From: Bryan Wu <cooloney@kernel.org>
To: alan@lxorguk.ukuu.org.uk
Cc: linux-kernel@vger.kernel.org, Philippe Gerum <rpm@xenomai.org>,
Bryan Wu <cooloney@kernel.org>
Subject: [PATCH 15/18] Blackfin Serial Driver: merge the upstream adeos/xenomai
Date: Fri, 6 Mar 2009 14:42:57 +0800 [thread overview]
Message-ID: <1236321780-28718-16-git-send-email-cooloney@kernel.org> (raw)
In-Reply-To: <1236321780-28718-1-git-send-email-cooloney@kernel.org>
From: Philippe Gerum <rpm@xenomai.org>
add ipipe serial debug function for adeos
Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
drivers/serial/bfin_5xx.c | 45 +++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 45 insertions(+), 0 deletions(-)
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 71a9e6b..8aa0e37 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -1145,6 +1145,51 @@ static void bfin_serial_console_putchar(struct uart_port *port, int ch)
SSYNC();
}
+#ifdef CONFIG_IPIPE
+
+#include <stdarg.h>
+
+void __ipipe_serial_debug(const char *fmt, ...)
+{
+ struct bfin_serial_port *uart = &bfin_serial_ports[0];
+ unsigned short status, tmp;
+ int flags, i, count;
+ char buf[128];
+ va_list ap;
+
+ va_start(ap, fmt);
+ vsprintf(buf, fmt, ap);
+ va_end(ap);
+ count = strlen(buf);
+
+ local_irq_save_hw(flags);
+
+ for (i = 0; i < count; i++) {
+ do {
+ status = UART_GET_LSR(uart);
+ } while (!(status & THRE));
+
+#ifndef CONFIG_BF54x
+ tmp = UART_GET_LCR(uart);
+ tmp &= ~DLAB;
+ UART_PUT_LCR(uart, tmp);
+#endif
+
+ UART_PUT_CHAR(uart, buf[i]);
+ if (buf[i] == '\n') {
+ do {
+ status = UART_GET_LSR(uart);
+ } while (!(status & THRE));
+ UART_PUT_CHAR(uart, '\r');
+ }
+ }
+
+ local_irq_restore_hw(flags);
+}
+EXPORT_SYMBOL(__ipipe_serial_debug);
+
+#endif /* CONFIG_IPIPE */
+
/*
* Interrupts are disabled on entering
*/
--
1.5.6.3
next prev parent reply other threads:[~2009-03-06 6:45 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-06 6:42 [PATCH 00/18] Blackfin Serial Driver bug fixing and update Bryan Wu
2009-03-06 6:42 ` [PATCH 01/18] Blackfin Serial Driver: Add a debug function to serial driver Bryan Wu
2009-03-06 22:37 ` Andrew Morton
2009-03-06 6:42 ` [PATCH 02/18] Blackfin Serial Driver: use barrier instead of cpu_relax for Blackfin SMP like patch Bryan Wu
2009-03-06 22:37 ` Andrew Morton
2009-03-10 10:07 ` gyang
2009-03-10 10:25 ` Mike Frysinger
2009-03-10 16:48 ` Andrew Morton
2009-03-11 9:50 ` graff yang
2009-03-11 16:48 ` Andrew Morton
2009-03-06 6:42 ` [PATCH 03/18] Blackfin Serial Driver: fix a in dma circle rx buffer handling Bryan Wu
2009-03-06 22:38 ` Andrew Morton
2009-03-06 6:42 ` [PATCH 04/18] Blackfin Serial Driver: Change hardware flowcontrol from poll to interrupt driven Bryan Wu
2009-03-06 22:38 ` Andrew Morton
2009-03-06 22:49 ` Mike Frysinger
2009-03-06 23:00 ` Andrew Morton
2009-03-06 6:42 ` [PATCH 05/18] Blackfin Serial Driver: fix bug - serial port transfer big file from host to target would have more lines Bryan Wu
2009-03-06 22:38 ` Andrew Morton
2009-03-06 6:42 ` [PATCH 06/18] Blackfin Serial Driver: explain why we cannot cpu_relax() in early serial code Bryan Wu
2009-03-06 22:38 ` Andrew Morton
2009-03-06 6:42 ` [PATCH 07/18] Blackfin Serial Driver: BF538/9 Linux kernel Support Bryan Wu
2009-03-06 6:42 ` [PATCH 08/18] Blackfin Serial Driver: use "unsigned long" for flags with irq functions rather than "int" Bryan Wu
2009-03-06 6:42 ` [PATCH 09/18] Blackfin Serial Driver: irq funcs take an unsigned long for flags Bryan Wu
2009-03-06 6:42 ` [PATCH 10/18] Blackfin Serial Driver: fix compile error in PIO mode Bryan Wu
2009-03-06 6:42 ` [PATCH 11/18] Blackfin Serial Driver: update KGDB UART config name Bryan Wu
2009-03-06 6:42 ` [PATCH 12/18] Blackfin Serial Driver: fix building when debug is enabled but serial console is disabled Bryan Wu
2009-03-06 6:42 ` [PATCH 13/18] Blackfin Serial Driver: depend on KGDB_SERIAL_CONSOLE being set to N Bryan Wu
2009-03-06 6:42 ` [PATCH 14/18] Blackfin Serial Driver: use the DLAB macro to hide variant differences Bryan Wu
2009-03-06 22:38 ` Andrew Morton
2009-03-06 22:41 ` Mike Frysinger
2009-03-06 6:42 ` Bryan Wu [this message]
2009-03-06 22:38 ` [PATCH 15/18] Blackfin Serial Driver: merge the upstream adeos/xenomai Andrew Morton
2009-03-06 22:43 ` Mike Frysinger
2009-03-06 6:42 ` [PATCH 16/18] Blackfin Serial Driver: fix bug - up arrow key works abnormal for bf561 ezkit board Bryan Wu
2009-03-06 6:42 ` [PATCH 17/18] Blackfin Serial Driver: Fix bug - Enable hardware based CTS and RTS for bf548 Bryan Wu
2009-03-06 22:38 ` Andrew Morton
2009-03-06 6:43 ` [PATCH 18/18] Blackfin Serial Driver: update path to gpio header Bryan Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1236321780-28718-16-git-send-email-cooloney@kernel.org \
--to=cooloney@kernel.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=rpm@xenomai.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox