From: Yinghai Lu <yinghai@kernel.org>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>,
Christoph Lameter <cl@linux-foundation.org>,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH 08/38] x86: call early_res_to_bootmem one time
Date: Fri, 22 Jan 2010 01:24:17 -0800 [thread overview]
Message-ID: <1264152287-13866-9-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1264152287-13866-1-git-send-email-yinghai@kernel.org>
simplify setup_node_mem, do use bootmem from other node.
instead just find_e820_area in early_node_mem.
so we can keep the boundary between early_res and boot mem more clear.
and only call civertion one time instead of for all nodes.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/kernel/setup.c | 1 +
arch/x86/mm/init_32.c | 1 -
arch/x86/mm/init_64.c | 3 +-
arch/x86/mm/numa_64.c | 62 +++++++++++++++-------------------------------
4 files changed, 22 insertions(+), 45 deletions(-)
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index f7b8b98..3ab0bf4 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -942,6 +942,7 @@ void __init setup_arch(char **cmdline_p)
#endif
initmem_init(0, max_pfn, acpi, k8);
+ early_res_to_bootmem(0, max_low_pfn<<PAGE_SHIFT);
#ifdef CONFIG_X86_64
/*
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 9a0c258..2dccde0 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -764,7 +764,6 @@ static unsigned long __init setup_node_bootmem(int nodeid,
printk(KERN_INFO " node %d bootmap %08lx - %08lx\n",
nodeid, bootmap, bootmap + bootmap_size);
free_bootmem_with_active_regions(nodeid, end_pfn);
- early_res_to_bootmem(start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT);
return bootmap + bootmap_size;
}
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 5198b9b..1ea79ad 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -578,13 +578,12 @@ void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn,
PAGE_SIZE);
if (bootmap == -1L)
panic("Cannot find bootmem map of size %ld\n", bootmap_size);
+ reserve_early(bootmap, bootmap + bootmap_size, "BOOTMAP");
/* don't touch min_low_pfn */
bootmap_size = init_bootmem_node(NODE_DATA(0), bootmap >> PAGE_SHIFT,
0, end_pfn);
e820_register_active_regions(0, start_pfn, end_pfn);
free_bootmem_with_active_regions(0, end_pfn);
- early_res_to_bootmem(0, end_pfn<<PAGE_SHIFT);
- reserve_bootmem(bootmap, bootmap_size, BOOTMEM_DEFAULT);
}
#endif
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index 83bbc70..3232148 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -164,18 +164,21 @@ static void * __init early_node_mem(int nodeid, unsigned long start,
unsigned long align)
{
unsigned long mem = find_e820_area(start, end, size, align);
- void *ptr;
if (mem != -1L)
return __va(mem);
- ptr = __alloc_bootmem_nopanic(size, align, __pa(MAX_DMA_ADDRESS));
- if (ptr == NULL) {
- printk(KERN_ERR "Cannot find %lu bytes in node %d\n",
+
+ start = __pa(MAX_DMA_ADDRESS);
+ end = max_low_pfn_mapped << PAGE_SHIFT;
+ mem = find_e820_area(start, end, size, align);
+ if (mem != -1L)
+ return __va(mem);
+
+ printk(KERN_ERR "Cannot find %lu bytes in node %d\n",
size, nodeid);
- return NULL;
- }
- return ptr;
+
+ return NULL;
}
/* Initialize bootmem allocator for a node */
@@ -211,8 +214,12 @@ setup_node_bootmem(int nodeid, unsigned long start, unsigned long end)
if (node_data[nodeid] == NULL)
return;
nodedata_phys = __pa(node_data[nodeid]);
+ reserve_early(nodedata_phys, nodedata_phys + pgdat_size, "NODE_DATA");
printk(KERN_INFO " NODE_DATA [%016lx - %016lx]\n", nodedata_phys,
nodedata_phys + pgdat_size - 1);
+ nid = phys_to_nid(nodedata_phys);
+ if (nid != nodeid)
+ printk(KERN_INFO " NODE_DATA(%d) on node %d\n", nodeid, nid);
memset(NODE_DATA(nodeid), 0, sizeof(pg_data_t));
NODE_DATA(nodeid)->bdata = &bootmem_node_data[nodeid];
@@ -227,11 +234,7 @@ setup_node_bootmem(int nodeid, unsigned long start, unsigned long end)
* of alloc_bootmem, that could clash with reserved range
*/
bootmap_pages = bootmem_bootmap_pages(last_pfn - start_pfn);
- nid = phys_to_nid(nodedata_phys);
- if (nid == nodeid)
- bootmap_start = roundup(nodedata_phys + pgdat_size, PAGE_SIZE);
- else
- bootmap_start = roundup(start, PAGE_SIZE);
+ bootmap_start = roundup(nodedata_phys + pgdat_size, PAGE_SIZE);
/*
* SMP_CACHE_BYTES could be enough, but init_bootmem_node like
* to use that to align to PAGE_SIZE
@@ -239,18 +242,13 @@ setup_node_bootmem(int nodeid, unsigned long start, unsigned long end)
bootmap = early_node_mem(nodeid, bootmap_start, end,
bootmap_pages<<PAGE_SHIFT, PAGE_SIZE);
if (bootmap == NULL) {
- if (nodedata_phys < start || nodedata_phys >= end) {
- /*
- * only need to free it if it is from other node
- * bootmem
- */
- if (nid != nodeid)
- free_bootmem(nodedata_phys, pgdat_size);
- }
+ free_early(nodedata_phys, nodedata_phys + pgdat_size);
node_data[nodeid] = NULL;
return;
}
bootmap_start = __pa(bootmap);
+ reserve_early(bootmap_start, bootmap_start+(bootmap_pages<<PAGE_SHIFT),
+ "BOOTMAP");
bootmap_size = init_bootmem_node(NODE_DATA(nodeid),
bootmap_start >> PAGE_SHIFT,
@@ -259,31 +257,11 @@ setup_node_bootmem(int nodeid, unsigned long start, unsigned long end)
printk(KERN_INFO " bootmap [%016lx - %016lx] pages %lx\n",
bootmap_start, bootmap_start + bootmap_size - 1,
bootmap_pages);
-
- free_bootmem_with_active_regions(nodeid, end);
-
- /*
- * convert early reserve to bootmem reserve earlier
- * otherwise early_node_mem could use early reserved mem
- * on previous node
- */
- early_res_to_bootmem(start, end);
-
- /*
- * in some case early_node_mem could use alloc_bootmem
- * to get range on other node, don't reserve that again
- */
- if (nid != nodeid)
- printk(KERN_INFO " NODE_DATA(%d) on node %d\n", nodeid, nid);
- else
- reserve_bootmem_node(NODE_DATA(nodeid), nodedata_phys,
- pgdat_size, BOOTMEM_DEFAULT);
nid = phys_to_nid(bootmap_start);
if (nid != nodeid)
printk(KERN_INFO " bootmap(%d) on node %d\n", nodeid, nid);
- else
- reserve_bootmem_node(NODE_DATA(nodeid), bootmap_start,
- bootmap_pages<<PAGE_SHIFT, BOOTMEM_DEFAULT);
+
+ free_bootmem_with_active_regions(nodeid, end);
node_set_online(nodeid);
}
--
1.6.4.2
next prev parent reply other threads:[~2010-01-22 9:25 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-22 9:24 [PATCH -v5 0/38] x86: not use bootmem for x86 Yinghai Lu
2010-01-22 9:24 ` [PATCH 01/38] x86: move range related operation to one file Yinghai Lu
2010-01-22 9:24 ` [PATCH 02/38] x86: check range in update range Yinghai Lu
2010-01-22 9:24 ` [PATCH 03/38] x86/pci: use resource_size_t in update_res Yinghai Lu
2010-01-22 9:24 ` [PATCH 04/38] x86/pci: amd one chain system to use pci read out res Yinghai Lu
2010-01-22 9:24 ` [PATCH 05/38] x86/pci: use u64 instead of size_t in amd_bus.c Yinghai Lu
2010-01-22 9:24 ` [PATCH 06/38] x86/pci: add cap_resource Yinghai Lu
2010-01-22 9:24 ` [PATCH 07/38] x86/pci: enable pci root res read out for 32bit too Yinghai Lu
2010-01-22 9:24 ` Yinghai Lu [this message]
2010-01-22 9:24 ` [PATCH 09/38] x86: introduce max_early_res and early_res_count Yinghai Lu
2010-01-22 9:24 ` [PATCH 10/38] x86: dynamic increase early_res array size Yinghai Lu
2010-01-22 9:24 ` [PATCH 11/38] x86: print bootmem free before pci_iommu_alloc and free_all_bootmem -v2 Yinghai Lu
2010-01-22 9:24 ` [PATCH 12/38] x86: make early_node_mem get mem > 4g if possible Yinghai Lu
2010-01-22 9:24 ` [PATCH 13/38] x86: only call dma32_reserve_bootmem 64bit !CONFIG_NUMA Yinghai Lu
2010-01-22 9:24 ` [PATCH 14/38] x86: make 64 bit use early_res instead of bootmem before slab Yinghai Lu
2010-01-22 9:24 ` [PATCH 15/38] sparsemem: put usemap for one node together Yinghai Lu
2010-01-22 9:24 ` [PATCH 16/38] sparsemem: put mem map " Yinghai Lu
2010-01-22 9:24 ` [PATCH 17/38] x86: change range end to start+size Yinghai Lu
2010-01-22 9:24 ` [PATCH 18/38] x86: move bios page reserve early to head32/64.c Yinghai Lu
2010-01-22 9:24 ` [PATCH 19/38] x86: seperate early_res related code from e820.c Yinghai Lu
2010-01-22 9:24 ` [PATCH 20/38] x86: add find_early_area_size Yinghai Lu
2010-01-22 9:24 ` [PATCH 21/38] x86: move back find_e820_area to e820.c Yinghai Lu
2010-01-22 9:24 ` [PATCH 22/38] early_res: enhance check_and_double_early_res Yinghai Lu
2010-01-22 9:24 ` [PATCH 23/38] x86: make 32bit support NO_BOOTMEM Yinghai Lu
2010-01-22 9:24 ` [PATCH 24/38] move round_up/down to kernel.h Yinghai Lu
2010-01-22 14:52 ` Christoph Lameter
2010-01-22 19:28 ` Joe Perches
2010-01-22 20:08 ` H. Peter Anvin
2010-01-22 9:24 ` [PATCH 25/38] x86: add find_fw_memmap_area Yinghai Lu
2010-01-22 9:24 ` [PATCH 26/38] core: move early_res Yinghai Lu
2010-01-22 9:24 ` [PATCH 27/38] x86: print out for RAM buffer Yinghai Lu
2010-01-22 9:24 ` [PATCH 28/38] x86: remove bios data range from e820 Yinghai Lu
2010-01-22 9:24 ` [PATCH 29/38] x86/pci: add mmconf range into e820 for when it is from MSR with amd faml0h Yinghai Lu
2010-01-22 9:24 ` [PATCH 30/38] irq: remove not need bootmem code Yinghai Lu
2010-01-22 9:24 ` [PATCH 31/38] radix: move radix init early Yinghai Lu
2010-01-22 9:24 ` [PATCH 32/38] sparseirq: change irq_desc_ptrs to static Yinghai Lu
2010-01-22 9:24 ` [PATCH 33/38] sparseirq: use radix_tree instead of ptrs array Yinghai Lu
2010-01-22 9:24 ` [PATCH 34/38] x86: remove arch_probe_nr_irqs Yinghai Lu
2010-01-22 9:24 ` [PATCH 35/38] use nr_cpus= to set nr_cpu_ids early Yinghai Lu
2010-01-22 9:24 ` [PATCH 36/38] x86: according to nr_cpu_ids to decide if need to leave logical flat Yinghai Lu
2010-01-22 9:24 ` [PATCH 37/38] x86: make 32bit apic flat to physflat switch like 64bit Yinghai Lu
2010-01-22 9:24 ` [PATCH 38/38] x86: use num_processors for possible cpus Yinghai Lu
2010-01-26 0:40 ` [PATCH -v5 0/38] x86: not use bootmem for x86 H. Peter Anvin
2010-01-26 2:14 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1264152287-13866-9-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=cl@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox