linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
To: Avi Kivity <avi@redhat.com>, Ingo Molnar <mingo@elte.hu>
Cc: x86 maintainers <x86@kernel.org>,
	"kvm@vger.kernel.org" <kvm@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Andi Kleen <andi@firstfloor.org>
Subject: Re: [PATCH -tip] x86: kvm replace MSR_IA32_TIME_STAMP_COUNTER with MSR_IA32_TSC of msr-index.h
Date: Fri, 15 May 2009 18:42:05 +0530	[thread overview]
Message-ID: <1242393125.3082.4.camel@localhost.localdomain> (raw)
In-Reply-To: <1242282442.4574.11.camel@localhost.localdomain>

Hello Avi,

On Thu, 2009-05-14 at 11:57 +0530, Jaswinder Singh Rajput wrote:
> Use standard msr-index.h's MSR declaration.
> 
> MSR_IA32_TSC is better than MSR_IA32_TIME_STAMP_COUNTER as it also solves
> 80 column issue.
> 
> Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
> ---

If this patch looks sane to you can apply in kvm tree.

Here is the updated patch based on kvm tree:

[PATCH] x86: kvm replace MSR_IA32_TIME_STAMP_COUNTER with MSR_IA32_TSC of msr-index.h

Use standard msr-index.h's MSR declaration.

MSR_IA32_TSC is better than MSR_IA32_TIME_STAMP_COUNTER as it also solves
80 column issue.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/x86/include/asm/kvm_host.h |    2 --
 arch/x86/kvm/svm.c              |    4 ++--
 arch/x86/kvm/vmx.c              |    4 ++--
 arch/x86/kvm/x86.c              |    5 ++---
 4 files changed, 6 insertions(+), 9 deletions(-)

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 716a4ec..5c72897 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -753,8 +753,6 @@ static inline void kvm_inject_gp(struct kvm_vcpu *vcpu, u32 error_code)
 	kvm_queue_exception_e(vcpu, GP_VECTOR, error_code);
 }
 
-#define MSR_IA32_TIME_STAMP_COUNTER		0x010
-
 #define TSS_IOPB_BASE_OFFSET 0x66
 #define TSS_BASE_SIZE 0x68
 #define TSS_IOPB_SIZE (65536 / 8)
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 71510e0..dd667dd 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1953,7 +1953,7 @@ static int svm_get_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 *data)
 	struct vcpu_svm *svm = to_svm(vcpu);
 
 	switch (ecx) {
-	case MSR_IA32_TIME_STAMP_COUNTER: {
+	case MSR_IA32_TSC: {
 		u64 tsc;
 
 		rdtscll(tsc);
@@ -2043,7 +2043,7 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
 	struct vcpu_svm *svm = to_svm(vcpu);
 
 	switch (ecx) {
-	case MSR_IA32_TIME_STAMP_COUNTER: {
+	case MSR_IA32_TSC: {
 		u64 tsc;
 
 		rdtscll(tsc);
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index fe2ce2b..98e6915 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -931,7 +931,7 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata)
 	case MSR_EFER:
 		return kvm_get_msr_common(vcpu, msr_index, pdata);
 #endif
-	case MSR_IA32_TIME_STAMP_COUNTER:
+	case MSR_IA32_TSC:
 		data = guest_read_tsc();
 		break;
 	case MSR_IA32_SYSENTER_CS:
@@ -991,7 +991,7 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data)
 	case MSR_IA32_SYSENTER_ESP:
 		vmcs_writel(GUEST_SYSENTER_ESP, data);
 		break;
-	case MSR_IA32_TIME_STAMP_COUNTER:
+	case MSR_IA32_TSC:
 		rdtscll(host_tsc);
 		guest_write_tsc(data, host_tsc);
 		break;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 44e87a5..4150edb 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -462,7 +462,7 @@ static u32 msrs_to_save[] = {
 #ifdef CONFIG_X86_64
 	MSR_CSTAR, MSR_KERNEL_GS_BASE, MSR_SYSCALL_MASK, MSR_LSTAR,
 #endif
-	MSR_IA32_TIME_STAMP_COUNTER, MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK,
+	MSR_IA32_TSC, MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK,
 	MSR_IA32_PERF_STATUS, MSR_IA32_CR_PAT, MSR_VM_HSAVE_PA
 };
 
@@ -640,8 +640,7 @@ static void kvm_write_guest_time(struct kvm_vcpu *v)
 
 	/* Keep irq disabled to prevent changes to the clock */
 	local_irq_save(flags);
-	kvm_get_msr(v, MSR_IA32_TIME_STAMP_COUNTER,
-			  &vcpu->hv_clock.tsc_timestamp);
+	kvm_get_msr(v, MSR_IA32_TSC, &vcpu->hv_clock.tsc_timestamp);
 	ktime_get_ts(&ts);
 	local_irq_restore(flags);
 
-- 
1.6.1.1




  reply	other threads:[~2009-05-15 13:13 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-05-11  8:48 [PATCH -v3] KVM: MCE: Add MCE support to KVM Huang Ying
2009-05-11  9:05 ` Jaswinder Singh Rajput
2009-05-11  9:08   ` Huang Ying
2009-05-14  5:30     ` [PATCH -tip] x86: kvm/x86.c use MSR names in place of address Jaswinder Singh Rajput
2009-05-14  6:27       ` [PATCH -tip] x86: kvm replace MSR_IA32_TIME_STAMP_COUNTER with MSR_IA32_TSC of msr-index.h Jaswinder Singh Rajput
2009-05-15 13:12         ` Jaswinder Singh Rajput [this message]
2009-05-17 18:48           ` Avi Kivity
2009-05-20  8:12             ` Jaswinder Singh Rajput
2009-05-20 11:47               ` Avi Kivity
2009-05-15 13:13       ` [PATCH -tip] x86: kvm/x86.c use MSR names in place of address Jaswinder Singh Rajput
2009-05-17 18:57       ` Avi Kivity
2009-05-17 18:56 ` [PATCH -v3] KVM: MCE: Add MCE support to KVM Avi Kivity
2009-05-25 17:40   ` Jan Kiszka
2009-05-25 18:09     ` Avi Kivity
2009-05-25 18:15       ` Jan Kiszka
2009-05-25 18:20         ` Jan Kiszka
2009-05-26  8:11           ` Avi Kivity

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1242393125.3082.4.camel@localhost.localdomain \
    --to=jaswinder@kernel.org \
    --cc=andi@firstfloor.org \
    --cc=avi@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).