From: Maxim Levitsky <maximlevitsky@gmail.com>
To: David Woodhouse <dwmw2@infradead.org>
Cc: Artem Bityutskiy <dedekind1@gmail.com>,
linux-mtd <linux-mtd@lists.infradead.org>,
linux-kernel <linux-kernel@vger.kernel.org>,
Alex Dubov <oakad@yahoo.com>, joern <joern@logfs.org>,
Thomas Gleixner <tglx@linutronix.de>,
"stanley.miao" <stanley.miao@windriver.com>,
Vitaly Wool <vitalywool@gmail.com>,
Maxim Levitsky <maximlevitsky@gmail.com>
Subject: [PATCH 10/17] MTD: nand: cleanup nand_do_write_ops
Date: Tue, 9 Feb 2010 18:57:38 +0200 [thread overview]
Message-ID: <1265734665-22656-11-git-send-email-maximlevitsky@gmail.com> (raw)
In-Reply-To: <1265734665-22656-1-git-send-email-maximlevitsky@gmail.com>
nand_do_write_ops have broken in regard to writing several pages each with its own oob
Although nand_do_write_ops intends to allow such mode, it fails do do so
Probably this was never tested.
Also add missing checks for attemts to write at illegal offsets
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
---
drivers/mtd/nand/nand_base.c | 24 +++++++++++++++++-------
1 files changed, 17 insertions(+), 7 deletions(-)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 405c538..64b0f10 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -1884,11 +1884,9 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
* @oob: oob data buffer
* @ops: oob ops structure
*/
-static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob,
- struct mtd_oob_ops *ops)
+static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob, size_t len,
+ struct mtd_oob_ops *ops)
{
- size_t len = ops->ooblen;
-
switch(ops->mode) {
case MTD_OOB_PLACE:
@@ -1943,6 +1941,11 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
int chipnr, realpage, page, blockmask, column;
struct nand_chip *chip = mtd->priv;
uint32_t writelen = ops->len;
+
+ uint32_t oobwritelen = ops->ooblen;
+ uint32_t oobmaxlen = ops->mode == MTD_OOB_AUTO ?
+ mtd->oobavail : mtd->oobsize;
+
uint8_t *oob = ops->oobbuf;
uint8_t *buf = ops->datbuf;
int ret, subpage;
@@ -1984,6 +1987,10 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
if (likely(!oob))
memset(chip->oob_poi, 0xff, mtd->oobsize);
+ /* Don't allow multipage oob writes with offset */
+ if (ops->ooboffs && (ops->ooboffs + ops->ooblen > oobmaxlen))
+ return -EINVAL;
+
while(1) {
int bytes = mtd->writesize;
int cached = writelen > bytes && page != blockmask;
@@ -1999,8 +2006,11 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
wbuf = chip->buffers->databuf;
}
- if (unlikely(oob))
- oob = nand_fill_oob(chip, oob, ops);
+ if (unlikely(oob)) {
+ size_t len = min(oobwritelen, oobmaxlen);
+ oob = nand_fill_oob(chip, oob, len, ops);
+ oobwritelen -= len;
+ }
ret = chip->write_page(mtd, chip, wbuf, page, cached,
(ops->mode == MTD_OOB_RAW));
@@ -2174,7 +2184,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
chip->pagebuf = -1;
memset(chip->oob_poi, 0xff, mtd->oobsize);
- nand_fill_oob(chip, ops->oobbuf, ops);
+ nand_fill_oob(chip, ops->oobbuf, ops->ooblen, ops);
status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
memset(chip->oob_poi, 0xff, mtd->oobsize);
--
1.6.3.3
next prev parent reply other threads:[~2010-02-09 16:59 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-09 16:57 [PATCH 0/17 V7] Work to enable SmartMedia/xD support in mtd subsystem Maxim Levitsky
2010-02-09 16:57 ` [PATCH 01/17] MTD: create lockless versions of {get,put}_mtd_device This will be used to resolve deadlock in block translation layer Maxim Levitsky
2010-02-09 17:14 ` Peter Zijlstra
2010-02-09 17:23 ` Maxim Levitsky
2010-02-09 17:46 ` Maxim Levitsky
2010-02-10 21:22 ` Maxim Levitsky
2010-02-09 16:57 ` [PATCH 02/17] blktrans: nuke mtd_blkcore_priv and make both thread and disk queue be per device Maxim Levitsky
2010-02-09 16:57 ` [PATCH 03/17] blktrans: track open and close calls Maxim Levitsky
2010-02-09 16:57 ` [PATCH 04/17] blktrans: don't free mtd_blktrans_dev, core will do that for you Maxim Levitsky
2010-02-09 16:57 ` [PATCH 05/17] blktrans: add proper locking Maxim Levitsky
2010-02-09 16:57 ` [PATCH 06/17] blktrans: flush all requests before we remove the device Maxim Levitsky
2010-02-09 16:57 ` [PATCH 07/17] blktrans: allow FTL drivers to export sysfs attributes Maxim Levitsky
2010-02-09 16:57 ` [PATCH 08/17] MTD: call remove notifiers before removing the device Maxim Levitsky
2010-02-09 16:57 ` [PATCH 09/17] MTD: nand: make MTD_OOB_PLACE work correctly Maxim Levitsky
2010-02-09 16:57 ` Maxim Levitsky [this message]
2010-02-09 16:57 ` [PATCH 11/17] MTD: nand: make suspend work if device is accessed by kernel threads Maxim Levitsky
2010-02-09 16:57 ` [PATCH 12/17] MTD: nand: make reads using MTD_OOB_RAW affect only ECC validation Maxim Levitsky
2010-02-09 16:57 ` [PATCH 13/17] NAND: make ->check_bad more user friendly Maxim Levitsky
2010-02-09 16:57 ` [PATCH 14/17] MTD: common module for smartmedia/xD support Maxim Levitsky
2010-02-09 16:57 ` [PATCH 15/17] MTD: add few workarounds to nand system for SmartMedia/xD chips Maxim Levitsky
2010-02-09 16:57 ` [PATCH 16/17] MTD: Add nand driver for ricoh xD/SmartMedia reader Maxim Levitsky
2010-02-09 16:57 ` [PATCH 17/17] MTD: Add new SmartMedia/xD FTL Maxim Levitsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1265734665-22656-11-git-send-email-maximlevitsky@gmail.com \
--to=maximlevitsky@gmail.com \
--cc=dedekind1@gmail.com \
--cc=dwmw2@infradead.org \
--cc=joern@logfs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=oakad@yahoo.com \
--cc=stanley.miao@windriver.com \
--cc=tglx@linutronix.de \
--cc=vitalywool@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).