bool "AT572D940HF-EK"
+ depends on ARCH_AT572D940HF
+ help
+ Select this if you are using Atmel's AT572D940HF-EK evaluation kit.
+ <http://www.atmel.com/products/diopsis/default.asp>
+endif
+
# ----------------------------------------------------------
comment "AT91 Board Options"
+if MACH_AT572D940HF_EB
+config NUM_SERIAL
+ int "Number of UARTs to configure"
+ range 1 4
+ help
+ Defines the number of USARTs to configure in the following list DBGU, USART0, USART1, USART2
+endif
+
+
config MTD_AT91_DATAFLASH_CARD
bool "Enable DataFlash Card support"
- depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK || MACH_SAM9_L9260 || MACH_ECBAT91)
+ depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK || MACH_SAM9_L9260 || MACH_ECBAT91 || MACH_AT572D940HF_EB)
help
Enable support for the DataFlash card.
config MTD_NAND_AT91_BUSWIDTH_16
bool "Enable 16-bit data bus interface to NAND flash"
- depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK)
+ depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK || MACH_AT572D940HF_EB)
help
On AT91SAM926x boards both types of NAND flash can be present
(8 and 16 bit data bus width).
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 8d9bc01..0d68a51 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_d
obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o
obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
+obj-$(CONFIG_ARCH_AT572D940HF) += at572d940hf.o at91sam926x_time.o at572d940hf_devices.o
# AT91RM9200 board-specific support
obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
@@ -51,6 +52,9 @@ obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
# AT91X40 board-specific support
obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
+# AT572D940HF board-specific support
+obj-$(CONFIG_MACH_AT572D940HF_EB) += board-at572d940hf_ek.o
+
# Drivers
obj-y += leds.o
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index a33dfe4..e2ab66d 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -575,7 +575,12 @@ int __init at91_clock_init(unsigned long main_clock)
udpck.pmc_mask = AT91SAM926x_PMC_UDP;
} else if (cpu_is_at91cap9()) {
uhpck.pmc_mask = AT91CAP9_PMC_UHP;
+ } else if (cpu_is_at572d940hf()) {
+ printk("Architecture recognised\n");
+ uhpck.pmc_mask = (1<<6);
+ udpck.pmc_mask = AT572D940HF_PMC_UDP;
}
+
at91_sys_write(AT91_CKGR_PLLBR, 0);
udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
diff --git a/arch/arm/mach-at91/clock.h b/arch/arm/mach-at91/clock.h
index 1ba3b95..0212c37 100644
--- a/arch/arm/mach-at91/clock.h
+++ b/arch/arm/mach-at91/clock.h
@@ -22,10 +22,15 @@ struct clk {
struct clk *parent;
u32 pmc_mask;
void (*mode)(struct clk *, int);
+#ifdef ARCH_AT572D940HF
+ unsigned id:3; /* AT572D940HF needs an extra bit */
+#else
unsigned id:2; /* PCK0..3, or 32k/main/a/b */
+#endif
unsigned type; /* clock type */
u16 users;
};
+
extern int __init clk_register(struct clk *clk);
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 7b9ce7a..9faf1f5 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -16,6 +16,7 @@ extern void __init at91sam9263_initialize(unsigned long main_clock);
extern void __init at91sam9rl_initialize(unsigned long main_clock);
extern void __init at91x40_initialize(unsigned long main_clock);
extern void __init at91cap9_initialize(unsigned long main_clock);
+extern void __init at572d940hf_initialize(unsigned long main_clock);
/* Interrupts */
extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
@@ -25,6 +26,7 @@ extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
extern void __init at91x40_init_interrupts(unsigned int priority[]);
extern void __init at91cap9_init_interrupts(unsigned int priority[]);
+extern void __init at572d940hf_init_interrupts(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[]);
/* Timer */
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 33ed048..36142ae 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -180,8 +180,8 @@ config CPU_ARM925T
# ARM926T
config CPU_ARM926T
bool "Support ARM926T processor"
- depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI
- default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI
+ depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_AT572D940HF || ARCH_NS9XXX || ARCH_DAVINCI
+ default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_AT572D940HF || ARCH_NS9XXX || ARCH_DAVINCI
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_PABRT_NOIFAR
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 207a8b5..fea25ce 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -1720,3 +1720,4 @@ htc_kaiser MACH_HTC_KAISER HTC_KAISER 1724
lg_ks20 MACH_LG_KS20 LG_KS20 1725
hhgps MACH_HHGPS HHGPS 1726
nokia_n810_wimax MACH_NOKIA_N810_WIMAX NOKIA_N810_WIMAX 1727
+at572d940hf MACH_AT572D940HF_EB AT572D940HF_EB 1783
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index f4182cf..bb03261 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -217,7 +217,7 @@ config MII
config MACB
tristate "Atmel MACB support"
- depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91CAP9
+ depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91CAP9 || ARCH_AT572D940HF
select PHYLIB
help
The Atmel MACB ethernet interface is found on many AT32 and AT91
--
1.5.4.3
next prev parent reply other threads:[~2008-11-25 15:23 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-25 15:22 [PATCH 1/5] [RFC PATCH] Support for AT572D940HF-EK [RFC PATCH] Antonio R. Costa
2008-11-25 15:22 ` [PATCH 2/5] " Antonio R. Costa
2008-11-25 15:22 ` Antonio R. Costa [this message]
2008-11-25 15:22 ` [PATCH 4/5] " Antonio R. Costa
2008-11-25 15:22 ` [PATCH 5/5] " Antonio R. Costa
2009-04-20 12:26 ` [PATCH 1/5] " Jean-Christophe PLAGNIOL-VILLARD
2009-05-01 9:40 ` Andrew Victor
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1227626565-25209-3-git-send-email-costa.antonior@gmail.com \
--to=costa.antonior@gmail.com \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@maxim.org.za \
--cc=nicolas.ferre@atmel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox