From: Jaswinder Singh Rajput <jaswinder@kernel.org>
To: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@kernel.org>,
Robert Richter <robert.richter@amd.com>,
Dave Jones <davej@redhat.com>,
LKML <linux-kernel@vger.kernel.org>,
x86 maintainers <x86@kernel.org>
Subject: [PATCH 3/10 -tip] x86: Add cpufeatures for Advanced Power Management
Date: Tue, 12 May 2009 21:09:13 +0530 [thread overview]
Message-ID: <1242142753.2547.16.camel@ht.satnam> (raw)
In-Reply-To: <1242142692.2547.15.camel@ht.satnam>
Add Advanced Power Management (Function 8000_0007h), edx
/proc/cpuinfo (before)
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc pni cx16
lahf_lm cmp_legacy svm extapic cr8_legacy 3dnowprefetch osvw skinit pname
/proc/cpuinfo (after)
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
rdtscp lm 3dnowext 3dnow rep_good tsc_reliable nonstop_tsc pni cx16
lahf_lm cmp_legacy svm extapic cr8_legacy 3dnowprefetch osvw skinit pname
ts ttp htc stc 100mhzsteps hwpstate constant_tsc
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
arch/x86/include/asm/cpufeature.h | 14 ++++++++++++--
arch/x86/kernel/cpu/common.c | 10 ++++++----
2 files changed, 18 insertions(+), 6 deletions(-)
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index e1a4cc4..d37ab0f 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -6,7 +6,7 @@
#include <asm/required-features.h>
-#define NCAPINTS 9 /* N 32-bit words worth of info */
+#define NCAPINTS 10 /* N 32-bit words worth of info */
/*
* Note: If the comment begins with a quoted string, that string is used
@@ -76,7 +76,6 @@
#define X86_FEATURE_K7 (3*32+ 5) /* "" Athlon */
#define X86_FEATURE_P3 (3*32+ 6) /* "" P3 */
#define X86_FEATURE_P4 (3*32+ 7) /* "" P4 */
-#define X86_FEATURE_CONSTANT_TSC (3*32+ 8) /* TSC ticks at a constant rate */
#define X86_FEATURE_UP (3*32+ 9) /* smp kernel running on up */
#define X86_FEATURE_FXSAVE_LEAK (3*32+10) /* "" FXSAVE leaks FOP/FIP/FOP */
#define X86_FEATURE_ARCH_PERFMON (3*32+11) /* Intel Architectural PerfMon */
@@ -164,6 +163,17 @@
#define X86_FEATURE_EPT (8*32+ 3) /* Intel Extended Page Table */
#define X86_FEATURE_VPID (8*32+ 4) /* Intel Virtual Processor ID */
+/* Advanced Power Management (Function 8000_0007h), edx */
+#define X86_FEATURE_TS (9*32+ 0) /* Temperatue sensor */
+#define X86_FEATURE_FID (9*32+ 1) /* Frequency ID control */
+#define X86_FEATURE_VID (9*32+ 2) /* Voltage ID control */
+#define X86_FEATURE_TTP (9*32+ 3) /* Thermal trip */
+#define X86_FEATURE_HTC (9*32+ 4) /* Hardware thermal control */
+#define X86_FEATURE_STC (9*32+ 5) /* Software thermal control */
+#define X86_FEATURE_100MHZSTEPS (9*32+ 6) /* 100 MHz multiplier control */
+#define X86_FEATURE_HWPSTATE (9*32+ 7) /* Hardware P-State control */
+#define X86_FEATURE_CONSTANT_TSC (9*32+ 8) /* Constant rate TSC ticks */
+
#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
#include <linux/bitops.h>
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 3994feb..a428b36 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -573,6 +573,12 @@ static void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c)
if (c->extended_cpuid_level >= 0x80000004)
set_cpu_cap(c, X86_FEATURE_PNAME);
+ /* Advanced Power Management (Function 8000_0007h), edx */
+ if (c->extended_cpuid_level >= 0x80000007){
+ c->x86_capability[9] = cpuid_edx(0x80000007);
+ c->x86_power = cpuid_edx(0x80000007);
+ }
+
if (c->extended_cpuid_level >= 0x80000008) {
u32 eax = cpuid_eax(0x80000008);
@@ -583,10 +589,6 @@ static void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c)
else if (cpu_has(c, X86_FEATURE_PAE) || cpu_has(c, X86_FEATURE_PSE36))
c->x86_phys_bits = 36;
#endif
-
- if (c->extended_cpuid_level >= 0x80000007)
- c->x86_power = cpuid_edx(0x80000007);
-
}
static void __cpuinit identify_cpu_without_cpuid(struct cpuinfo_x86 *c)
--
1.6.0.6
next prev parent reply other threads:[~2009-05-12 15:47 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-12 15:35 [git-pull -tip][PATCH 0/10] few cpufeature additions and users Jaswinder Singh Rajput
2009-05-12 15:37 ` [PATCH 1/10 -tip] x86: Add cpufeature for Processor Name Jaswinder Singh Rajput
2009-05-12 15:38 ` [PATCH 2/10 -tip] x86: get_model_name() user of X86_FEATURE_PNAME Jaswinder Singh Rajput
2009-05-12 15:39 ` Jaswinder Singh Rajput [this message]
2009-05-12 15:40 ` [PATCH 4/10 -tip] x86: check_powernow() for K7 user of Advanced Power Management features Jaswinder Singh Rajput
2009-05-12 15:40 ` [PATCH 5/10 -tip] x86: check_powernow() for K8 and later " Jaswinder Singh Rajput
2009-05-12 15:41 ` [PATCH 6/10 -tip] x86: early_init_intel() " Jaswinder Singh Rajput
2009-05-12 15:42 ` [PATCH 7/10 -tip] x86: early_init_amd() " Jaswinder Singh Rajput
2009-05-12 15:43 ` [PATCH 8/10 -tip] x86: Add cpufeature for Microcode update Jaswinder Singh Rajput
2009-05-12 15:44 ` [PATCH 9/10 -tip] x86: collect_cpu_info() of Intel user of Microcode feature Jaswinder Singh Rajput
2009-05-12 15:44 ` [PATCH 10/10 -tip] x86: collect_cpu_info() of AMD " Jaswinder Singh Rajput
2009-05-13 5:47 ` Andreas Herrmann
2009-05-13 7:20 ` Jaswinder Singh Rajput
2009-05-13 5:46 ` [PATCH 8/10 -tip] x86: Add cpufeature for Microcode update Andreas Herrmann
2009-05-13 7:18 ` Jaswinder Singh Rajput
2009-05-13 6:18 ` [PATCH 6/10 -tip] x86: early_init_intel() user of Advanced Power Management features Andreas Herrmann
2009-05-13 7:20 ` Jaswinder Singh Rajput
2009-05-12 17:48 ` [PATCH 5/10 -tip] x86: check_powernow() for K8 and later " Ingo Molnar
2009-05-12 18:45 ` Jaswinder Singh Rajput
2009-05-13 6:36 ` Andreas Herrmann
2009-05-12 19:07 ` [PATCH 4/10 -tip] x86: check_powernow() for K7 " Jaswinder Singh Rajput
2009-05-12 19:06 ` [PATCH 3/10 -tip] x86: Add cpufeatures for Advanced Power Management Jaswinder Singh Rajput
2009-05-12 21:04 ` Thomas Gleixner
2009-05-13 8:57 ` Jaswinder Singh Rajput
2009-05-15 13:47 ` Jaswinder Singh Rajput
2009-05-17 12:17 ` Thomas Gleixner
2009-05-17 14:18 ` Jaswinder Singh Rajput
2009-05-19 15:01 ` Jaswinder Singh Rajput
2009-05-19 16:41 ` H. Peter Anvin
2009-05-20 7:15 ` Jaswinder Singh Rajput
2009-05-20 7:23 ` Jaswinder Singh Rajput
2009-05-20 18:30 ` H. Peter Anvin
2009-05-21 5:09 ` Jaswinder Singh Rajput
2009-05-13 6:27 ` Andreas Herrmann
2009-05-21 6:14 ` H. Peter Anvin
2009-05-21 6:11 ` [PATCH 1/10 -tip] x86: Add cpufeature for Processor Name H. Peter Anvin
2009-05-21 7:38 ` Jaswinder Singh Rajput
2009-05-21 20:09 ` H. Peter Anvin
2009-05-12 20:15 ` [git-pull -tip][PATCH 0/10] few cpufeature additions and users Jaswinder Singh Rajput
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1242142753.2547.16.camel@ht.satnam \
--to=jaswinder@kernel.org \
--cc=davej@redhat.com \
--cc=hpa@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=robert.richter@amd.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox