public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Matt Mackall <mpm@selenic.com>
To: Andrew Morton <akpm@linux-foundation.org>,
	Hugh Dickins <hugh@veritas.com>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: [PATCH] shmem: unify regular and tiny shmem
Date: Thu, 04 Dec 2008 15:19:24 -0600	[thread overview]
Message-ID: <1228425564.3255.121.camel@calx> (raw)

tiny-shmem shares most of its 130 lines of code with shmem and tends
to break when particular bits of shmem get modified. Unifying saves
code and makes keeping these two in sync much easier.

before:
  14367	    392	     24	  14783	   39bf	mm/shmem.o
    396      72       8     476	    1dc	mm/tiny-shmem.o

after:
  14367	    392	     24	  14783	   39bf	mm/shmem.o
    412	     72       8     492	    1ec	mm/shmem.o tiny

Signed-off-by: Matt Mackall <mpm@selenic.com>

diff -r 8a9f1e9c46e8 -r 3fd7e399e034 init/Kconfig
--- a/init/Kconfig	Mon Oct 27 17:33:21 2008 -0500
+++ b/init/Kconfig	Mon Oct 27 17:33:24 2008 -0500
@@ -830,10 +830,6 @@
 	boolean
 	select PLIST
 
-config TINY_SHMEM
-	default !SHMEM
-	bool
-
 config BASE_SMALL
 	int
 	default 0 if BASE_FULL
diff -r 8a9f1e9c46e8 -r 3fd7e399e034 mm/Makefile
--- a/mm/Makefile	Mon Oct 27 17:33:21 2008 -0500
+++ b/mm/Makefile	Mon Oct 27 17:33:24 2008 -0500
@@ -9,7 +9,7 @@
 
 obj-y			:= bootmem.o filemap.o mempool.o oom_kill.o fadvise.o \
 			   maccess.o page_alloc.o page-writeback.o pdflush.o \
-			   readahead.o swap.o truncate.o vmscan.o \
+			   readahead.o swap.o truncate.o vmscan.o shmem.o \
 			   prio_tree.o util.o mmzone.o vmstat.o backing-dev.o \
 			   page_isolation.o mm_init.o $(mmu-y)
 
@@ -21,9 +21,7 @@
 obj-$(CONFIG_NUMA) 	+= mempolicy.o
 obj-$(CONFIG_SPARSEMEM)	+= sparse.o
 obj-$(CONFIG_SPARSEMEM_VMEMMAP) += sparse-vmemmap.o
-obj-$(CONFIG_SHMEM) += shmem.o
 obj-$(CONFIG_TMPFS_POSIX_ACL) += shmem_acl.o
-obj-$(CONFIG_TINY_SHMEM) += tiny-shmem.o
 obj-$(CONFIG_SLOB) += slob.o
 obj-$(CONFIG_MMU_NOTIFIER) += mmu_notifier.o
 obj-$(CONFIG_SLAB) += slab.o
diff -r 8a9f1e9c46e8 -r 3fd7e399e034 mm/shmem.c
--- a/mm/shmem.c	Mon Oct 27 17:33:21 2008 -0500
+++ b/mm/shmem.c	Mon Oct 27 17:33:24 2008 -0500
@@ -14,31 +14,39 @@
  * Copyright (c) 2004, Luke Kenneth Casson Leighton <lkcl@lkcl.net>
  * Copyright (c) 2004 Red Hat, Inc., James Morris <jmorris@redhat.com>
  *
+ * tiny-shmem:
+ * Copyright (c) 2004, 2008 Matt Mackall <mpm@selenic.com>
+ *
  * This file is released under the GPL.
  */
 
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/vfs.h>
+#include <linux/mount.h>
+#include <linux/file.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/swap.h>
+
+static struct vfsmount *shm_mnt;
+
+#ifdef CONFIG_SHMEM
 /*
  * This virtual memory filesystem is heavily based on the ramfs. It
  * extends ramfs by the ability to use swap and honor resource limits
  * which makes it a completely usable filesystem.
  */
 
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/fs.h>
 #include <linux/xattr.h>
 #include <linux/exportfs.h>
 #include <linux/generic_acl.h>
-#include <linux/mm.h>
 #include <linux/mman.h>
-#include <linux/file.h>
-#include <linux/swap.h>
 #include <linux/pagemap.h>
 #include <linux/string.h>
 #include <linux/slab.h>
 #include <linux/backing-dev.h>
 #include <linux/shmem_fs.h>
-#include <linux/mount.h>
 #include <linux/writeback.h>
 #include <linux/vfs.h>
 #include <linux/blkdev.h>
@@ -2486,7 +2494,6 @@
 	.get_sb		= shmem_get_sb,
 	.kill_sb	= kill_litter_super,
 };
-static struct vfsmount *shm_mnt;
 
 static int __init init_tmpfs(void)
 {
@@ -2525,7 +2532,51 @@
 	shm_mnt = ERR_PTR(error);
 	return error;
 }
-module_init(init_tmpfs)
+
+#else /* !CONFIG_SHMEM */
+
+/*
+ * tiny-shmem: simple shmemfs and tmpfs using ramfs code
+ *
+ * This is intended for small system where the benefits of the full
+ * shmem code (swap-backed and resource-limited) are outweighed by
+ * their complexity. On systems without swap this code should be
+ * effectively equivalent, but much lighter weight.
+ */
+
+#include <linux/ramfs.h>
+
+static struct file_system_type tmpfs_fs_type = {
+	.name		= "tmpfs",
+	.get_sb		= ramfs_get_sb,
+	.kill_sb	= kill_litter_super,
+};
+
+static int __init init_tmpfs(void)
+{
+	BUG_ON(register_filesystem(&tmpfs_fs_type) != 0);
+
+	shm_mnt = kern_mount(&tmpfs_fs_type);
+	BUG_ON(IS_ERR(shm_mnt));
+
+	return 0;
+}
+
+int shmem_unuse(swp_entry_t entry, struct page *page)
+{
+	return 0;
+}
+
+#define shmem_file_operations ramfs_file_operations
+#define shmem_vm_ops generic_file_vm_ops
+#define shmem_get_inode ramfs_get_inode
+#define shmem_acct_size(a, b) 0
+#define shmem_unacct_size(a, b) do {} while (0)
+#define SHMEM_MAX_BYTES LLONG_MAX
+
+#endif /* CONFIG_SHMEM */
+
+/* common code */
 
 /**
  * shmem_file_setup - get an unlinked file living in tmpfs
@@ -2569,12 +2620,20 @@
 	if (!inode)
 		goto close_file;
 
+#ifdef CONFIG_SHMEM
 	SHMEM_I(inode)->flags = flags & VM_ACCOUNT;
+#endif
 	d_instantiate(dentry, inode);
 	inode->i_size = size;
 	inode->i_nlink = 0;	/* It is unlinked */
 	init_file(file, shm_mnt, dentry, FMODE_WRITE | FMODE_READ,
-			&shmem_file_operations);
+		  &shmem_file_operations);
+
+#ifndef CONFIG_MMU
+	error = ramfs_nommu_expand_for_mapping(inode, size);
+	if (error)
+		goto close_file;
+#endif
 	return file;
 
 close_file:
@@ -2606,3 +2665,5 @@
 	vma->vm_ops = &shmem_vm_ops;
 	return 0;
 }
+
+module_init(init_tmpfs)

-- 
Mathematics is the supreme nostalgia of our time.


             reply	other threads:[~2008-12-04 21:19 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-12-04 21:19 Matt Mackall [this message]
2008-12-05 13:18 ` [PATCH] shmem: unify regular and tiny shmem Hugh Dickins
2008-12-05 18:15   ` Matt Mackall
2008-12-05 22:21     ` Hugh Dickins
2008-12-05 22:43       ` Matt Mackall
2008-12-05 22:51         ` Hugh Dickins

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1228425564.3255.121.camel@calx \
    --to=mpm@selenic.com \
    --cc=akpm@linux-foundation.org \
    --cc=hugh@veritas.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox