From: Soeren Sonnenburg <sonne@debian.org>
To: Sitsofe Wheeler <sitsofe@yahoo.com>
Cc: linux-kernel@vger.kernel.org, Eric Anholt <eric@anholt.net>,
dri-devel@lists.sourceforge.net,
Jesse Barnes <jbarnes@virtuousgeek.org>
Subject: Re: enabling kms for i915 disables brightness control and xrandr
Date: Mon, 30 Mar 2009 15:37:19 +0200 [thread overview]
Message-ID: <1238420239.4575.2.camel@localhost> (raw)
In-Reply-To: <1238332957.4185.74.camel@localhost>
On Sun, 2009-03-29 at 15:22 +0200, Soeren Sonnenburg wrote:
> On Sun, 2009-03-29 at 14:07 +0100, Sitsofe Wheeler wrote:
> > (CC'ing dri-devel, Eric Anholt and Jesse Barnes)
> >
> > On Sun, Mar 29, 2009 at 12:34:01PM +0200, Soeren Sonnenburg wrote:
> > > Dear all,
> > >
> > > I am not sure if this is just a user error/ too old userspace problem,
> >
> > [User stated that 2.6.3 intel driver is being used in another email]
>
> Just to not cause any (further?) confusion, I was using 2.6.1 when I
> wrote that email and after compiling/upgrading to 2.6.3 a number of
> problems vanished (like Xv works, screen resolution is correct, things
> are *a lot* faster with UXA). However, brightness still only works via
> setpci and xrandr only shows the 1024x600 modeline.
>
> > > but I recognized that when I enable kernel based modesetting on a intel
> > > 945 based samsung nc 10 netbook, I loose brightness control from within
> > > X and X resolutions are wrong (instead of 1024x600 it is 1024x1024) and
> > > xrandr does no longer have the all the modelines ranging from 1024x600
> > > to 640x350... Trying to change resolutions / setting the brightness via
> > > xrandr results in error messages being printed.
> > >
> > > Furthermore, this same flag disables Xv support..
> > >
> > > However, screen switches between terminal and X are quite fast now
> > > (without any flicker) and suspend and everything works stably.
> > >
> > > I recognized that I can set the brightness via
> > >
> > > setpci -s 00:02.1 F4.B=XX
> > >
> > > (XX ranging from 00 to FF) just fine...
One more thing: Connecting an external display I could turn it on via
xrandr --auto successfully. However, it was not possible to turn the
internal display off (xrandr --output LVDS1 --off) and switching to the
console with the external display connected I managed to freeze the
machine. Turning the external display off worked somehow (the display
then showed vertical stripes) but I could switch to console.
Soeren.
--
For the one fact about the future of which we can be certain is that it
will be utterly fantastic. -- Arthur C. Clarke, 1962
next prev parent reply other threads:[~2009-03-30 13:37 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-29 10:34 enabling kms for i915 disables brightness control and xrandr Soeren Sonnenburg
2009-03-29 11:01 ` Sitsofe Wheeler
2009-03-29 12:00 ` Soeren Sonnenburg
2009-03-31 21:58 ` Eric Anholt
2009-03-29 13:07 ` Sitsofe Wheeler
2009-03-29 13:22 ` Soeren Sonnenburg
2009-03-30 13:37 ` Soeren Sonnenburg [this message]
2009-03-30 21:34 ` Jesse Barnes
2009-03-30 22:57 ` Soeren Sonnenburg
2009-03-30 23:00 ` Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1238420239.4575.2.camel@localhost \
--to=sonne@debian.org \
--cc=dri-devel@lists.sourceforge.net \
--cc=eric@anholt.net \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sitsofe@yahoo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox