From: Yinghai Lu <yinghai@kernel.org>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
Andrew Morton <akpm@linux-foundation.org>,
Jesse Barnes <jbarnes@virtuousgeek.org>,
Christoph Lameter <cl@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH 35/36] x86: make 32bit apic flat to physflat switch like 64bit
Date: Wed, 20 Jan 2010 22:28:22 -0800 [thread overview]
Message-ID: <1264055303-15123-36-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1264055303-15123-1-git-send-email-yinghai@kernel.org>
kill def_to_bigsmp
and move switch from default to bigsmp at default_setup_apic_routing...
so make default_setup_apic_routing more like 64 bit
also make the dmi relate code to be __init/__initdata
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/include/asm/apic.h | 3 -
arch/x86/include/asm/mpspec.h | 1 -
arch/x86/kernel/acpi/boot.c | 3 -
arch/x86/kernel/apic/apic.c | 15 -------
arch/x86/kernel/apic/bigsmp_32.c | 48 +----------------------
arch/x86/kernel/apic/probe_32.c | 80 ++++++++++++++++++++-----------------
arch/x86/kernel/mpparse.c | 4 --
arch/x86/kernel/setup.c | 2 -
arch/x86/kernel/smpboot.c | 2 +-
9 files changed, 46 insertions(+), 112 deletions(-)
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index b4ac2cd..d544523 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -456,9 +456,6 @@ static inline void default_wait_for_init_deassert(atomic_t *deassert)
return;
}
-extern void generic_bigsmp_probe(void);
-
-
#ifdef CONFIG_X86_LOCAL_APIC
#include <asm/smp.h>
diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index d8bf23a..b4b295c 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -23,7 +23,6 @@ extern int pic_mode;
#define MAX_IRQ_SOURCES 256
-extern unsigned int def_to_bigsmp;
extern u8 apicid_2_node[];
#ifdef CONFIG_X86_NUMAQ
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index fb1035c..1f9f1fb 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1185,9 +1185,6 @@ static void __init acpi_process_madt(void)
if (!error) {
acpi_lapic = 1;
-#ifdef CONFIG_X86_BIGSMP
- generic_bigsmp_probe();
-#endif
/*
* Parse MADT IO-APIC entries
*/
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 3f2bfb1..dfca210 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1889,21 +1889,6 @@ void __cpuinit generic_processor_info(int apicid, int version)
if (apicid > max_physical_apicid)
max_physical_apicid = apicid;
-#ifdef CONFIG_X86_32
- if (num_processors > 8) {
- switch (boot_cpu_data.x86_vendor) {
- case X86_VENDOR_INTEL:
- if (!APIC_XAPIC(version)) {
- def_to_bigsmp = 0;
- break;
- }
- /* If P4 and above fall through */
- case X86_VENDOR_AMD:
- def_to_bigsmp = 1;
- }
- }
-#endif
-
#if defined(CONFIG_SMP) || defined(CONFIG_X86_64)
early_per_cpu(x86_cpu_to_apicid, cpu) = apicid;
early_per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c
index cb804c5..350d60e 100644
--- a/arch/x86/kernel/apic/bigsmp_32.c
+++ b/arch/x86/kernel/apic/bigsmp_32.c
@@ -7,7 +7,6 @@
#include <linux/cpumask.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/dmi.h>
#include <linux/smp.h>
#include <asm/apicdef.h>
@@ -73,13 +72,6 @@ static void bigsmp_init_apic_ldr(void)
apic_write(APIC_LDR, val);
}
-static void bigsmp_setup_apic_routing(void)
-{
- printk(KERN_INFO
- "Enabling APIC mode: Physflat. Using %d I/O APICs\n",
- nr_ioapics);
-}
-
static int bigsmp_apicid_to_node(int logical_apicid)
{
return apicid_2_node[hard_smp_processor_id()];
@@ -154,52 +146,16 @@ static void bigsmp_send_IPI_all(int vector)
bigsmp_send_IPI_mask(cpu_online_mask, vector);
}
-static int dmi_bigsmp; /* can be set by dmi scanners */
-
-static int hp_ht_bigsmp(const struct dmi_system_id *d)
-{
- printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident);
- dmi_bigsmp = 1;
-
- return 0;
-}
-
-
-static const struct dmi_system_id bigsmp_dmi_table[] = {
- { hp_ht_bigsmp, "HP ProLiant DL760 G2",
- { DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
- DMI_MATCH(DMI_BIOS_VERSION, "P44-"),
- }
- },
-
- { hp_ht_bigsmp, "HP ProLiant DL740",
- { DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
- DMI_MATCH(DMI_BIOS_VERSION, "P47-"),
- }
- },
- { } /* NULL entry stops DMI scanning */
-};
-
static void bigsmp_vector_allocation_domain(int cpu, struct cpumask *retmask)
{
cpumask_clear(retmask);
cpumask_set_cpu(cpu, retmask);
}
-static int probe_bigsmp(void)
-{
- if (def_to_bigsmp)
- dmi_bigsmp = 1;
- else
- dmi_check_system(bigsmp_dmi_table);
-
- return dmi_bigsmp;
-}
-
struct apic apic_bigsmp = {
.name = "bigsmp",
- .probe = probe_bigsmp,
+ .probe = NULL,
.acpi_madt_oem_check = NULL,
.apic_id_registered = bigsmp_apic_id_registered,
@@ -217,7 +173,7 @@ struct apic apic_bigsmp = {
.init_apic_ldr = bigsmp_init_apic_ldr,
.ioapic_phys_id_map = bigsmp_ioapic_phys_id_map,
- .setup_apic_routing = bigsmp_setup_apic_routing,
+ .setup_apic_routing = NULL,
.multi_timer_check = NULL,
.apicid_to_node = bigsmp_apicid_to_node,
.cpu_to_logical_apicid = bigsmp_cpu_to_logical_apicid,
diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c
index d657558..b05e543 100644
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -14,6 +14,8 @@
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/errno.h>
+#include <linux/dmi.h>
+
#include <asm/fixmap.h>
#include <asm/mpspec.h>
#include <asm/apicdef.h>
@@ -52,15 +54,6 @@ static int __init print_ipi_mode(void)
}
late_initcall(print_ipi_mode);
-static void local_default_setup_apic_routing(void)
-{
-#ifdef CONFIG_X86_IO_APIC
- printk(KERN_INFO
- "Enabling APIC mode: Flat. Using %d I/O APICs\n",
- nr_ioapics);
-#endif
-}
-
static void default_vector_allocation_domain(int cpu, struct cpumask *retmask)
{
/*
@@ -76,16 +69,10 @@ static void default_vector_allocation_domain(int cpu, struct cpumask *retmask)
cpumask_bits(retmask)[0] = APIC_ALL_CPUS;
}
-/* should be called last. */
-static int probe_default(void)
-{
- return 1;
-}
-
struct apic apic_default = {
.name = "default",
- .probe = probe_default,
+ .probe = NULL,
.acpi_madt_oem_check = NULL,
.apic_id_registered = default_apic_id_registered,
@@ -103,7 +90,7 @@ struct apic apic_default = {
.init_apic_ldr = default_init_apic_ldr,
.ioapic_phys_id_map = default_ioapic_phys_id_map,
- .setup_apic_routing = local_default_setup_apic_routing,
+ .setup_apic_routing = NULL,
.multi_timer_check = NULL,
.apicid_to_node = default_apicid_to_node,
.cpu_to_logical_apicid = default_cpu_to_logical_apicid,
@@ -192,24 +179,40 @@ static int __init parse_apic(char *arg)
}
early_param("apic", parse_apic);
-void __init generic_bigsmp_probe(void)
+static int dmi_bigsmp __initdata; /* can be set by dmi scanners */
+
+static int __init hp_ht_bigsmp(const struct dmi_system_id *d)
{
-#ifdef CONFIG_X86_BIGSMP
- /*
- * This routine is used to switch to bigsmp mode when
- * - There is no apic= option specified by the user
- * - generic_apic_probe() has chosen apic_default as the sub_arch
- * - we find more than 8 CPUs in acpi LAPIC listing with xAPIC support
- */
+ printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident);
+ dmi_bigsmp = 1;
- if (!cmdline_apic && apic == &apic_default) {
- if (apic_bigsmp.probe()) {
- apic = &apic_bigsmp;
- printk(KERN_INFO "Overriding APIC driver with %s\n",
- apic->name);
+ return 0;
+}
+
+static struct dmi_system_id bigsmp_dmi_table[] __initdata = {
+ { hp_ht_bigsmp, "HP ProLiant DL760 G2",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
+ DMI_MATCH(DMI_BIOS_VERSION, "P44-"),
}
- }
+ },
+
+ { hp_ht_bigsmp, "HP ProLiant DL740",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
+ DMI_MATCH(DMI_BIOS_VERSION, "P47-"),
+ }
+ },
+ { } /* NULL entry stops DMI scanning */
+};
+
+static inline const char *get_apic_name(struct apic *apic)
+{
+ if (apic == &apic_default)
+ return "flat";
+#ifdef CONFIG_X86_BIGSMP
+ if (apic == &apic_bigsmp);
+ return "physical flat";
#endif
+ return apic->name;
}
void __init default_setup_apic_routing(void)
@@ -219,13 +222,19 @@ void __init default_setup_apic_routing(void)
* make sure we go to bigsmp according to real nr_cpu_ids
*/
if (!cmdline_apic && apic == &apic_default) {
- if (nr_cpu_ids > 8) {
+ dmi_check_system(bigsmp_dmi_table);
+ if (nr_cpu_ids > 8 || dmi_bigsmp) {
apic = &apic_bigsmp;
printk(KERN_INFO "Overriding APIC driver with %s\n",
- apic->name);
+ get_apic_name(apic));
}
}
#endif
+#ifdef CONFIG_X86_IO_APIC
+ printk(KERN_INFO
+ "Enabling APIC mode: %s. Using %d I/O APICs\n",
+ get_apic_name(apic), nr_ioapics);
+#endif
}
void __init generic_apic_probe(void)
@@ -233,14 +242,11 @@ void __init generic_apic_probe(void)
if (!cmdline_apic) {
int i;
for (i = 0; apic_probe[i]; i++) {
- if (apic_probe[i]->probe()) {
+ if (apic_probe[i]->probe && apic_probe[i]->probe()) {
apic = apic_probe[i];
break;
}
}
- /* Not visible without early console */
- if (!apic_probe[i])
- panic("Didn't find an APIC driver");
}
printk(KERN_INFO "Using APIC driver %s\n", apic->name);
}
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 40b54ce..0f885c6 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -359,10 +359,6 @@ static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
x86_init.mpparse.mpc_record(1);
}
-#ifdef CONFIG_X86_BIGSMP
- generic_bigsmp_probe();
-#endif
-
if (apic->setup_apic_routing)
apic->setup_apic_routing();
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 8b27c6c..cfcd354 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -184,8 +184,6 @@ static void set_mca_bus(int x)
#endif
}
-unsigned int def_to_bigsmp;
-
/* for MCA, but anyone else can use it if they want */
unsigned int machine_id;
unsigned int machine_submodel_id;
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 96f5f40..f741c33 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -946,7 +946,7 @@ static int __init smp_sanity_check(unsigned max_cpus)
preempt_disable();
#if !defined(CONFIG_X86_BIGSMP) && defined(CONFIG_X86_32)
- if (def_to_bigsmp && nr_cpu_ids > 8) {
+ if (apic == &apic_default && nr_cpu_ids > 8) {
unsigned int cpu;
unsigned nr;
--
1.6.4.2
next prev parent reply other threads:[~2010-01-21 6:30 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-21 6:27 [PATCH -v4 0/36] x86: not use bootmem for x86 Yinghai Lu
2010-01-21 6:27 ` [PATCH 01/36] x86: move range related operation to one file Yinghai Lu
2010-01-21 6:27 ` [PATCH 02/36] x86: check range in update range Yinghai Lu
2010-01-21 20:43 ` Christoph Lameter
2010-01-21 21:02 ` Yinghai Lu
2010-01-21 21:07 ` Christoph Lameter
2010-01-21 6:27 ` [PATCH 03/36] x86/pci: use u64 instead of size_t in amd_bus.c Yinghai Lu
2010-01-21 6:27 ` [PATCH 04/36] x86/pci: add cap_resource Yinghai Lu
2010-01-21 15:49 ` Linus Torvalds
2010-01-21 20:01 ` Yinghai Lu
2010-01-21 6:27 ` [PATCH 05/36] x86/pci: enable pci root res read out for 32bit too Yinghai Lu
2010-01-21 15:54 ` Linus Torvalds
2010-01-21 20:12 ` Yinghai Lu
2010-01-21 6:27 ` [PATCH 06/36] x86: call early_res_to_bootmem one time Yinghai Lu
2010-01-21 6:27 ` [PATCH 07/36] x86: introduce max_early_res and early_res_count Yinghai Lu
2010-01-21 6:27 ` [PATCH 08/36] x86: dynamic increase early_res array size Yinghai Lu
2010-01-21 6:27 ` [PATCH 09/36] x86: print bootmem free before pci_iommu_alloc and free_all_bootmem -v2 Yinghai Lu
2010-01-21 6:27 ` [PATCH 10/36] x86: make early_node_mem get mem > 4g if possible Yinghai Lu
2010-01-21 6:27 ` [PATCH 11/36] x86: only call dma32_reserve_bootmem 64bit !CONFIG_NUMA Yinghai Lu
2010-01-21 6:27 ` [PATCH 12/36] x86: make 64 bit use early_res instead of bootmem before slab Yinghai Lu
2010-01-21 6:28 ` [PATCH 13/36] sparsemem: put usemap for one node together Yinghai Lu
2010-01-21 6:28 ` [PATCH 14/36] sparsemem: put mem map " Yinghai Lu
2010-01-21 6:28 ` [PATCH 15/36] x86: change range end to start+size Yinghai Lu
2010-01-21 6:28 ` [PATCH 16/36] x86: move bios page reserve early to head32/64.c Yinghai Lu
2010-01-21 6:28 ` [PATCH 17/36] x86: seperate early_res related code from e820.c Yinghai Lu
2010-01-21 6:28 ` [PATCH 18/36] x86: add find_early_area_size Yinghai Lu
2010-01-21 6:28 ` [PATCH 19/36] x86: move back find_e820_area to e820.c Yinghai Lu
2010-01-21 6:28 ` [PATCH 20/36] early_res: enhance check_and_double_early_res Yinghai Lu
2010-01-21 6:28 ` [PATCH 21/36] x86: make 32bit support NO_BOOTMEM Yinghai Lu
2010-01-21 6:28 ` [PATCH 22/36] move round_up/down to kernel.h Yinghai Lu
2010-01-21 20:48 ` Christoph Lameter
2010-01-21 23:14 ` Andi Kleen
2010-01-21 6:28 ` [PATCH 23/36] x86: add find_fw_memmap_area Yinghai Lu
2010-01-21 6:28 ` [PATCH 24/36] core: move early_res Yinghai Lu
2010-01-21 6:28 ` [PATCH 25/36] x86: print out for RAM buffer Yinghai Lu
2010-01-21 6:28 ` [PATCH 26/36] x86: remove bios data range from e820 Yinghai Lu
2010-01-21 6:28 ` [PATCH 27/36] x86/pci: add mmconf range into e820 for when it is from MSR with amd faml0h Yinghai Lu
2010-01-21 6:28 ` [PATCH 28/36] irq: remove not need bootmem code Yinghai Lu
2010-01-21 6:28 ` [PATCH 29/36] radix: move radix init early Yinghai Lu
2010-01-21 6:28 ` [PATCH 30/36] sparseirq: change irq_desc_ptrs to static Yinghai Lu
2010-01-21 6:28 ` [PATCH 31/36] sparseirq: use radix_tree instead of ptrs array Yinghai Lu
2010-01-21 6:28 ` [PATCH 32/36] x86: remove arch_probe_nr_irqs Yinghai Lu
2010-01-21 6:28 ` [PATCH 33/36] use nr_cpus= to set nr_cpu_ids early Yinghai Lu
2010-01-21 6:28 ` [PATCH 34/36] x86: according to nr_cpu_ids to decide if need to leave logical flat Yinghai Lu
2010-01-21 6:28 ` Yinghai Lu [this message]
2010-01-21 6:28 ` [PATCH 36/36] x86: use num_processors for possible cpus Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1264055303-15123-36-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=cl@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox