From: Jaswinder Singh Rajput <jaswinder@kernel.org>
To: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Sam Ravnborg <sam@ravnborg.org>, x86 maintainers <x86@kernel.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: Re: [GIT PULL -tip] fix 41 'make headers_check' warnings
Date: Sun, 18 Jan 2009 16:56:53 +0530 [thread overview]
Message-ID: <1232278013.3130.8.camel@localhost.localdomain> (raw)
In-Reply-To: <20090118110221.GA29602@elte.hu>
On Sun, 2009-01-18 at 12:02 +0100, Ingo Molnar wrote:
> * Jaswinder Singh Rajput <jaswinder@kernel.org> wrote:
>
> > diff --git a/include/linux/acct.h b/include/linux/acct.h
> > index 882dc72..a20c97c 100644
> > --- a/include/linux/acct.h
> > +++ b/include/linux/acct.h
> > @@ -59,9 +59,13 @@ struct acct
> > comp_t ac_majflt; /* Major Pagefaults */
> > comp_t ac_swaps; /* Number of Swaps */
> > /* m68k had no padding here. */
> > -#if !defined(CONFIG_M68K) || !defined(__KERNEL__)
> > +#ifdef __KERNEL__
> > +#ifndef CONFIG_M68K
> > __u16 ac_ahz; /* AHZ */
> > -#endif
> > +#endif /* CONFIG_M68K */
> > +#else /* __KERNEL__ */
> > + __u16 ac_ahz; /* AHZ */
> > +#endif /* __KERNEL__ */
>
> that looks rather ugly.
>
> Why not just flip it around to:
>
> #if !defined(__KERNEL__) || !defined(CONFIG_M68K)
>
> ? Does headers_check misinterpret that?
>
This will not many any difference:
then usr/include/linux/acct.h will look like:
#if !defined(__KERNEL__) || !defined(CONFIG_M68K)
__u16 ac_ahz; /* AHZ */
#endif
And we will get same warning:
usr/include/linux/acct.h:62: leaks CONFIG_M68K to userspace where it is not valid
> > * To make everything easier to port and manage cross platform
> > diff --git a/include/linux/kernel.h b/include/linux/kernel.h
> > index 343df9e..1202063 100644
> > --- a/include/linux/kernel.h
> > +++ b/include/linux/kernel.h
> > @@ -528,6 +528,7 @@ struct sysinfo {
> > /* Trap pasters of __FUNCTION__ at compile-time */
> > #define __FUNCTION__ (__func__)
> >
> > +#ifdef __KERNEL__
> > /* This helps us to avoid #ifdef CONFIG_NUMA */
> > #ifdef CONFIG_NUMA
> > #define NUMA_BUILD 1
> > @@ -540,4 +541,8 @@ struct sysinfo {
> > # define REBUILD_DUE_TO_FTRACE_MCOUNT_RECORD
> > #endif
> >
> > +#else /* __KERNEL__ */
> > +#define NUMA_BUILD 0
> > +#endif /* __KERNEL__ */
>
> Does NUMA_BUILD make any sense to user-space at all? Shouldnt we leave it
> undefined?
>
OK, I can do this.
> > --- a/include/linux/pktcdvd.h
> > +++ b/include/linux/pktcdvd.h
> > @@ -33,11 +33,15 @@
> > * able to sucessfully recover with this option (drive will return good
> > * status as soon as the cdb is validated).
> > */
> > +#ifdef __KERNEL__
> > #if defined(CONFIG_CDROM_PKTCDVD_WCACHE)
> > #define USE_WCACHING 1
> > #else
> > #define USE_WCACHING 0
> > #endif
> > +#else /* __KERNEL__ */
> > +#define USE_WCACHING 0
> > +#endif /* __KERNEL__ */
>
> does USE_WCACHING make any sense to user-space? Shouldnt we leave it
> undefined?
>
Sure.
> > diff --git a/include/linux/raw.h b/include/linux/raw.h
> > index 62d543e..3898e30 100644
> > --- a/include/linux/raw.h
> > +++ b/include/linux/raw.h
> > @@ -13,6 +13,10 @@ struct raw_config_request
> > __u64 block_minor;
> > };
> >
> > +#ifdef __KERNEL__
> > #define MAX_RAW_MINORS CONFIG_MAX_RAW_DEVS
> > +#else /* __KERNEL__ */
> > +#define MAX_RAW_MINORS 0
> > +#endif /* __KERNEL__ */
>
> ditto.
>
OK.
> > #endif /* __LINUX_RAW_H */
> > diff --git a/include/linux/socket.h b/include/linux/socket.h
> > index f5771a2..d7daa52 100644
> > --- a/include/linux/socket.h
> > +++ b/include/linux/socket.h
> > @@ -256,11 +256,15 @@ struct ucred {
> > #define MSG_CMSG_CLOEXEC 0x40000000 /* Set close_on_exit for file
> > descriptor received through
> > SCM_RIGHTS */
> > +#ifdef __KERNEL__
> > #if defined(CONFIG_COMPAT)
> > #define MSG_CMSG_COMPAT 0x80000000 /* This message needs 32 bit fixups */
> > #else
> > #define MSG_CMSG_COMPAT 0 /* We never have 32 bit fixups */
> > #endif
> > +#else /* __KERNEL__ */
> > +#define MSG_CMSG_COMPAT 0 /* We never have 32 bit fixups */
> > +#endif /* __KERNEL__ */
>
> I suspect this flag should always be defined for user-space - the zero
> value only makes sense in the kernel.
>
OK.
> > --- a/include/linux/types.h
> > +++ b/include/linux/types.h
> > @@ -138,6 +138,7 @@ typedef __s64 int64_t;
> > *
> > * blkcnt_t is the type of the inode's block count.
> > */
> > +#ifdef __KERNEL__
> > #ifdef CONFIG_LBD
> > typedef u64 sector_t;
> > typedef u64 blkcnt_t;
> > @@ -145,6 +146,10 @@ typedef u64 blkcnt_t;
> > typedef unsigned long sector_t;
> > typedef unsigned long blkcnt_t;
> > #endif
> > +#else /* __KERNEL__ */
> > +typedef unsigned long sector_t;
> > +typedef unsigned long blkcnt_t;
> > +#endif /* __KERNEL__ */
>
> heh. types.h itself is not headers_check clean.
>
> But this isnt particularly clean: we have now 3 blocks of typedefs while
> there are just 2 variants. It would be cleaner to do something like:
>
> #if !defined(__KERNEL__) || defined(CONFIG_LBD)
>
> i.e. always provide the wider type to user-space.
Sorry, this will not be helpful we will still get the warning.
Now we need to decide, should we manage with 3 blocks or should we stay
with warnings.
But usr/include/types.h looks pretty clean:
/**
* The type used for indexing onto a disc or disc partition.
*
* Linux always considers sectors to be 512 bytes long independently
* of the devices real block size.
*
* blkcnt_t is the type of the inode's block count.
*/
typedef unsigned long sector_t;
typedef unsigned long blkcnt_t;
--
JSR
next prev parent reply other threads:[~2009-01-18 11:31 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-18 10:10 [GIT PULL -tip] fix 41 'make headers_check' warnings Jaswinder Singh Rajput
2009-01-18 11:02 ` Ingo Molnar
2009-01-18 11:26 ` Jaswinder Singh Rajput [this message]
2009-01-18 12:26 ` Ingo Molnar
2009-01-18 12:57 ` Sam Ravnborg
2009-01-18 13:00 ` Sam Ravnborg
2009-01-18 17:29 ` Ingo Molnar
2009-01-21 0:58 ` Jaswinder Singh Rajput
2009-01-21 1:27 ` Jaswinder Singh Rajput
2009-01-21 5:53 ` Size of sector_t in userspace [Was: fix 41 'make headers_check' warnings] Sam Ravnborg
2009-01-21 8:21 ` Jens Axboe
2009-01-21 11:34 ` Sam Ravnborg
2009-01-18 22:39 ` [GIT PULL -tip] fix 41 'make headers_check' warnings Stephen Rothwell
2009-01-19 1:20 ` Sam Ravnborg
2009-01-18 22:50 ` Stephen Rothwell
2009-01-19 2:30 ` Jaswinder Singh Rajput
2009-01-19 3:53 ` Stephen Rothwell
2009-01-18 23:53 ` Stephen Rothwell
2009-01-19 2:31 ` Jaswinder Singh Rajput
2009-01-19 3:48 ` Stephen Rothwell
2009-01-19 5:16 ` Jaswinder Singh Rajput
2009-01-18 23:59 ` Stephen Rothwell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1232278013.3130.8.camel@localhost.localdomain \
--to=jaswinder@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=sam@ravnborg.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox