[PATCH 07/38] x86/pci: enable pci root res read out for 32bit too

[Yinghai Lu <yinghai@kernel.org>]

should be good for 32bit too.

-v3: cast res->start
-v4: according to Linus, to use %pR instead of cast

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/x86/pci/Makefile    |    3 +--
 arch/x86/pci/amd_bus.c   |   18 ++----------------
 arch/x86/pci/bus_numa.h  |    4 ++--
 arch/x86/pci/i386.c      |    4 ----
 arch/x86/pci/intel_bus.c |    7 ++-----
 5 files changed, 7 insertions(+), 29 deletions(-)

diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index 564b008..30e55d7 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -14,8 +14,7 @@ obj-$(CONFIG_X86_VISWS)		+= visws.o
 obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
 
 obj-y				+= common.o early.o
-obj-y				+= amd_bus.o
-obj-$(CONFIG_X86_64)		+= bus_numa.o intel_bus.o
+obj-y				+= amd_bus.o bus_numa.o intel_bus.o
 
 ifeq ($(CONFIG_PCI_DEBUG),y)
 EXTRA_CFLAGS += -DDEBUG
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index 9bcb6fe..badef12 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -6,9 +6,7 @@
 
 #include <asm/pci_x86.h>
 
-#ifdef CONFIG_X86_64
 #include <asm/pci-direct.h>
-#endif
 
 #include "bus_numa.h"
 
@@ -17,8 +15,6 @@
  * also get peer root bus resource for io,mmio
  */
 
-#ifdef CONFIG_X86_64
-
 struct pci_hostbridge_probe {
 	u32 bus;
 	u32 slot;
@@ -339,24 +335,14 @@ static int __init early_fill_mp_bus_info(void)
 		       info->bus_min, info->bus_max, info->node, info->link);
 		for (j = 0; j < res_num; j++) {
 			res = &info->res[j];
-			printk(KERN_DEBUG "bus: %02x index %x %s: [%llx, %llx]\n",
-			       busnum, j,
-			       (res->flags & IORESOURCE_IO)?"io port":"mmio",
-			       res->start, res->end);
+			printk(KERN_DEBUG "bus: %02x index %x %pR\n",
+				       busnum, j, res);
 		}
 	}
 
 	return 0;
 }
 
-#else  /* !CONFIG_X86_64 */
-
-static int __init early_fill_mp_bus_info(void) { return 0; }
-
-#endif /* !CONFIG_X86_64 */
-
-/* common 32/64 bit code */
-
 #define ENABLE_CF8_EXT_CFG      (1ULL << 46)
 
 static void enable_pci_io_ecs(void *unused)
diff --git a/arch/x86/pci/bus_numa.h b/arch/x86/pci/bus_numa.h
index f63e802..08d8e15 100644
--- a/arch/x86/pci/bus_numa.h
+++ b/arch/x86/pci/bus_numa.h
@@ -1,5 +1,5 @@
-#ifdef CONFIG_X86_64
-
+#ifndef __BUS_NUMA_H
+#define __BUS_NUMA_H
 /*
  * sub bus (transparent) will use entres from 3 to store extra from
  * root, so need to make sure we have enough slot there, Should we
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 5dc9e8c..f4e8481 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -257,10 +257,6 @@ void __init pcibios_resource_survey(void)
  */
 fs_initcall(pcibios_assign_resources);
 
-void __weak x86_pci_root_bus_res_quirks(struct pci_bus *b)
-{
-}
-
 /*
  *  If we set up a device for bus mastering, we need to check the latency
  *  timer as certain crappy BIOSes forget to set it properly.
diff --git a/arch/x86/pci/intel_bus.c b/arch/x86/pci/intel_bus.c
index 145e0dd..187f50e 100644
--- a/arch/x86/pci/intel_bus.c
+++ b/arch/x86/pci/intel_bus.c
@@ -26,11 +26,8 @@ static inline void print_ioh_resources(struct pci_root_info *info)
 		struct resource *res;
 
 		res = &info->res[i];
-		printk(KERN_DEBUG "IOH bus: %02x index %x %s: [%llx, %llx]\n",
-			busnum, i,
-			(res->flags & IORESOURCE_IO) ? "io port" :
-							"mmio",
-			res->start, res->end);
+		printk(KERN_DEBUG "IOH bus: %02x index %x %pR\n",
+				busnum, i, res);
 	}
 }
 
-- 
1.6.4.2