* [PATCH v3 2/2] ARM: dts: aspeed: asrock: Add ASRock X570D4U BMC
2023-12-02 0:38 [PATCH v3 0/2] ARM: dts: aspeed: asrock: Add ASRock X570D4U BMC Renze Nicolai
2023-12-02 0:38 ` [PATCH v3 1/2] dt-bindings: arm: aspeed: add Asrock X570D4U board Renze Nicolai
@ 2023-12-02 0:38 ` Renze Nicolai
2023-12-02 0:44 ` [PATCH v3 0/2] " Renze Nicolai
2023-12-06 6:46 ` Joel Stanley
3 siblings, 0 replies; 5+ messages in thread
From: Renze Nicolai @ 2023-12-02 0:38 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-kernel, linux-aspeed, arnd,
olof, soc, robh+dt, krzysztof.kozlowski+dt, joel, andrew, renze
This is a relatively low-cost AST2500-based Amd Ryzen 5000 Series
micro-ATX board that we hope can provide a decent platform for OpenBMC
development.
This initial device-tree provides the necessary configuration for
basic BMC functionality such as serial console, KVM support
and POST code snooping.
Signed-off-by: Renze Nicolai <renze@rnplus.nl>
---
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../dts/aspeed/aspeed-bmc-asrock-x570d4u.dts | 377 ++++++++++++++++++
2 files changed, 378 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index d3ac20e316d0..2205bd079d0c 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
aspeed-bmc-asrock-e3c246d4i.dtb \
aspeed-bmc-asrock-romed8hm3.dtb \
+ aspeed-bmc-asrock-x570d4u.dtb \
aspeed-bmc-bytedance-g220a.dtb \
aspeed-bmc-delta-ahe50dc.dtb \
aspeed-bmc-facebook-bletchley.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
new file mode 100644
index 000000000000..3c975bc41ae7
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Asrock Rack X570D4U BMC";
+ compatible = "asrock,x570d4u-bmc", "aspeed,ast2500";
+
+ aliases {
+ i2c40 = &i2c4mux0ch0;
+ i2c41 = &i2c4mux0ch1;
+ i2c42 = &i2c4mux0ch2;
+ i2c43 = &i2c4mux0ch3;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pci_memory: region@9a000000 {
+ no-map;
+ reg = <0x9a000000 0x00010000>; /* 64K */
+ };
+
+ video_engine_memory: jpegbuffer {
+ size = <0x02800000>; /* 40M */
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ /* led-heartbeat-n */
+ gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_HEARTBEAT;
+ linux,default-trigger = "timer";
+ };
+
+ led-1 {
+ /* led-fault-n */
+ gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_FAULT;
+ panic-indicator;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+ <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+ <&adc 10>, <&adc 11>, <&adc 12>;
+ };
+};
+
+&gpio {
+ status = "okay";
+ gpio-line-names =
+ /*A0-A3*/ "status-locatorled-n", "", "button-nmi-n", "",
+ /*A4-A7*/ "", "", "", "",
+ /*B0-B3*/ "input-bios-post-cmplt-n", "", "", "",
+ /*B4-B7*/ "", "", "", "",
+ /*C0-C3*/ "", "", "", "",
+ /*C4-C7*/ "", "", "control-locatorbutton", "",
+ /*D0-D3*/ "button-power", "control-power", "button-reset", "control-reset",
+ /*D4-D7*/ "", "", "", "",
+ /*E0-E3*/ "", "", "", "",
+ /*E4-E7*/ "", "", "", "",
+ /*F0-F3*/ "", "", "", "",
+ /*F4-F7*/ "", "", "", "",
+ /*G0-G3*/ "output-rtc-battery-voltage-read-enable", "input-id0", "input-id1", "input-id2",
+ /*G4-G7*/ "input-alert1-n", "input-alert2-n", "input-alert3-n", "",
+ /*H0-H3*/ "", "", "", "",
+ /*H4-H7*/ "input-mfg", "", "led-heartbeat-n", "input-caseopen",
+ /*I0-I3*/ "", "", "", "",
+ /*I4-I7*/ "", "", "", "",
+ /*J0-J3*/ "output-bmc-ready", "", "", "",
+ /*J4-J7*/ "", "", "", "",
+ /*K0-K3*/ "", "", "", "",
+ /*K4-K7*/ "", "", "", "",
+ /*L0-L3*/ "", "", "", "",
+ /*L4-L7*/ "", "", "", "",
+ /*M0-M3*/ "", "", "", "",
+ /*M4-M7*/ "", "", "", "",
+ /*N0-N3*/ "", "", "", "",
+ /*N4-N7*/ "", "", "", "",
+ /*O0-O3*/ "", "", "", "",
+ /*O4-O7*/ "", "", "", "",
+ /*P0-P3*/ "", "", "", "",
+ /*P4-P7*/ "", "", "", "",
+ /*Q0-Q3*/ "", "", "", "",
+ /*Q4-Q7*/ "", "", "", "",
+ /*R0-R3*/ "", "", "", "",
+ /*R4-R7*/ "", "", "", "",
+ /*S0-S3*/ "input-bmc-pchhot-n", "", "", "",
+ /*S4-S7*/ "", "", "", "",
+ /*T0-T3*/ "", "", "", "",
+ /*T4-T7*/ "", "", "", "",
+ /*U0-U3*/ "", "", "", "",
+ /*U4-U7*/ "", "", "", "",
+ /*V0-V3*/ "", "", "", "",
+ /*V4-V7*/ "", "", "", "",
+ /*W0-W3*/ "", "", "", "",
+ /*W4-W7*/ "", "", "", "",
+ /*X0-X3*/ "", "", "", "",
+ /*X4-X7*/ "", "", "", "",
+ /*Y0-Y3*/ "", "", "", "",
+ /*Y4-Y7*/ "", "", "", "",
+ /*Z0-Z3*/ "", "", "led-fault-n", "output-bmc-throttle-n",
+ /*Z4-Z7*/ "", "", "", "",
+ /*AA0-AA3*/ "input-cpu1-thermtrip-latch-n", "", "input-cpu1-prochot-n", "",
+ /*AA4-AC7*/ "", "", "", "",
+ /*AB0-AB3*/ "", "", "", "",
+ /*AB4-AC7*/ "", "", "", "",
+ /*AC0-AC3*/ "", "", "", "",
+ /*AC4-AC7*/ "", "", "", "";
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ label = "bmc";
+ m25p,fast-read;
+ spi-max-frequency = <10000000>;
+#include "openbmc-flash-layout-64.dtsi"
+ };
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+ nvmem-cells = <ð0_macaddress>;
+ nvmem-cell-names = "mac-address";
+};
+
+&mac1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii2_default &pinctrl_mdio2_default>;
+ use-ncsi;
+
+ nvmem-cells = <ð1_macaddress>;
+ nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+ /* SMBus on auxiliary panel header (AUX_PANEL1) */
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ w83773g@4c {
+ compatible = "nuvoton,w83773g";
+ reg = <0x4c>;
+ };
+};
+
+&i2c2 {
+ /* PSU SMBus (PSU_SMB1) */
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9545";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c4mux0ch0: i2c@0 {
+ /* SMBus on PCI express 16x slot */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c4mux0ch1: i2c@1 {
+ /* SMBus on PCI express 8x slot */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c4mux0ch2: i2c@2 {
+ /* Unknown */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c4mux0ch3: i2c@3 {
+ /* SMBus on PCI express 1x slot */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c7 {
+ /* FRU and SPD EEPROM SMBus */
+ status = "okay";
+
+ eeprom@57 {
+ compatible = "st,24c128", "atmel,24c128";
+ reg = <0x57>;
+ pagesize = <16>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eth0_macaddress: macaddress@3f80 {
+ reg = <0x3f80 6>;
+ };
+
+ eth1_macaddress: macaddress@3f88 {
+ reg = <0x3f88 6>;
+ };
+ };
+};
+
+&gfx {
+ status = "okay";
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&vhub {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&kcs3 {
+ aspeed,lpc-io-reg = <0xca2>;
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+&p2a {
+ status = "okay";
+ memory-region = <&pci_memory>;
+};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default
+ &pinctrl_pwm1_default
+ &pinctrl_pwm2_default
+ &pinctrl_pwm3_default
+ &pinctrl_pwm4_default
+ &pinctrl_pwm5_default>;
+
+ fan@0 {
+ /* FAN1 (4-pin) */
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan@1 {
+ /* FAN2 (4-pin) */
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan@2 {
+ /* FAN3 (4-pin) */
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan@3 {
+ /* FAN4 (6-pin) */
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0b>;
+ };
+
+ fan@4 {
+ /* FAN6 (6-pin) */
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0d>;
+ };
+
+ fan@5 {
+ /* FAN5 (6-pin) */
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0c>;
+ };
+};
+
+&adc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default
+ &pinctrl_adc1_default
+ &pinctrl_adc2_default
+ &pinctrl_adc3_default
+ &pinctrl_adc4_default
+ &pinctrl_adc5_default
+ &pinctrl_adc6_default
+ &pinctrl_adc7_default
+ &pinctrl_adc8_default
+ &pinctrl_adc9_default
+ &pinctrl_adc10_default
+ &pinctrl_adc11_default
+ &pinctrl_adc12_default
+ &pinctrl_adc13_default
+ &pinctrl_adc14_default
+ &pinctrl_adc15_default>;
+};
--
2.43.0
^ permalink raw reply related [flat|nested] 5+ messages in thread