From: Daniel Mack <daniel@caiaq.de>
To: linux-kernel@vger.kernel.org
Cc: Daniel Mack <daniel@caiaq.de>,
Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>,
Matt Reimer <mreimer@vpop.net>, Anton Vorontsov <cbou@mail.ru>
Subject: [PATCH 3/3] w1: ds2760_battery: add support for sleep mode feature
Date: Tue, 28 Apr 2009 10:55:02 +0200 [thread overview]
Message-ID: <1240908902-24646-3-git-send-email-daniel@caiaq.de> (raw)
In-Reply-To: <1240908902-24646-2-git-send-email-daniel@caiaq.de>
This adds support for ds2760's sleep mode feature. With this feature
enabled, the chip enters a deep sleep mode and disconnects from the
battery when the w1 line is held down for more than 2 seconds.
This new behaviour can be switched on and off using a new module
parameter.
Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
Cc: Matt Reimer <mreimer@vpop.net>
Cc: Anton Vorontsov <cbou@mail.ru>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
---
drivers/power/ds2760_battery.c | 26 ++++++++++++++++++++++++++
drivers/w1/slaves/w1_ds2760.h | 5 +++++
2 files changed, 31 insertions(+), 0 deletions(-)
diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c
index 9331009..520b5c4 100644
--- a/drivers/power/ds2760_battery.c
+++ b/drivers/power/ds2760_battery.c
@@ -62,6 +62,10 @@ static unsigned int cache_time = 1000;
module_param(cache_time, uint, 0644);
MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
+static unsigned int pmod_enabled;
+module_param(pmod_enabled, bool, 0644);
+MODULE_PARM_DESC(pmod_enabled, "PMOD enable bit");
+
/* Some batteries have their rated capacity stored a N * 10 mAh, while
* others use an index into this table. */
static int rated_capacities[] = {
@@ -259,6 +263,17 @@ static void ds2760_battery_update_status(struct ds2760_device_info *di)
power_supply_changed(&di->bat);
}
+static void ds2760_battery_write_status(struct ds2760_device_info *di,
+ char status)
+{
+ if (status == di->raw[DS2760_STATUS_REG])
+ return;
+
+ w1_ds2760_write(di->w1_dev, &status, DS2760_STATUS_WRITE_REG, 1);
+ w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
+ w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
+}
+
static void ds2760_battery_work(struct work_struct *work)
{
struct ds2760_device_info *di = container_of(work,
@@ -342,6 +357,7 @@ static enum power_supply_property ds2760_battery_props[] = {
static int ds2760_battery_probe(struct platform_device *pdev)
{
+ char status;
int retval = 0;
struct ds2760_device_info *di;
@@ -371,6 +387,16 @@ static int ds2760_battery_probe(struct platform_device *pdev)
goto batt_failed;
}
+ /* enable sleep mode feature */
+ ds2760_battery_read_status(di);
+ status = di->raw[DS2760_STATUS_REG];
+ if (pmod_enabled)
+ status |= DS2760_STATUS_PMOD;
+ else
+ status &= ~DS2760_STATUS_PMOD;
+
+ ds2760_battery_write_status(di, status);
+
INIT_DELAYED_WORK(&di->monitor_work, ds2760_battery_work);
di->monitor_wqueue = create_singlethread_workqueue(dev_name(&pdev->dev));
if (!di->monitor_wqueue) {
diff --git a/drivers/w1/slaves/w1_ds2760.h b/drivers/w1/slaves/w1_ds2760.h
index ea39419..58e7741 100644
--- a/drivers/w1/slaves/w1_ds2760.h
+++ b/drivers/w1/slaves/w1_ds2760.h
@@ -25,6 +25,10 @@
#define DS2760_PROTECTION_REG 0x00
#define DS2760_STATUS_REG 0x01
+ #define DS2760_STATUS_IE (1 << 2)
+ #define DS2760_STATUS_SWEN (1 << 3)
+ #define DS2760_STATUS_RNAOP (1 << 4)
+ #define DS2760_STATUS_PMOD (1 << 5)
#define DS2760_EEPROM_REG 0x07
#define DS2760_SPECIAL_FEATURE_REG 0x08
#define DS2760_VOLTAGE_MSB 0x0c
@@ -38,6 +42,7 @@
#define DS2760_EEPROM_BLOCK0 0x20
#define DS2760_ACTIVE_FULL 0x20
#define DS2760_EEPROM_BLOCK1 0x30
+#define DS2760_STATUS_WRITE_REG 0x31
#define DS2760_RATED_CAPACITY 0x32
#define DS2760_CURRENT_OFFSET_BIAS 0x33
#define DS2760_ACTIVE_EMPTY 0x3b
--
1.6.2.1
next prev parent reply other threads:[~2009-04-28 8:56 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-28 8:55 [PATCH 1/3] w1: ds2760_battery: cleanups in ds2760_battery_probe() Daniel Mack
2009-04-28 8:55 ` [PATCH 2/3] w1: ds2760: add support for EEPROM read and write Daniel Mack
2009-04-28 8:55 ` Daniel Mack [this message]
2009-04-28 15:03 ` [PATCH 3/3] w1: ds2760_battery: add support for sleep mode feature Anton Vorontsov
2009-04-28 17:11 ` Matt Reimer
2009-04-28 10:22 ` [PATCH 2/3] w1: ds2760: add support for EEPROM read and write Daniel Mack
2009-04-28 15:01 ` Anton Vorontsov
2009-04-28 16:33 ` Evgeniy Polyakov
2009-04-28 17:11 ` Matt Reimer
2009-04-28 17:10 ` [PATCH 1/3] w1: ds2760_battery: cleanups in ds2760_battery_probe() Matt Reimer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1240908902-24646-3-git-send-email-daniel@caiaq.de \
--to=daniel@caiaq.de \
--cc=cbou@mail.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=mreimer@vpop.net \
--cc=szabolcs.gyurko@tlt.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox