From: Borislav Petkov <petkovbb@googlemail.com>
To: <bzolnier@gmail.com>
Cc: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org,
Borislav Petkov <petkovbb@gmail.com>
Subject: [PATCH 09/10] ide-probe: use flags query macros
Date: Sun, 15 Feb 2009 13:08:11 +0100 [thread overview]
Message-ID: <1234699692-9452-10-git-send-email-petkovbb@gmail.com> (raw)
In-Reply-To: <1234699692-9452-1-git-send-email-petkovbb@gmail.com>
Shorten some >80 lines while at it.
There should be no functionality change resulting from this patch.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-probe.c | 34 ++++++++++++++++++----------------
1 files changed, 18 insertions(+), 16 deletions(-)
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 203224c..5e8c6be 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -488,7 +488,7 @@ static u8 probe_for_drive(ide_drive_t *drive)
strcpy(m, "UNKNOWN");
/* skip probing? */
- if ((drive->dev_flags & IDE_DFLAG_NOPROBE) == 0) {
+ if (!ide_drv_noprobe(drive)) {
/* if !(success||timed-out) */
cmd = ATA_CMD_ID_ATA;
rc = do_probe(drive, cmd);
@@ -498,20 +498,22 @@ static u8 probe_for_drive(ide_drive_t *drive)
rc = do_probe(drive, cmd);
}
- if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
+ if (!ide_drv_present(drive))
goto out_free;
/* identification failed? */
- if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) {
+ if (!ide_drv_id_read(drive)) {
if (drive->media == ide_disk) {
- printk(KERN_INFO "%s: non-IDE drive, CHS=%d/%d/%d\n",
+ pr_info("%s: non-IDE drive, CHS=%d/%d/%d\n",
drive->name, drive->cyl,
drive->head, drive->sect);
} else if (drive->media == ide_cdrom) {
- printk(KERN_INFO "%s: ATAPI cdrom (?)\n", drive->name);
+ pr_info("%s: ATAPI cdrom (?)\n", drive->name);
} else {
/* nuke it */
- printk(KERN_WARNING "%s: Unknown device on bus refused identification. Ignoring.\n", drive->name);
+ pr_warning("%s: Unknown device on bus refused "
+ "identification, ignoring.\n",
+ drive->name);
drive->dev_flags &= ~IDE_DFLAG_PRESENT;
}
} else {
@@ -522,11 +524,11 @@ static u8 probe_for_drive(ide_drive_t *drive)
}
}
- if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
+ if (!ide_drv_present(drive))
goto out_free;
/* The drive wasn't being helpful. Add generic info only */
- if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) {
+ if (!ide_drv_id_read(drive)) {
generic_id(drive);
return 1;
}
@@ -625,8 +627,7 @@ static int ide_port_wait_ready(ide_hwif_t *hwif)
/* Now make sure both master & slave are ready */
ide_port_for_each_dev(i, drive, hwif) {
/* Ignore disks that we will not probe for later. */
- if ((drive->dev_flags & IDE_DFLAG_NOPROBE) == 0 ||
- (drive->dev_flags & IDE_DFLAG_PRESENT)) {
+ if (!ide_drv_noprobe(drive) || ide_drv_present(drive)) {
SELECT_DRIVE(drive);
hwif->tp_ops->set_irq(hwif, 1);
mdelay(2);
@@ -658,7 +659,7 @@ void ide_undecoded_slave(ide_drive_t *dev1)
{
ide_drive_t *dev0 = dev1->hwif->devices[0];
- if ((dev1->dn & 1) == 0 || (dev0->dev_flags & IDE_DFLAG_PRESENT) == 0)
+ if ((dev1->dn & 1) == 0 || !ide_drv_present(dev0))
return;
/* If the models don't match they are not the same product */
@@ -691,8 +692,8 @@ static int ide_probe_port(ide_hwif_t *hwif)
BUG_ON(hwif->present);
- if ((hwif->devices[0]->dev_flags & IDE_DFLAG_NOPROBE) &&
- (hwif->devices[1]->dev_flags & IDE_DFLAG_NOPROBE))
+ if (ide_drv_noprobe(hwif->devices[0]) &&
+ ide_drv_noprobe(hwif->devices[1]))
return -EACCES;
/*
@@ -704,7 +705,8 @@ static int ide_probe_port(ide_hwif_t *hwif)
disable_irq(hwif->irq);
if (ide_port_wait_ready(hwif) == -EBUSY)
- printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name);
+ pr_debug("%s: Wait for ready failed before probe!\n",
+ hwif->name);
/*
* Second drive should only exist if first drive was found,
@@ -712,7 +714,7 @@ static int ide_probe_port(ide_hwif_t *hwif)
*/
ide_port_for_each_dev(i, drive, hwif) {
(void) probe_for_drive(drive);
- if (drive->dev_flags & IDE_DFLAG_PRESENT)
+ if (ide_drv_present(drive))
rc = 0;
}
@@ -874,7 +876,7 @@ static struct kobject *ata_probe(dev_t dev, int *part, void *data)
int unit = *part >> PARTN_BITS;
ide_drive_t *drive = hwif->devices[unit];
- if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
+ if (!ide_drv_present(drive))
return NULL;
if (drive->media == ide_disk)
--
1.6.0.4
next prev parent reply other threads:[~2009-02-15 12:09 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-15 12:08 [PATCH 0/10] ide: flags query macros Borislav Petkov
2009-02-15 12:08 ` [PATCH 01/10] ide: add " Borislav Petkov
2009-02-15 13:35 ` Sam Ravnborg
2009-02-15 18:01 ` Borislav Petkov
2009-02-15 20:51 ` Sam Ravnborg
2009-02-16 21:07 ` Bartlomiej Zolnierkiewicz
2009-02-15 12:08 ` [PATCH 02/10] ide-cd: use " Borislav Petkov
2009-02-15 12:08 ` [PATCH 03/10] ide-floppy: " Borislav Petkov
2009-02-15 12:08 ` [PATCH 04/10] ide-tape: " Borislav Petkov
2009-02-15 12:08 ` [PATCH 05/10] ide-atapi: " Borislav Petkov
2009-02-15 12:08 ` [PATCH 06/10] ide-disk: " Borislav Petkov
2009-02-15 12:08 ` [PATCH 07/10] ide-devsets: " Borislav Petkov
2009-02-15 12:08 ` [PATCH 08/10] ide-eh: " Borislav Petkov
2009-02-15 12:08 ` Borislav Petkov [this message]
2009-02-15 12:08 ` [PATCH 10/10] ide: use flags query macros in the remaining ide code Borislav Petkov
2009-02-16 22:17 ` [PATCH 0/10] ide: flags query macros Bartlomiej Zolnierkiewicz
2009-02-17 14:33 ` Bartlomiej Zolnierkiewicz
2009-02-23 7:04 ` Borislav Petkov
2009-02-23 7:34 ` Sam Ravnborg
2009-02-23 8:25 ` Borislav Petkov
2009-02-26 21:35 ` Bartlomiej Zolnierkiewicz
2009-02-27 6:38 ` Borislav Petkov
2009-02-27 8:21 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1234699692-9452-10-git-send-email-petkovbb@gmail.com \
--to=petkovbb@googlemail.com \
--cc=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=petkovbb@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox