From: Avi Kivity <avi@redhat.com>
To: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 12/47] KVM: VMX: EPT misconfiguration handler
Date: Wed, 19 Aug 2009 16:02:08 +0300 [thread overview]
Message-ID: <1250686963-8357-13-git-send-email-avi@redhat.com> (raw)
In-Reply-To: <1250686963-8357-1-git-send-email-avi@redhat.com>
From: Marcelo Tosatti <mtosatti@redhat.com>
Handler for EPT misconfiguration which checks for valid state
in the shadow pagetables, printing the spte on each level.
The separate WARN_ONs are useful for kerneloops.org.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
arch/x86/kvm/vmx.c | 86 +++++++++++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 85 insertions(+), 1 deletions(-)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 6610181..94c07ad 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3227,6 +3227,89 @@ static int handle_ept_violation(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
return kvm_mmu_page_fault(vcpu, gpa & PAGE_MASK, 0);
}
+static u64 ept_rsvd_mask(u64 spte, int level)
+{
+ int i;
+ u64 mask = 0;
+
+ for (i = 51; i > boot_cpu_data.x86_phys_bits; i--)
+ mask |= (1ULL << i);
+
+ if (level > 2)
+ /* bits 7:3 reserved */
+ mask |= 0xf8;
+ else if (level == 2) {
+ if (spte & (1ULL << 7))
+ /* 2MB ref, bits 20:12 reserved */
+ mask |= 0x1ff000;
+ else
+ /* bits 6:3 reserved */
+ mask |= 0x78;
+ }
+
+ return mask;
+}
+
+static void ept_misconfig_inspect_spte(struct kvm_vcpu *vcpu, u64 spte,
+ int level)
+{
+ printk(KERN_ERR "%s: spte 0x%llx level %d\n", __func__, spte, level);
+
+ /* 010b (write-only) */
+ WARN_ON((spte & 0x7) == 0x2);
+
+ /* 110b (write/execute) */
+ WARN_ON((spte & 0x7) == 0x6);
+
+ /* 100b (execute-only) and value not supported by logical processor */
+ if (!cpu_has_vmx_ept_execute_only())
+ WARN_ON((spte & 0x7) == 0x4);
+
+ /* not 000b */
+ if ((spte & 0x7)) {
+ u64 rsvd_bits = spte & ept_rsvd_mask(spte, level);
+
+ if (rsvd_bits != 0) {
+ printk(KERN_ERR "%s: rsvd_bits = 0x%llx\n",
+ __func__, rsvd_bits);
+ WARN_ON(1);
+ }
+
+ if (level == 1 || (level == 2 && (spte & (1ULL << 7)))) {
+ u64 ept_mem_type = (spte & 0x38) >> 3;
+
+ if (ept_mem_type == 2 || ept_mem_type == 3 ||
+ ept_mem_type == 7) {
+ printk(KERN_ERR "%s: ept_mem_type=0x%llx\n",
+ __func__, ept_mem_type);
+ WARN_ON(1);
+ }
+ }
+ }
+}
+
+static int handle_ept_misconfig(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ u64 sptes[4];
+ int nr_sptes, i;
+ gpa_t gpa;
+
+ gpa = vmcs_read64(GUEST_PHYSICAL_ADDRESS);
+
+ printk(KERN_ERR "EPT: Misconfiguration.\n");
+ printk(KERN_ERR "EPT: GPA: 0x%llx\n", gpa);
+
+ nr_sptes = kvm_mmu_get_spte_hierarchy(vcpu, gpa, sptes);
+
+ for (i = PT64_ROOT_LEVEL; i > PT64_ROOT_LEVEL - nr_sptes; --i)
+ ept_misconfig_inspect_spte(vcpu, sptes[i-1], i);
+
+ kvm_run->exit_reason = KVM_EXIT_UNKNOWN;
+ kvm_run->hw.hardware_exit_reason = EXIT_REASON_EPT_MISCONFIG;
+
+ return 0;
+}
+
static int handle_nmi_window(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
{
u32 cpu_based_vm_exec_control;
@@ -3306,8 +3389,9 @@ static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu,
[EXIT_REASON_APIC_ACCESS] = handle_apic_access,
[EXIT_REASON_WBINVD] = handle_wbinvd,
[EXIT_REASON_TASK_SWITCH] = handle_task_switch,
- [EXIT_REASON_EPT_VIOLATION] = handle_ept_violation,
[EXIT_REASON_MCE_DURING_VMENTRY] = handle_machine_check,
+ [EXIT_REASON_EPT_VIOLATION] = handle_ept_violation,
+ [EXIT_REASON_EPT_MISCONFIG] = handle_ept_misconfig,
};
static const int kvm_vmx_max_exit_handlers =
--
1.6.3.3
next prev parent reply other threads:[~2009-08-19 13:12 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-19 13:01 [PATCH 00/47] KVM updates for 2.6.32 merge window (2/4) Avi Kivity
2009-08-19 13:01 ` [PATCH 01/47] KVM: Return to userspace on emulation failure Avi Kivity
2009-08-19 13:01 ` [PATCH 02/47] KVM: MMU: introduce is_last_spte helper Avi Kivity
2009-08-19 13:01 ` [PATCH 03/47] KVM: MMU audit: update count_writable_mappings / count_rmaps Avi Kivity
2009-08-19 13:02 ` [PATCH 04/47] KVM: MMU audit: update audit_write_protection Avi Kivity
2009-08-19 13:02 ` [PATCH 05/47] KVM: MMU audit: nontrapping ptes in nonleaf level Avi Kivity
2009-08-19 13:02 ` [PATCH 06/47] KVM: MMU audit: audit_mappings tweaks Avi Kivity
2009-08-19 13:02 ` [PATCH 07/47] KVM: MMU audit: largepage handling Avi Kivity
2009-08-19 13:02 ` [PATCH 08/47] KVM: Move performance counter MSR access interception to generic x86 path Avi Kivity
2009-08-19 13:02 ` [PATCH 09/47] KVM: VMX: more MSR_IA32_VMX_EPT_VPID_CAP capability bits Avi Kivity
2009-08-19 13:02 ` [PATCH 10/47] KVM: MMU: make for_each_shadow_entry aware of largepages Avi Kivity
2009-08-19 13:02 ` [PATCH 11/47] KVM: MMU: add kvm_mmu_get_spte_hierarchy helper Avi Kivity
2009-08-19 13:02 ` Avi Kivity [this message]
2009-08-19 13:02 ` [PATCH 13/47] KVM: VMX: conditionally disable 2M pages Avi Kivity
2009-08-19 13:02 ` [PATCH 14/47] KVM: Replace pending exception by PF if it happens serially Avi Kivity
2009-08-19 13:02 ` [PATCH 15/47] KVM: Optimize searching for highest IRR Avi Kivity
2009-08-19 13:02 ` [PATCH 16/47] KVM: Fix racy event propagation in timer Avi Kivity
2009-08-19 13:02 ` [PATCH 17/47] KVM: Drop useless atomic test from timer function Avi Kivity
2009-08-19 13:02 ` [PATCH 18/47] KVM: VMX: Only reload guest cr2 if different from host cr2 Avi Kivity
2009-08-19 13:02 ` [PATCH 19/47] KVM: SVM: Don't save/restore " Avi Kivity
2009-08-19 13:02 ` [PATCH 20/47] x86: Add definition for IGNNE MSR Avi Kivity
2009-08-19 13:02 ` [PATCH 21/47] KVM: Implement MSRs used by Hyper-V Avi Kivity
2009-08-19 13:02 ` [PATCH 22/47] KVM: SVM: Implement INVLPGA Avi Kivity
2009-08-19 13:02 ` [PATCH 23/47] KVM: SVM: Improve nested interrupt injection Avi Kivity
2009-08-19 13:02 ` [PATCH 24/47] KVM: convert custom marker based tracing to event traces Avi Kivity
2009-08-19 13:02 ` [PATCH 25/47] KVM: Allow emulation of syscalls instructions on #UD Avi Kivity
2009-08-19 13:02 ` [PATCH 26/47] KVM: x86 emulator: Add missing EFLAGS bit definitions Avi Kivity
2009-08-19 13:02 ` [PATCH 27/47] KVM: x86 emulator: Prepare for emulation of syscall instructions Avi Kivity
2009-08-19 13:02 ` [PATCH 28/47] KVM: x86 emulator: add syscall emulation Avi Kivity
2009-08-19 13:02 ` [PATCH 29/47] KVM: x86 emulator: Add sysenter emulation Avi Kivity
2009-08-19 13:02 ` [PATCH 30/47] KVM: x86 emulator: Add sysexit emulation Avi Kivity
2009-08-19 13:02 ` [PATCH 31/47] KVM: s390: Fix memslot initialization for userspace_addr != 0 Avi Kivity
2009-08-19 13:02 ` [PATCH 32/47] hugetlbfs: export vma_kernel_pagsize to modules Avi Kivity
2009-08-19 13:02 ` [PATCH 33/47] KVM: Prepare memslot data structures for multiple hugepage sizes Avi Kivity
2009-08-19 13:02 ` [PATCH 34/47] KVM: x86: missing locking in PIT/IRQCHIP/SET_BSP_CPU ioctl paths Avi Kivity
2009-08-19 13:02 ` [PATCH 35/47] KVM: ignore AMDs HWCR register access to set the FFDIS bit Avi Kivity
2009-08-19 13:02 ` [PATCH 36/47] KVM: ignore reads from AMDs C1E enabled MSR Avi Kivity
2009-08-19 13:02 ` [PATCH 37/47] KVM: introduce module parameter for ignoring unknown MSRs accesses Avi Kivity
2009-08-19 13:02 ` [PATCH 38/47] KVM: powerpc: convert marker probes to event trace Avi Kivity
2009-08-19 13:02 ` [PATCH 39/47] KVM: remove old KVMTRACE support code Avi Kivity
2009-08-19 13:02 ` [PATCH 40/47] KVM: use vcpu_id instead of bsp_vcpu pointer in kvm_vcpu_is_bsp Avi Kivity
2009-08-19 13:02 ` [PATCH 41/47] KVM: document locking for kvm_io_device_ops Avi Kivity
2009-08-19 13:02 ` [PATCH 42/47] KVM: switch coalesced mmio changes to slots_lock Avi Kivity
2009-08-19 13:02 ` [PATCH 43/47] KVM: switch pit creation " Avi Kivity
2009-08-19 13:02 ` [PATCH 44/47] KVM: convert bus " Avi Kivity
2009-08-19 13:02 ` [PATCH 45/47] KVM: remove in_range from io devices Avi Kivity
2009-08-19 13:02 ` [PATCH 46/47] KVM: document lock nesting rule Avi Kivity
2009-08-19 13:02 ` [PATCH 47/47] KVM: fix lock imbalance Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1250686963-8357-13-git-send-email-avi@redhat.com \
--to=avi@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox