From: Frederic Weisbecker <fweisbec@gmail.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: LKML <linux-kernel@vger.kernel.org>,
Masami Hiramatsu <mhiramat@redhat.com>,
Steven Rostedt <rostedt@goodmis.org>,
Jim Keniston <jkenisto@us.ibm.com>,
Ananth N Mavinakayanahalli <ananth@in.ibm.com>,
Andi Kleen <ak@linux.intel.com>,
Christoph Hellwig <hch@infradead.org>,
"Frank Ch. Eigler" <fche@redhat.com>,
"H. Peter Anvin" <hpa@zytor.com>, Jason Baron <jbaron@redhat.com>,
"K.Prasad" <prasad@linux.vnet.ibm.com>,
Lai Jiangshan <laijs@cn.fujitsu.com>,
Li Zefan <lizf@cn.fujitsu.com>,
Peter Zijlstra <peterz@infradead.org>,
Srikar Dronamraju <srikar@linux.vnet.ibm.com>,
Tom Zanussi <tzanussi@gmail.com>,
Frederic Weisbecker <fweisbec@gmail.com>
Subject: [PATCH 1/3] tracing/kprobes: Use global event perf buffers in kprobe tracer
Date: Sat, 3 Oct 2009 04:31:29 +0200 [thread overview]
Message-ID: <1254537091-4993-2-git-send-email-fweisbec@gmail.com> (raw)
In-Reply-To: <1254537091-4993-1-git-send-email-fweisbec@gmail.com>
From: Masami Hiramatsu <mhiramat@redhat.com>
Use new percpu global event buffer instead of stack in kprobe
tracer while tracing through perf.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20090925182011.10157.60140.stgit@omoto>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
kernel/trace/trace_kprobe.c | 115 +++++++++++++++++++++++++++----------------
1 files changed, 73 insertions(+), 42 deletions(-)
diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c
index 09cba27..97309d4 100644
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -1149,35 +1149,49 @@ static __kprobes int kprobe_profile_func(struct kprobe *kp,
struct trace_probe *tp = container_of(kp, struct trace_probe, rp.kp);
struct ftrace_event_call *call = &tp->call;
struct kprobe_trace_entry *entry;
- int size, __size, i, pc;
+ struct trace_entry *ent;
+ int size, __size, i, pc, __cpu;
unsigned long irq_flags;
+ char *raw_data;
- local_save_flags(irq_flags);
pc = preempt_count();
-
__size = SIZEOF_KPROBE_TRACE_ENTRY(tp->nr_args);
size = ALIGN(__size + sizeof(u32), sizeof(u64));
size -= sizeof(u32);
+ if (WARN_ONCE(size > FTRACE_MAX_PROFILE_SIZE,
+ "profile buffer not large enough"))
+ return 0;
- do {
- char raw_data[size];
- struct trace_entry *ent;
- /*
- * Zero dead bytes from alignment to avoid stack leak
- * to userspace
- */
- *(u64 *)(&raw_data[size - sizeof(u64)]) = 0ULL;
- entry = (struct kprobe_trace_entry *)raw_data;
- ent = &entry->ent;
-
- tracing_generic_entry_update(ent, irq_flags, pc);
- ent->type = call->id;
- entry->nargs = tp->nr_args;
- entry->ip = (unsigned long)kp->addr;
- for (i = 0; i < tp->nr_args; i++)
- entry->args[i] = call_fetch(&tp->args[i].fetch, regs);
- perf_tp_event(call->id, entry->ip, 1, entry, size);
- } while (0);
+ /*
+ * Protect the non nmi buffer
+ * This also protects the rcu read side
+ */
+ local_irq_save(irq_flags);
+ __cpu = smp_processor_id();
+
+ if (in_nmi())
+ raw_data = rcu_dereference(trace_profile_buf_nmi);
+ else
+ raw_data = rcu_dereference(trace_profile_buf);
+
+ if (!raw_data)
+ goto end;
+
+ raw_data = per_cpu_ptr(raw_data, __cpu);
+ /* Zero dead bytes from alignment to avoid buffer leak to userspace */
+ *(u64 *)(&raw_data[size - sizeof(u64)]) = 0ULL;
+ entry = (struct kprobe_trace_entry *)raw_data;
+ ent = &entry->ent;
+
+ tracing_generic_entry_update(ent, irq_flags, pc);
+ ent->type = call->id;
+ entry->nargs = tp->nr_args;
+ entry->ip = (unsigned long)kp->addr;
+ for (i = 0; i < tp->nr_args; i++)
+ entry->args[i] = call_fetch(&tp->args[i].fetch, regs);
+ perf_tp_event(call->id, entry->ip, 1, entry, size);
+end:
+ local_irq_restore(irq_flags);
return 0;
}
@@ -1188,33 +1202,50 @@ static __kprobes int kretprobe_profile_func(struct kretprobe_instance *ri,
struct trace_probe *tp = container_of(ri->rp, struct trace_probe, rp);
struct ftrace_event_call *call = &tp->call;
struct kretprobe_trace_entry *entry;
- int size, __size, i, pc;
+ struct trace_entry *ent;
+ int size, __size, i, pc, __cpu;
unsigned long irq_flags;
+ char *raw_data;
- local_save_flags(irq_flags);
pc = preempt_count();
-
__size = SIZEOF_KRETPROBE_TRACE_ENTRY(tp->nr_args);
size = ALIGN(__size + sizeof(u32), sizeof(u64));
size -= sizeof(u32);
+ if (WARN_ONCE(size > FTRACE_MAX_PROFILE_SIZE,
+ "profile buffer not large enough"))
+ return 0;
+
+ /*
+ * Protect the non nmi buffer
+ * This also protects the rcu read side
+ */
+ local_irq_save(irq_flags);
+ __cpu = smp_processor_id();
+
+ if (in_nmi())
+ raw_data = rcu_dereference(trace_profile_buf_nmi);
+ else
+ raw_data = rcu_dereference(trace_profile_buf);
+
+ if (!raw_data)
+ goto end;
+
+ raw_data = per_cpu_ptr(raw_data, __cpu);
+ /* Zero dead bytes from alignment to avoid buffer leak to userspace */
+ *(u64 *)(&raw_data[size - sizeof(u64)]) = 0ULL;
+ entry = (struct kretprobe_trace_entry *)raw_data;
+ ent = &entry->ent;
- do {
- char raw_data[size];
- struct trace_entry *ent;
-
- *(u64 *)(&raw_data[size - sizeof(u64)]) = 0ULL;
- entry = (struct kretprobe_trace_entry *)raw_data;
- ent = &entry->ent;
-
- tracing_generic_entry_update(ent, irq_flags, pc);
- ent->type = call->id;
- entry->nargs = tp->nr_args;
- entry->func = (unsigned long)tp->rp.kp.addr;
- entry->ret_ip = (unsigned long)ri->ret_addr;
- for (i = 0; i < tp->nr_args; i++)
- entry->args[i] = call_fetch(&tp->args[i].fetch, regs);
- perf_tp_event(call->id, entry->ret_ip, 1, entry, size);
- } while (0);
+ tracing_generic_entry_update(ent, irq_flags, pc);
+ ent->type = call->id;
+ entry->nargs = tp->nr_args;
+ entry->func = (unsigned long)tp->rp.kp.addr;
+ entry->ret_ip = (unsigned long)ri->ret_addr;
+ for (i = 0; i < tp->nr_args; i++)
+ entry->args[i] = call_fetch(&tp->args[i].fetch, regs);
+ perf_tp_event(call->id, entry->ret_ip, 1, entry, size);
+end:
+ local_irq_restore(irq_flags);
return 0;
}
--
1.6.2.3
next prev parent reply other threads:[~2009-10-03 2:31 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-03 2:31 [GIT PULL] tracing/kprobes: kprobes fixes Frederic Weisbecker
2009-10-03 2:31 ` Frederic Weisbecker [this message]
2009-10-03 2:31 ` [PATCH 2/3] x86: Add VIA processor instructions in opcodes decoder Frederic Weisbecker
2009-10-03 2:31 ` [PATCH 3/3] tracing/ftrace: Fix to check create_event_dir() when adding new events Frederic Weisbecker
2009-10-03 10:35 ` [GIT PULL] tracing/kprobes: kprobes fixes Ingo Molnar
2009-10-03 10:49 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1254537091-4993-2-git-send-email-fweisbec@gmail.com \
--to=fweisbec@gmail.com \
--cc=ak@linux.intel.com \
--cc=ananth@in.ibm.com \
--cc=fche@redhat.com \
--cc=hch@infradead.org \
--cc=hpa@zytor.com \
--cc=jbaron@redhat.com \
--cc=jkenisto@us.ibm.com \
--cc=laijs@cn.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lizf@cn.fujitsu.com \
--cc=mhiramat@redhat.com \
--cc=mingo@elte.hu \
--cc=peterz@infradead.org \
--cc=prasad@linux.vnet.ibm.com \
--cc=rostedt@goodmis.org \
--cc=srikar@linux.vnet.ibm.com \
--cc=tzanussi@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox