linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yinghai Lu <yinghai@kernel.org>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
	"H. Peter Anvin" <hpa@zytor.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>,
	Christoph Lameter <cl@linux-foundation.org>,
	linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
	Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH 17/35] sparsemem: put usemap for one node together
Date: Wed, 10 Feb 2010 01:20:21 -0800	[thread overview]
Message-ID: <1265793639-15071-18-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1265793639-15071-1-git-send-email-yinghai@kernel.org>

could save some buf instead of applying one by one

could help that system that is going to use early_res instead of bootmem
less entries in early_res make search more faster on system with more memory.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
 mm/sparse.c |   84 ++++++++++++++++++++++++++++++++++++++++++++++------------
 1 files changed, 66 insertions(+), 18 deletions(-)

diff --git a/mm/sparse.c b/mm/sparse.c
index 6ce4aab..0cdaf0b 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -271,7 +271,8 @@ static unsigned long *__kmalloc_section_usemap(void)
 
 #ifdef CONFIG_MEMORY_HOTREMOVE
 static unsigned long * __init
-sparse_early_usemap_alloc_pgdat_section(struct pglist_data *pgdat)
+sparse_early_usemaps_alloc_pgdat_section(struct pglist_data *pgdat,
+					 unsigned long count)
 {
 	unsigned long section_nr;
 
@@ -286,7 +287,7 @@ sparse_early_usemap_alloc_pgdat_section(struct pglist_data *pgdat)
 	 * this problem.
 	 */
 	section_nr = pfn_to_section_nr(__pa(pgdat) >> PAGE_SHIFT);
-	return alloc_bootmem_section(usemap_size(), section_nr);
+	return alloc_bootmem_section(usemap_size() * count, section_nr);
 }
 
 static void __init check_usemap_section_nr(int nid, unsigned long *usemap)
@@ -329,7 +330,8 @@ static void __init check_usemap_section_nr(int nid, unsigned long *usemap)
 }
 #else
 static unsigned long * __init
-sparse_early_usemap_alloc_pgdat_section(struct pglist_data *pgdat)
+sparse_early_usemaps_alloc_pgdat_section(struct pglist_data *pgdat,
+					 unsigned long count)
 {
 	return NULL;
 }
@@ -339,27 +341,40 @@ static void __init check_usemap_section_nr(int nid, unsigned long *usemap)
 }
 #endif /* CONFIG_MEMORY_HOTREMOVE */
 
-static unsigned long *__init sparse_early_usemap_alloc(unsigned long pnum)
+static void __init sparse_early_usemaps_alloc_node(unsigned long**usemap_map,
+				 unsigned long pnum_begin,
+				 unsigned long pnum_end,
+				 unsigned long usemap_count, int nodeid)
 {
-	unsigned long *usemap;
-	struct mem_section *ms = __nr_to_section(pnum);
-	int nid = sparse_early_nid(ms);
-
-	usemap = sparse_early_usemap_alloc_pgdat_section(NODE_DATA(nid));
-	if (usemap)
-		return usemap;
+	void *usemap;
+	unsigned long pnum;
+	int size = usemap_size();
 
-	usemap = alloc_bootmem_node(NODE_DATA(nid), usemap_size());
+	usemap = sparse_early_usemaps_alloc_pgdat_section(NODE_DATA(nodeid),
+								 usemap_count);
 	if (usemap) {
-		check_usemap_section_nr(nid, usemap);
-		return usemap;
+		for (pnum = pnum_begin; pnum < pnum_end; pnum++) {
+			if (!present_section_nr(pnum))
+				continue;
+			usemap_map[pnum] = usemap;
+			usemap += size;
+		}
+		return;
 	}
 
-	/* Stupid: suppress gcc warning for SPARSEMEM && !NUMA */
-	nid = 0;
+	usemap = alloc_bootmem_node(NODE_DATA(nodeid), size * usemap_count);
+	if (usemap) {
+		for (pnum = pnum_begin; pnum < pnum_end; pnum++) {
+			if (!present_section_nr(pnum))
+				continue;
+			usemap_map[pnum] = usemap;
+			usemap += size;
+			check_usemap_section_nr(nodeid, usemap_map[pnum]);
+		}
+		return;
+	}
 
 	printk(KERN_WARNING "%s: allocation failed\n", __func__);
-	return NULL;
 }
 
 #ifndef CONFIG_SPARSEMEM_VMEMMAP
@@ -396,6 +411,7 @@ static struct page __init *sparse_early_mem_map_alloc(unsigned long pnum)
 void __attribute__((weak)) __meminit vmemmap_populate_print_last(void)
 {
 }
+
 /*
  * Allocate the accumulated non-linear sections, allocate a mem_map
  * for each and record the physical to section mapping.
@@ -407,6 +423,9 @@ void __init sparse_init(void)
 	unsigned long *usemap;
 	unsigned long **usemap_map;
 	int size;
+	int nodeid_begin = 0;
+	unsigned long pnum_begin = 0;
+	unsigned long usemap_count;
 
 	/*
 	 * map is using big page (aka 2M in x86 64 bit)
@@ -425,10 +444,39 @@ void __init sparse_init(void)
 		panic("can not allocate usemap_map\n");
 
 	for (pnum = 0; pnum < NR_MEM_SECTIONS; pnum++) {
+		struct mem_section *ms;
+
 		if (!present_section_nr(pnum))
 			continue;
-		usemap_map[pnum] = sparse_early_usemap_alloc(pnum);
+		ms = __nr_to_section(pnum);
+		nodeid_begin = sparse_early_nid(ms);
+		pnum_begin = pnum;
+		break;
+	}
+	usemap_count = 1;
+	for (pnum = pnum_begin + 1; pnum < NR_MEM_SECTIONS; pnum++) {
+		struct mem_section *ms;
+		int nodeid;
+
+		if (!present_section_nr(pnum))
+			continue;
+		ms = __nr_to_section(pnum);
+		nodeid = sparse_early_nid(ms);
+		if (nodeid == nodeid_begin) {
+			usemap_count++;
+			continue;
+		}
+		/* ok, we need to take cake of from pnum_begin to pnum - 1*/
+		sparse_early_usemaps_alloc_node(usemap_map, pnum_begin, pnum,
+						 usemap_count, nodeid_begin);
+		/* new start, update count etc*/
+		nodeid_begin = nodeid;
+		pnum_begin = pnum;
+		usemap_count = 1;
 	}
+	/* ok, last chunk */
+	sparse_early_usemaps_alloc_node(usemap_map, pnum_begin, NR_MEM_SECTIONS,
+					 usemap_count, nodeid_begin);
 
 	for (pnum = 0; pnum < NR_MEM_SECTIONS; pnum++) {
 		if (!present_section_nr(pnum))
-- 
1.6.4.2


  parent reply	other threads:[~2010-02-10  9:26 UTC|newest]

Thread overview: 83+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-02-10  9:20 [PATCH -v7 0/35] tip related: not use bootmem for x86 Yinghai Lu
2010-02-10  9:20 ` [PATCH 01/35] x86: fix sci on ioapic 1 Yinghai Lu
2010-02-10 22:48   ` [tip:x86/urgent] x86: Fix SCI on IOAPIC != 0 tip-bot for Yinghai Lu
2010-02-10  9:20 ` [PATCH 02/35] x86: keep chip_data in create_irq_nr and destroy_irq Yinghai Lu
2010-02-10 22:39   ` [tip:x86/irq] x86: Avoid race condition in pci_enable_msix() tip-bot for Brandon Phiilps
2010-02-10  9:20 ` [PATCH 03/35] x86: move range related operation to one file Yinghai Lu
2010-02-10  9:20 ` [PATCH 04/35] x86/pci: use resource_size_t in update_res Yinghai Lu
2010-02-10  9:20 ` [PATCH 05/35] x86/pci: amd one chain system to use pci read out res Yinghai Lu
2010-02-10  9:20 ` [PATCH 06/35] x86/pci: use u64 instead of size_t in amd_bus.c Yinghai Lu
2010-02-10  9:20 ` [PATCH 07/35] x86/pci: add cap_resource Yinghai Lu
2010-02-10  9:20 ` [PATCH 08/35] x86/pci: enable pci root res read out for 32bit too Yinghai Lu
2010-02-10  9:20 ` [PATCH 09/35] x86: change range end to start+size Yinghai Lu
2010-02-10  9:20 ` [PATCH 10/35] x86: print out for RAM buffer Yinghai Lu
2010-02-10  9:20 ` [PATCH 11/35] x86: call early_res_to_bootmem one time Yinghai Lu
2010-02-10  9:20 ` [PATCH 12/35] x86: introduce max_early_res and early_res_count Yinghai Lu
2010-02-10  9:20 ` [PATCH 13/35] x86: dynamic increase early_res array size Yinghai Lu
2010-02-10  9:20 ` [PATCH 14/35] x86: make early_node_mem get mem > 4g if possible Yinghai Lu
2010-02-10  9:20 ` [PATCH 15/35] x86: only call dma32_reserve_bootmem 64bit !CONFIG_NUMA Yinghai Lu
2010-02-10  9:20 ` [PATCH 16/35] x86: make 64 bit use early_res instead of bootmem before slab Yinghai Lu
2010-02-14 14:08   ` Stephen Rothwell
2010-02-14 20:31     ` Yinghai Lu
2010-02-17  1:16     ` Yinghai Lu
2010-02-24 22:59       ` Peter Zijlstra
2010-02-24 23:29         ` Yinghai Lu
2010-02-24 23:32           ` Yinghai Lu
2010-02-25  2:07             ` Tejun Heo
2010-02-25  2:13               ` Yinghai Lu
2010-02-25  2:33                 ` Tejun Heo
2010-02-25  2:36               ` [PATCH] early_res: add free_early_partial Yinghai Lu
2010-02-25 11:10                 ` Peter Zijlstra
2010-03-02  2:48                 ` [PATCH] early_res: need to save name aside with free_early_partial Yinghai Lu
2010-02-10  9:20 ` Yinghai Lu [this message]
2010-02-10  9:20 ` [PATCH 18/35] sparsemem: put mem map for one node together Yinghai Lu
2010-02-10  9:20 ` [PATCH 19/35] x86: move bios page reserve early to head32/64.c Yinghai Lu
2010-02-10  9:20 ` [PATCH 20/35] x86: seperate early_res related code from e820.c Yinghai Lu
2010-02-10  9:20 ` [PATCH 21/35] x86: add find_early_area_size Yinghai Lu
2010-02-10  9:20 ` [PATCH 22/35] x86: move back find_e820_area to e820.c Yinghai Lu
2010-02-10  9:20 ` [PATCH 23/35] early_res: enhance check_and_double_early_res Yinghai Lu
2010-02-10  9:20 ` [PATCH 24/35] x86: make 32bit support NO_BOOTMEM Yinghai Lu
2010-02-10  9:20 ` [PATCH 25/35] move round_up/down to kernel.h Yinghai Lu
2010-02-13 18:49   ` Joe Perches
2010-02-13 19:52     ` H. Peter Anvin
2010-02-13 20:11       ` Andrew Morton
2010-02-13 21:57         ` H. Peter Anvin
2010-02-10  9:20 ` [PATCH 26/35] x86: add find_fw_memmap_area Yinghai Lu
2010-02-10  9:20 ` [PATCH 27/35] core: move early_res Yinghai Lu
2010-02-14 14:16   ` Stephen Rothwell
2010-02-14 17:08     ` Ingo Molnar
2010-02-14 23:43       ` Stephen Rothwell
2010-02-15  4:44         ` Ingo Molnar
2010-02-14 20:46     ` Yinghai Lu
2010-02-16 23:46       ` H. Peter Anvin
2010-02-16 23:53         ` Yinghai Lu
2010-02-17  0:01           ` H. Peter Anvin
2010-02-17  0:41             ` Yinghai Lu
2010-02-17  0:46               ` H. Peter Anvin
2010-02-17  1:10                 ` Yinghai Lu
2010-02-17  2:40                   ` Yinghai Lu
2010-02-10  9:20 ` [PATCH 28/35] irq: remove not need bootmem code Yinghai Lu
2010-02-18  1:57   ` [tip:x86/irq] irq: Remove unnecessary " tip-bot for Yinghai Lu
2010-02-10  9:20 ` [PATCH 29/35] radix: move radix init early Yinghai Lu
2010-02-18  1:57   ` [tip:x86/irq] init: Move radix_tree_init() early tip-bot for Yinghai Lu
2010-02-10  9:20 ` [PATCH 30/35] sparseirq: change irq_desc_ptrs to static Yinghai Lu
2010-02-18  1:58   ` [tip:x86/irq] sparseirq: Change " tip-bot for Yinghai Lu
2010-02-10  9:20 ` [PATCH 31/35] sparseirq: use radix_tree instead of ptrs array Yinghai Lu
2010-02-18  1:58   ` [tip:x86/irq] sparseirq: Use " tip-bot for Yinghai Lu
2010-02-10  9:20 ` [PATCH 32/35] x86: remove arch_probe_nr_irqs Yinghai Lu
2010-02-18  1:58   ` [tip:x86/irq] x86, irq: Remove arch_probe_nr_irqs tip-bot for Yinghai Lu
2010-02-10  9:20 ` [PATCH 33/35] use nr_cpus= to set nr_cpu_ids early Yinghai Lu
2010-02-18  1:59   ` [tip:x86/irq] smp: Use " tip-bot for Yinghai Lu
2010-02-10  9:20 ` [PATCH 34/35] x86: use num_processors for possible cpus Yinghai Lu
2010-02-18  1:32   ` H. Peter Anvin
2010-02-18  2:38     ` Yinghai Lu
2010-02-18 17:26       ` H. Peter Anvin
2010-02-18 19:48         ` Christoph Lameter
2010-02-18 19:53           ` H. Peter Anvin
2010-02-19 15:14             ` Christoph Lameter
2010-02-19 16:14               ` H. Peter Anvin
2010-02-10  9:20 ` [PATCH 35/35] x86: make 32bit apic flat to physflat switch like 64bit Yinghai Lu
2010-02-11 16:14 ` [PATCH -v7 0/35] tip related: not use bootmem for x86 Ingo Molnar
2010-02-11 21:10   ` Yinghai Lu
2010-02-15  2:27 ` Benjamin Herrenschmidt
2010-02-15  4:50   ` Yinghai Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1265793639-15071-18-git-send-email-yinghai@kernel.org \
    --to=yinghai@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=cl@linux-foundation.org \
    --cc=hpa@zytor.com \
    --cc=jbarnes@virtuousgeek.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=tglx@linutronix.de \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).