From: Jaswinder Singh Rajput <jaswinder@kernel.org>
To: Gary Hade <garyhade@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>,
Larry Finger <Larry.Finger@lwfinger.net>,
Jesse Barnes <jbarnes@virtuousgeek.org>,
LKML <linux-kernel@vger.kernel.org>, Ingo Molnar <mingo@elte.hu>,
x86 maintainers <x86@kernel.org>, Len Brown <lenb@kernel.org>,
Linus Torvalds <torvalds@linux-foundation.org>
Subject: Re: Regression with commit f9cde5f in 2.6.30-gitX
Date: Wed, 24 Jun 2009 21:45:00 +0530 [thread overview]
Message-ID: <1245860100.3216.7.camel@localhost.localdomain> (raw)
In-Reply-To: <20090624155632.GB7239@us.ibm.com>
On Wed, 2009-06-24 at 08:56 -0700, Gary Hade wrote:
> On Wed, Jun 24, 2009 at 04:51:48PM +0200, Thomas Gleixner wrote:
> > On Wed, 24 Jun 2009, Jaswinder Singh Rajput wrote:
> > > Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
> > > Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
> > > ---
> > > arch/x86/pci/acpi.c | 16 ++++++++++------
> > > 1 files changed, 10 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
> > > index 16c3fda..0bc015f 100644
> > > --- a/arch/x86/pci/acpi.c
> > > +++ b/arch/x86/pci/acpi.c
> > > @@ -69,6 +69,9 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
> > > struct resource *root;
> > > int max_root_bus_resources = PCI_BUS_NUM_RESOURCES;
> > >
> > > + if (info->res_num >= PCI_BUS_NUM_RESOURCES)
> > > + return AE_OK;
> > > +
> > > status = resource_to_addr(acpi_res, &addr);
> > > if (!ACPI_SUCCESS(status))
> > > return AE_OK;
> > > @@ -94,17 +97,18 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
> > > if (bus_has_transparent_bridge(info->bus))
> > > max_root_bus_resources -= 3;
> > > if (info->res_num >= max_root_bus_resources) {
> > > - printk(KERN_WARNING "PCI: Failed to allocate 0x%lx-0x%lx "
> > > - "from %s for %s due to _CRS returning more than "
> > > - "%d resource descriptors\n", (unsigned long) res->start,
> > > - (unsigned long) res->end, root->name, info->name,
> > > - max_root_bus_resources);
> > > + pr_warning("PCI: Failed to allocate 0x%lx-0x%lx "
> > > + "from %s for %s due to _CRS returning more than "
> > > + "%d resource descriptors\n",
> > > + (unsigned long)res->start, (unsigned long)res->end,
> > > + root->name, info->name, max_root_bus_resources);
> >
> > Can you please avoid mixing cleanup patches with bug fixes ? I almost
> > did not see the line below.
> >
> > > + info->bus->resource[info->res_num] = res;
> >
> > Storing the resource in defeats the purpose of the original patch,
> > which makes sure that we do _NOT_ use the last 3 slots of the resource
> > array for a root bus with a transparent bridge.
> >
> > > info->res_num++;
> >
> > This is the real bug. info->res_num should not be incremented when we
> > run out of resources already.
>
> This probably isn't needed but I don't think it is the cause of
> the problem. It is just counting the number of _CRS returned
> resources and I believe subsequent visits to setup_resource()
> for additional returned resources will generate the same warning
> as it also would if the instruction were removed and no longer
> being used to keep an accurate count.
>
Yes, this count is needed to avoid PCI failure.
Thanks,
--
JSR
next prev parent reply other threads:[~2009-06-24 16:16 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-24 1:33 Regression with commit f9cde5f in 2.6.30-gitX Larry Finger
2009-06-24 5:31 ` Larry Finger
2009-06-24 12:16 ` Jaswinder Singh Rajput
2009-06-24 12:22 ` Ingo Molnar
2009-06-24 12:30 ` Jaswinder Singh Rajput
2009-06-24 14:46 ` Gary Hade
2009-06-24 14:21 ` Larry Finger
2009-06-24 15:16 ` Ingo Molnar
2009-06-24 15:19 ` Thomas Gleixner
2009-06-24 15:42 ` Larry Finger
2009-06-24 15:57 ` Jaswinder Singh Rajput
2009-06-24 16:13 ` Gary Hade
2009-06-24 16:33 ` Jaswinder Singh Rajput
2009-06-24 16:44 ` Jesse Barnes
2009-06-24 17:55 ` Gary Hade
2009-06-24 18:28 ` Jesse Barnes
2009-06-24 18:45 ` Thomas Gleixner
2009-06-24 19:48 ` Gary Hade
2009-06-24 20:05 ` Larry Finger
2009-06-24 21:24 ` Gary Hade
2009-06-24 22:12 ` Gary Hade
2009-06-24 21:32 ` Yinghai Lu
2009-06-24 21:42 ` Larry Finger
2009-06-24 21:44 ` Yinghai Lu
2009-06-24 22:04 ` Larry Finger
2009-06-24 22:11 ` Yinghai Lu
2009-06-24 22:53 ` Yinghai Lu
2009-06-24 23:33 ` Larry Finger
2009-06-24 23:44 ` Linus Torvalds
2009-06-24 19:28 ` Gary Hade
2009-06-24 16:52 ` Larry Finger
2009-06-24 14:51 ` Thomas Gleixner
2009-06-24 15:55 ` Jaswinder Singh Rajput
2009-06-24 16:17 ` Thomas Gleixner
2009-06-24 15:56 ` Gary Hade
2009-06-24 16:15 ` Jaswinder Singh Rajput [this message]
2009-06-24 16:33 ` Gary Hade
2009-06-24 16:25 ` Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1245860100.3216.7.camel@localhost.localdomain \
--to=jaswinder@kernel.org \
--cc=Larry.Finger@lwfinger.net \
--cc=garyhade@us.ibm.com \
--cc=jbarnes@virtuousgeek.org \
--cc=lenb@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox