From: Jaswinder Singh Rajput <jaswinder@kernel.org>
To: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>,
x86 maintainers <x86@kernel.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: Re: [git-pull -tip V2] x86: cpu architecture debug code
Date: Wed, 11 Mar 2009 19:13:49 +0530 [thread overview]
Message-ID: <1236779029.2836.33.camel@ht.satnam> (raw)
In-Reply-To: <20090311131321.GC1074@elte.hu>
On Wed, 2009-03-11 at 14:13 +0100, Ingo Molnar wrote:
> * Ingo Molnar <mingo@elte.hu> wrote:
>
> > * Jaswinder Singh Rajput <jaswinder@kernel.org> wrote:
> >
> > > @@ -472,7 +473,7 @@ static void print_dt(void *seq)
> > > print_desc_ptr("GDT", seq, dt);
> > >
> > > /* LDT */
> > > - store_ldt(ldt);
> > > + asm volatile("sldt %0" : "=m" (ldt));
> >
> > this is still wrong.
>
> As i pointed it out before, we should not open-code an assembly
> primitive - especially since store_ldt() is available in
> arch/x86/include/asm/desc.h.
>
> True, that primitive is not available on CONFIG_PARAVIRT, but
> that is a bug: the fix is to move the store_ldt() definition
> outside the CONFIG_PARAVIRT section in desc.h, not to hack
> around the problem by open-coding assembly code.
>
> I.e. dont let an uncleanliness and incomplete primitive spread
> to other code. Fix the primitive and remove the uncleanliness
> that way.
>
The following changes since commit 259ef6fcea4046fe24495b1e3631c1b905c531c1:
Jaswinder Singh Rajput (1):
x86: cpu architecture debug code
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jaswinder/linux-2.6-tip-cpu.git master
Jaswinder Singh Rajput (2):
x86: cpu_debug.c cleanup
x86: move store_ldt outside the CONFIG_PARAVIRT section
arch/x86/include/asm/desc.h | 3 ++-
arch/x86/kernel/cpu/cpu_debug.c | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
Complete diff:
diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h
index dc27705..ceb17cc 100644
--- a/arch/x86/include/asm/desc.h
+++ b/arch/x86/include/asm/desc.h
@@ -91,7 +91,6 @@ static inline int desc_empty(const void *ptr)
#define store_gdt(dtr) native_store_gdt(dtr)
#define store_idt(dtr) native_store_idt(dtr)
#define store_tr(tr) (tr = native_store_tr())
-#define store_ldt(ldt) asm("sldt %0":"=m" (ldt))
#define load_TLS(t, cpu) native_load_tls(t, cpu)
#define set_ldt native_set_ldt
@@ -112,6 +111,8 @@ static inline void paravirt_free_ldt(struct desc_struct *ldt, unsigned entries)
}
#endif /* CONFIG_PARAVIRT */
+#define store_ldt(ldt) asm("sldt %0":"=m" (ldt))
+
static inline void native_write_idt_entry(gate_desc *idt, int entry,
const gate_desc *gate)
{
diff --git a/arch/x86/kernel/cpu/cpu_debug.c b/arch/x86/kernel/cpu/cpu_debug.c
index 0bdf4da..9abbcbd 100755
--- a/arch/x86/kernel/cpu/cpu_debug.c
+++ b/arch/x86/kernel/cpu/cpu_debug.c
@@ -23,6 +23,7 @@
#include <linux/smp.h>
#include <asm/cpu_debug.h>
+#include <asm/paravirt.h>
#include <asm/system.h>
#include <asm/traps.h>
#include <asm/apic.h>
@@ -427,7 +428,7 @@ static void print_tss(void *arg)
seq_printf(seq, " CS\t: %04x\n", seg);
asm("movl %%ds,%0" : "=r" (seg));
seq_printf(seq, " DS\t: %04x\n", seg);
- seq_printf(seq, " SS\t: %04lx\n", regs->ss);
+ seq_printf(seq, " SS\t: %04lx\n", regs->ss & 0xffff);
asm("movl %%es,%0" : "=r" (seg));
seq_printf(seq, " ES\t: %04x\n", seg);
asm("movl %%fs,%0" : "=r" (seg));
next prev parent reply other threads:[~2009-03-11 13:44 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-10 11:23 [git-pull -tip V2] x86: cpu architecture debug code Jaswinder Singh Rajput
2009-03-10 12:28 ` Ingo Molnar
2009-03-10 15:09 ` Jaswinder Singh Rajput
2009-03-10 15:20 ` Ingo Molnar
2009-03-10 16:09 ` Jaswinder Singh Rajput
2009-03-10 17:45 ` Ingo Molnar
2009-03-10 23:55 ` Jaswinder Singh Rajput
2009-03-11 10:53 ` Ingo Molnar
2009-03-11 11:25 ` Jaswinder Singh Rajput
2009-03-11 11:34 ` Ingo Molnar
2009-03-13 7:34 ` Jeremy Fitzhardinge
2009-03-13 8:07 ` Jaswinder Singh Rajput
2009-03-11 11:54 ` Jaswinder Singh Rajput
2009-03-11 12:45 ` Jaswinder Singh Rajput
2009-03-11 12:50 ` Ingo Molnar
2009-03-11 13:13 ` Ingo Molnar
2009-03-11 13:43 ` Jaswinder Singh Rajput [this message]
2009-03-11 13:48 ` Ingo Molnar
2009-03-13 7:37 ` Jeremy Fitzhardinge
2009-03-10 17:48 ` [tip:x86/debug] " Jaswinder Singh Rajput
2009-03-10 19:53 ` [git-pull -tip V2] " Valdis.Kletnieks
2009-03-10 22:00 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1236779029.2836.33.camel@ht.satnam \
--to=jaswinder@kernel.org \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox