From: Greg Kroah-Hartman <gregkh@suse.de>
To: linux-kernel@vger.kernel.org
Cc: Alan Cox <alan@linux.intel.com>, stable <stable@kernel.org>,
Greg Kroah-Hartman <gregkh@suse.de>
Subject: [PATCH 2/2] tty: cp210x: Fix carrier handling
Date: Tue, 17 Nov 2009 17:01:30 -0800 [thread overview]
Message-ID: <1258506090-16802-2-git-send-email-gregkh@suse.de> (raw)
In-Reply-To: <20091118010047.GA16719@kroah.com>
From: Alan Cox <alan@linux.intel.com>
Original discussion:
http://thread.gmane.org/gmane.linux.usb.general/23217/focus=23248
or
http://marc.info/?l=linux-usb&m=125553790714133&w=2
9a68e39d4a701fb3be03cae9b462408664ebd205 broke carrier handling so that a
cp210x setup which needed the carrier lines set up (non CLOCAL) which did
not make a call which set the termios bits left the lines down even if
CLOCAL was not asserted.
Fix this not by reverting but by adding the proper dtr_rts and
carrier_raised methods. This both sets the modem lines properly and also
implements the correct blocking semantics for the port as required by
POSIX.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Reported-by: Karl Hiramoto <karl@hiramoto.org>
Tested-by: Karl Hiramoto <karl@hiramoto.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/cp210x.c | 21 +++++++++++++++++++++
1 files changed, 21 insertions(+), 0 deletions(-)
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 698252a..bd254ec 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -50,6 +50,8 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *,
static void cp210x_break_ctl(struct tty_struct *, int);
static int cp210x_startup(struct usb_serial *);
static void cp210x_disconnect(struct usb_serial *);
+static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
+static int cp210x_carrier_raised(struct usb_serial_port *p);
static int debug;
@@ -143,6 +145,8 @@ static struct usb_serial_driver cp210x_device = {
.tiocmset = cp210x_tiocmset,
.attach = cp210x_startup,
.disconnect = cp210x_disconnect,
+ .dtr_rts = cp210x_dtr_rts,
+ .carrier_raised = cp210x_carrier_raised
};
/* Config request types */
@@ -746,6 +750,14 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *file,
return cp210x_set_config(port, CP210X_SET_MHS, &control, 2);
}
+static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
+{
+ if (on)
+ cp210x_tiocmset_port(p, NULL, TIOCM_DTR|TIOCM_RTS, 0);
+ else
+ cp210x_tiocmset_port(p, NULL, 0, TIOCM_DTR|TIOCM_RTS);
+}
+
static int cp210x_tiocmget (struct tty_struct *tty, struct file *file)
{
struct usb_serial_port *port = tty->driver_data;
@@ -768,6 +780,15 @@ static int cp210x_tiocmget (struct tty_struct *tty, struct file *file)
return result;
}
+static int cp210x_carrier_raised(struct usb_serial_port *p)
+{
+ unsigned int control;
+ cp210x_get_config(p, CP210X_GET_MDMSTS, &control, 1);
+ if (control & CONTROL_DCD)
+ return 1;
+ return 0;
+}
+
static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
--
1.6.4.2
prev parent reply other threads:[~2009-11-18 1:04 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-18 1:00 [GIT PATCH] TTY fixes for 2.6.32-git Greg KH
2009-11-18 1:01 ` [PATCH 1/2] tty_port: If we are opened non blocking we still need to raise the carrier Greg Kroah-Hartman
2009-11-18 1:01 ` Greg Kroah-Hartman [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1258506090-16802-2-git-send-email-gregkh@suse.de \
--to=gregkh@suse.de \
--cc=alan@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox