From: Daniel Mack <daniel@caiaq.de>
To: linux-kernel@vger.kernel.org
Cc: Daniel Mack <daniel@caiaq.de>,
Andrew Morton <akpm@linux-foundation.org>,
David Brownell <dbrownell@users.sourceforge.net>,
spi-devel-general@lists.sourceforge.net
Subject: [PATCH] drivers/misc: add driver for Texas Instruments DAC7512
Date: Thu, 8 Oct 2009 04:01:05 +0800 [thread overview]
Message-ID: <1254945665-28053-1-git-send-email-daniel@caiaq.de> (raw)
This is actually too trivial to publish, but to export the function of
that chip to the userspace, a module like this is needed.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: spi-devel-general@lists.sourceforge.net
---
drivers/misc/Kconfig | 10 ++++
drivers/misc/Makefile | 1 +
drivers/misc/ti_dac7512.c | 102 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 113 insertions(+), 0 deletions(-)
create mode 100644 drivers/misc/ti_dac7512.c
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index df1f86b..1191446 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -246,6 +246,16 @@ config EP93XX_PWM
To compile this driver as a module, choose M here: the module will
be called ep93xx_pwm.
+config TI_DAC7512
+ tristate "Texas Instruments DAC7512"
+ depends on SPI && SYSFS
+ help
+ If you say yes here you get support for the Texas Instruments
+ DAC7512 16-bit digital-to-analog converter.
+
+ This driver can also be built as a module. If so, the module
+ will be calles ti_dac7512.
+
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index f982d2e..d59830e 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_SGI_GRU) += sgi-gru/
obj-$(CONFIG_HP_ILO) += hpilo.o
obj-$(CONFIG_ISL29003) += isl29003.o
obj-$(CONFIG_EP93XX_PWM) += ep93xx_pwm.o
+obj-$(CONFIG_TI_DAC7512) += ti_dac7512.o
obj-$(CONFIG_C2PORT) += c2port/
obj-y += eeprom/
obj-y += cb710/
diff --git a/drivers/misc/ti_dac7512.c b/drivers/misc/ti_dac7512.c
new file mode 100644
index 0000000..3c60dcf
--- /dev/null
+++ b/drivers/misc/ti_dac7512.c
@@ -0,0 +1,102 @@
+/*
+ * dac7512.c - Linux kernel module for
+ * Texas Instruments DAC7512
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/spi/spi.h>
+
+#define DAC7512_DRV_NAME "dac7512"
+#define DRIVER_VERSION "1.0"
+
+static ssize_t dac7512_store_val(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ unsigned char tmp[2];
+ unsigned long val;
+
+ if (strict_strtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ tmp[0] = val >> 8;
+ tmp[1] = val & 0xff;
+ spi_write(spi, tmp, sizeof(tmp));
+ return count;
+}
+
+static DEVICE_ATTR(value, S_IWUSR | S_IRUGO,
+ NULL, dac7512_store_val);
+
+static struct attribute *dac7512_attributes[] = {
+ &dev_attr_value.attr,
+ NULL
+};
+
+static const struct attribute_group dac7512_attr_group = {
+ .attrs = dac7512_attributes,
+};
+
+static int __devinit dac7512_probe(struct spi_device *spi)
+{
+ int ret;
+
+ spi->bits_per_word = 8;
+ spi->mode = SPI_MODE_0;
+ ret = spi_setup(spi);
+ if (ret < 0)
+ return ret;
+
+ return sysfs_create_group(&spi->dev.kobj, &dac7512_attr_group);
+}
+
+static int __devexit dac7512_remove(struct spi_device *spi)
+{
+ sysfs_remove_group(&spi->dev.kobj, &dac7512_attr_group);
+ return 0;
+}
+
+static struct spi_driver dac7512_driver = {
+ .driver = {
+ .name = DAC7512_DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = dac7512_probe,
+ .remove = __devexit_p(dac7512_remove),
+};
+
+static int __init dac7512_init(void)
+{
+ return spi_register_driver(&dac7512_driver);
+}
+
+static void __exit dac7512_exit(void)
+{
+ spi_unregister_driver(&dac7512_driver);
+}
+
+MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
+MODULE_DESCRIPTION("DAC7512 16-bit DAC");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(DRIVER_VERSION);
+
+module_init(dac7512_init);
+module_exit(dac7512_exit);
--
1.6.0.4
next reply other threads:[~2009-10-10 4:42 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-07 20:01 Daniel Mack [this message]
2009-10-12 16:31 ` [spi-devel-general] [PATCH] drivers/misc: add driver for TexasInstruments DAC7512 H Hartley Sweeten
2009-10-13 0:02 ` Daniel Mack
2009-10-13 0:19 ` Daniel Mack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1254945665-28053-1-git-send-email-daniel@caiaq.de \
--to=daniel@caiaq.de \
--cc=akpm@linux-foundation.org \
--cc=dbrownell@users.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=spi-devel-general@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox