From: rhubbell <rhubbell@ihubbell.com>
To: Robert Hancock <hancockr@shaw.ca>
Cc: linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: USB memory card reader and 64MB SD card - 2.6.28-git14
Date: Tue, 13 Jan 2009 20:40:19 -0800 [thread overview]
Message-ID: <1231908019.4299.40.camel@127> (raw)
In-Reply-To: <496D5C7A.9040505@shaw.ca>
After just replying to this... I plugged the card reader
into the PS3 and can read both SD cards, no problem.
It does seem to point back to the kernel.
I'll try to figure out how to get more info out of the USB bus.
Enable verbose for starters and see where that goes.
On Tue, 2009-01-13 at 21:31 -0600, Robert Hancock wrote:
> rhubbell wrote:
> > Darn, I meant to respond to the list also.
> > Anyway there is no dmesg output for the card.
> > The dmesg output looks correct with the 128MB card.
> >
> > Here's for the 128:
> > scsi0 : SCSI emulation for USB Mass Storage devices
> > usb-storage: device found at 2
> > usb-storage: waiting for device to settle before scanning
> > scsi 0:0:0:0: Direct-Access USB Card Reader 1.01 PQ: 0 ANSI: 0 CCS
> > sd 0:0:0:0: [sda] 251904 512-byte hardware sectors: (128 MB/123 MiB)
> > sd 0:0:0:0: [sda] Write Protect is off
> > sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
> > sd 0:0:0:0: [sda] Assuming drive cache: write through
> > sd 0:0:0:0: [sda] 251904 512-byte hardware sectors: (128 MB/123 MiB)
> > sd 0:0:0:0: [sda] Write Protect is off
> > sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
> > sd 0:0:0:0: [sda] Assuming drive cache: write through
> > sda: sda1
> > sd 0:0:0:0: [sda] Attached SCSI removable disk
> > sd 0:0:0:0: Attached scsi generic sg0 type 0
> > usb-storage: device scan complete
>
> That output seems rather normal.. If you're not getting anything like
> that with the other card though, I would tend to suspect some kind of
> issue with the card, the reader or some kind of incompatibility between
> them. Certainly all the USB resets from the other output would tend to
> suggest the reader isn't responding properly with that card installed..
prev parent reply other threads:[~2009-01-14 4:40 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-10 21:05 USB memory card reader and 64MB SD card - 2.6.28-git14 rhubbell
2009-01-10 23:55 ` Robert Hancock
[not found] ` <1231816304.9368.22.camel@127>
2009-01-13 5:17 ` Robert Hancock
[not found] ` <1231829328.19241.3.camel@127>
2009-01-14 3:31 ` Robert Hancock
2009-01-14 4:29 ` rhubbell
2009-01-14 4:40 ` rhubbell [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1231908019.4299.40.camel@127 \
--to=rhubbell@ihubbell.com \
--cc=hancockr@shaw.ca \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox