Re: [PATCH 1/3 pci#linux-next] pci: determine CLS more intelligently

[Benjamin Herrenschmidt <benh@kernel.crashing.org>]

On Tue, 2009-09-22 at 17:33 +0900, Tejun Heo wrote:
> Till now, CLS has been determined either by arch code or as
> L1_CACHE_BYTES.  Only x86 and ia64 set CLS explicitly and x86 doesn't
> always get it right.  On most configurations, the chance is that
> firmware configures the correct value during boot.
> 
> This patch makes pci_init() determine CLS by looking at what firmware
> has configured.  It scans all devices and if all non-zero values
> agree, the value is used.  If none is configured or there is a
> disagreement, pci_dfl_cache_line_size is used.  arch can set the dfl
> value (via PCI_CACHE_LINE_BYTES or pci_dfl_cache_line_size) or
> override the actual one.
> 
> ia64, x86 and sparc64 updated to set the default cls instead of the
> actual one.
> 
> While at it, declare pci_cache_line_size and pci_dfl_cache_line_size
> in pci.h and drop private declarations from arch code.

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---

> Signed-off-by: Tejun Heo <tj@kernel.org>
> Acked-by: David Miller <davem@davemloft.net>
> Acked-by: Greg KH <gregkh@suse.de>
> Cc: Ingo Molnar <mingo@elte.hu>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Tony Luck <tony.luck@intel.com>
> ---
> Sorry about the delay.  Here are the regenerated patches.  They are
> against linux-next branch of pci-2.6.git tree as of Sept 22nd
> (76baeebf7df493703eeb4428eac015bdb7fabda6).  Thanks.
> 
>  arch/ia64/pci/pci.c   |    9 +++------
>  arch/x86/pci/common.c |    8 +++-----
>  drivers/pci/pci.c     |   49 +++++++++++++++++++++++++++++++++++++++++--------
>  include/linux/pci.h   |    2 ++
>  4 files changed, 49 insertions(+), 19 deletions(-)
> 
> Index: work/arch/ia64/pci/pci.c
> ===================================================================
> --- work.orig/arch/ia64/pci/pci.c
> +++ work/arch/ia64/pci/pci.c
> @@ -715,9 +715,6 @@ int ia64_pci_legacy_write(struct pci_bus
>  	return ret;
>  }
> 
> -/* It's defined in drivers/pci/pci.c */
> -extern u8 pci_cache_line_size;
> -
>  /**
>   * set_pci_cacheline_size - determine cacheline size for PCI devices
>   *
> @@ -726,7 +723,7 @@ extern u8 pci_cache_line_size;
>   *
>   * Code mostly taken from arch/ia64/kernel/palinfo.c:cache_info().
>   */
> -static void __init set_pci_cacheline_size(void)
> +static void __init set_pci_dfl_cacheline_size(void)
>  {
>  	unsigned long levels, unique_caches;
>  	long status;
> @@ -746,7 +743,7 @@ static void __init set_pci_cacheline_siz
>  			"(status=%ld)\n", __func__, status);
>  		return;
>  	}
> -	pci_cache_line_size = (1 << cci.pcci_line_size) / 4;
> +	pci_dfl_cache_line_size = (1 << cci.pcci_line_size) / 4;
>  }
> 
>  u64 ia64_dma_get_required_mask(struct device *dev)
> @@ -777,7 +774,7 @@ EXPORT_SYMBOL_GPL(dma_get_required_mask)
> 
>  static int __init pcibios_init(void)
>  {
> -	set_pci_cacheline_size();
> +	set_pci_dfl_cacheline_size();
>  	return 0;
>  }
> 
> Index: work/arch/x86/pci/common.c
> ===================================================================
> --- work.orig/arch/x86/pci/common.c
> +++ work/arch/x86/pci/common.c
> @@ -410,8 +410,6 @@ struct pci_bus * __devinit pcibios_scan_
>  	return bus;
>  }
> 
> -extern u8 pci_cache_line_size;
> -
>  int __init pcibios_init(void)
>  {
>  	struct cpuinfo_x86 *c = &boot_cpu_data;
> @@ -426,11 +424,11 @@ int __init pcibios_init(void)
>  	 * and P4. It's also good for 386/486s (which actually have 16)
>  	 * as quite a few PCI devices do not support smaller values.
>  	 */
> -	pci_cache_line_size = 32 >> 2;
> +	pci_dfl_cache_line_size = 32 >> 2;
>  	if (c->x86 >= 6 && c->x86_vendor == X86_VENDOR_AMD)
> -		pci_cache_line_size = 64 >> 2;	/* K7 & K8 */
> +		pci_dfl_cache_line_size = 64 >> 2;	/* K7 & K8 */
>  	else if (c->x86 > 6 && c->x86_vendor == X86_VENDOR_INTEL)
> -		pci_cache_line_size = 128 >> 2;	/* P4 */
> +		pci_dfl_cache_line_size = 128 >> 2;	/* P4 */
> 
>  	pcibios_resource_survey();
> 
> Index: work/drivers/pci/pci.c
> ===================================================================
> --- work.orig/drivers/pci/pci.c
> +++ work/drivers/pci/pci.c
> @@ -47,6 +47,19 @@ unsigned long pci_cardbus_mem_size = DEF
>  unsigned long pci_hotplug_io_size  = DEFAULT_HOTPLUG_IO_SIZE;
>  unsigned long pci_hotplug_mem_size = DEFAULT_HOTPLUG_MEM_SIZE;
> 
> +#ifndef PCI_CACHE_LINE_BYTES
> +#define PCI_CACHE_LINE_BYTES L1_CACHE_BYTES
> +#endif
> +
> +/*
> + * The default CLS is used if arch didn't set CLS explicitly and not
> + * all pci devices agree on the same value.  Arch can override either
> + * the dfl or actual value as it sees fit.  Don't forget this is
> + * measured in 32-bit words, not bytes.
> + */
> +u8 pci_dfl_cache_line_size __initdata = PCI_CACHE_LINE_BYTES >> 2;
> +u8 pci_cache_line_size;
> +
>  /**
>   * pci_bus_max_busnr - returns maximum PCI bus number of given bus' children
>   * @bus: pointer to PCI bus structure to search
> @@ -1879,14 +1892,6 @@ void pci_clear_mwi(struct pci_dev *dev)
> 
>  #else
> 
> -#ifndef PCI_CACHE_LINE_BYTES
> -#define PCI_CACHE_LINE_BYTES L1_CACHE_BYTES
> -#endif
> -
> -/* This can be overridden by arch code. */
> -/* Don't forget this is measured in 32-bit words, not bytes */
> -u8 pci_cache_line_size = PCI_CACHE_LINE_BYTES / 4;
> -
>  /**
>   * pci_set_cacheline_size - ensure the CACHE_LINE_SIZE register is programmed
>   * @dev: the PCI device for which MWI is to be enabled
> @@ -2722,9 +2727,37 @@ int __attribute__ ((weak)) pci_ext_cfg_a
>  static int __devinit pci_init(void)
>  {
>  	struct pci_dev *dev = NULL;
> +	u8 cls = 0;
> +	u8 tmp;
> +
> +	if (pci_cache_line_size)
> +		printk(KERN_DEBUG "PCI: CLS %u bytes\n",
> +		       pci_cache_line_size << 2);
> 
>  	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
>  		pci_fixup_device(pci_fixup_final, dev);
> +		/*
> +		 * If arch hasn't set it explicitly yet, use the CLS
> +		 * value shared by all PCI devices.  If there's a
> +		 * mismatch, fall back to the default value.
> +		 */
> +		if (!pci_cache_line_size) {
> +			pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &tmp);
> +			if (!cls)
> +				cls = tmp;
> +			if (!tmp || cls == tmp)
> +				continue;
> +
> +			printk(KERN_DEBUG "PCI: CLS mismatch (%u != %u), "
> +			       "using %u bytes\n", cls << 2, tmp << 2,
> +			       pci_dfl_cache_line_size << 2);
> +			pci_cache_line_size = pci_dfl_cache_line_size;
> +		}
> +	}
> +	if (!pci_cache_line_size) {
> +		printk(KERN_DEBUG "PCI: CLS %u bytes, default %u\n",
> +		       cls << 2, pci_dfl_cache_line_size << 2);
> +		pci_cache_line_size = cls;
>  	}
> 
>  	return 0;
> Index: work/include/linux/pci.h
> ===================================================================
> --- work.orig/include/linux/pci.h
> +++ work/include/linux/pci.h
> @@ -1246,6 +1246,8 @@ extern int pci_pci_problems;
> 
>  extern unsigned long pci_cardbus_io_size;
>  extern unsigned long pci_cardbus_mem_size;
> +extern u8 pci_dfl_cache_line_size;
> +extern u8 pci_cache_line_size;
> 
>  extern unsigned long pci_hotplug_io_size;
>  extern unsigned long pci_hotplug_mem_size;
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html