From: Maxim Levitsky <maximlevitsky@gmail.com>
To: David Woodhouse <dwmw2@infradead.org>
Cc: Artem Bityutskiy <dedekind1@gmail.com>,
linux-mtd <linux-mtd@lists.infradead.org>,
linux-kernel <linux-kernel@vger.kernel.org>,
Alex Dubov <oakad@yahoo.com>, joern <joern@logfs.org>,
Thomas Gleixner <tglx@linutronix.de>,
"stanley.miao" <stanley.miao@windriver.com>,
Vitaly Wool <vitalywool@gmail.com>,
Maxim Levitsky <maximlevitsky@gmail.com>
Subject: [PATCH 01/14] MTD: create unlocked versions of {get,put}_mtd_device
Date: Wed, 17 Feb 2010 23:49:11 +0200 [thread overview]
Message-ID: <1266443364-4538-2-git-send-email-maximlevitsky@gmail.com> (raw)
In-Reply-To: <1266443364-4538-1-git-send-email-maximlevitsky@gmail.com>
Use these only if you know that you already hold mtd_table_mutex
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
---
drivers/mtd/mtdcore.c | 60 ++++++++++++++++++++++++++++++----------------
include/linux/mtd/mtd.h | 3 +-
2 files changed, 41 insertions(+), 22 deletions(-)
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index c356c0a..3bdb7e8 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -453,27 +453,38 @@ struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num)
ret = NULL;
}
- if (!ret)
- goto out_unlock;
-
- if (!try_module_get(ret->owner))
- goto out_unlock;
-
- if (ret->get_device) {
- err = ret->get_device(ret);
- if (err)
- goto out_put;
+ if (!ret) {
+ ret = ERR_PTR(err);
+ goto out;
}
- ret->usecount++;
+ err = __get_mtd_device(ret);
+ if (err)
+ ret = ERR_PTR(err);
+out:
mutex_unlock(&mtd_table_mutex);
return ret;
+}
-out_put:
- module_put(ret->owner);
-out_unlock:
- mutex_unlock(&mtd_table_mutex);
- return ERR_PTR(err);
+
+int __get_mtd_device(struct mtd_info *mtd)
+{
+ int err;
+
+ if (!try_module_get(mtd->owner))
+ return -ENODEV;
+
+ if (mtd->get_device) {
+
+ err = mtd->get_device(mtd);
+
+ if (err) {
+ module_put(mtd->owner);
+ return err;
+ }
+ }
+ mtd->usecount++;
+ return 0;
}
/**
@@ -524,14 +535,19 @@ out_unlock:
void put_mtd_device(struct mtd_info *mtd)
{
- int c;
-
mutex_lock(&mtd_table_mutex);
- c = --mtd->usecount;
+ __put_mtd_device(mtd);
+ mutex_unlock(&mtd_table_mutex);
+
+}
+
+void __put_mtd_device(struct mtd_info *mtd)
+{
+ --mtd->usecount;
+ BUG_ON(mtd->usecount < 0);
+
if (mtd->put_device)
mtd->put_device(mtd);
- mutex_unlock(&mtd_table_mutex);
- BUG_ON(c < 0);
module_put(mtd->owner);
}
@@ -569,7 +585,9 @@ EXPORT_SYMBOL_GPL(add_mtd_device);
EXPORT_SYMBOL_GPL(del_mtd_device);
EXPORT_SYMBOL_GPL(get_mtd_device);
EXPORT_SYMBOL_GPL(get_mtd_device_nm);
+EXPORT_SYMBOL_GPL(__get_mtd_device);
EXPORT_SYMBOL_GPL(put_mtd_device);
+EXPORT_SYMBOL_GPL(__put_mtd_device);
EXPORT_SYMBOL_GPL(register_mtd_user);
EXPORT_SYMBOL_GPL(unregister_mtd_user);
EXPORT_SYMBOL_GPL(default_mtd_writev);
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 0f32a9b..662d747 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -290,8 +290,9 @@ extern int add_mtd_device(struct mtd_info *mtd);
extern int del_mtd_device (struct mtd_info *mtd);
extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
+extern int __get_mtd_device(struct mtd_info *mtd);
+extern void __put_mtd_device(struct mtd_info *mtd);
extern struct mtd_info *get_mtd_device_nm(const char *name);
-
extern void put_mtd_device(struct mtd_info *mtd);
--
1.6.3.3
next prev parent reply other threads:[~2010-02-17 21:52 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-17 21:49 [PATCH 0/14 V9] Work to enable SmartMedia/xD support in mtd Maxim Levitsky
2010-02-17 21:49 ` Maxim Levitsky [this message]
2010-02-17 21:49 ` [PATCH 02/14] blktrans: remove mtd_blkcore_priv and switch to per device queue and thread Maxim Levitsky
2010-02-17 21:49 ` [PATCH 03/14] blktrans: Hotplug fixes Maxim Levitsky
2010-02-17 21:49 ` [PATCH 04/14] MTD: call the remove notifiers before assuming it is in use Maxim Levitsky
2010-02-17 21:49 ` [PATCH 05/14] blktrans: allow FTL drivers to export sysfs attributes Maxim Levitsky
2010-02-17 21:49 ` [PATCH 06/14] MTD: nand: make suspend work if device is accessed by kernel threads Maxim Levitsky
2010-02-17 21:49 ` [PATCH 07/14] MTD: nand: make MTD_OOB_PLACE work correctly Maxim Levitsky
2010-02-17 21:49 ` [PATCH 08/14] MTD: nand: cleanup the nand_do_write_ops Maxim Levitsky
2010-02-17 21:49 ` [PATCH 09/14] MTD: nand: make reads using MTD_OOB_RAW affect only ECC validation Maxim Levitsky
2010-02-17 21:49 ` [PATCH 10/14] MTD: nand: add ->badblockbits to specify the minimum number of bits in bad block byte to consider the block good Maxim Levitsky
2010-02-17 21:49 ` [PATCH 11/14] MTD: common module for smartmedia/xD support Maxim Levitsky
2010-02-17 21:49 ` [PATCH 12/14] MTD: add few workarounds to nand system for SmartMedia/xD chips Maxim Levitsky
2010-02-17 21:49 ` [PATCH 13/14] MTD: Add new SmartMedia/xD FTL Maxim Levitsky
2010-02-19 21:19 ` [PATCH] " Maxim Levitsky
2010-02-17 21:49 ` [PATCH 14/14] MTD: Add nand driver for Ricoh xD/SmartMedia reader Maxim Levitsky
2010-02-20 20:27 ` [PATCH 0/14 V9] Work to enable SmartMedia/xD support in mtd Maxim Levitsky
2010-02-20 20:45 ` Artem Bityutskiy
2010-02-20 22:19 ` Maxim Levitsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1266443364-4538-2-git-send-email-maximlevitsky@gmail.com \
--to=maximlevitsky@gmail.com \
--cc=dedekind1@gmail.com \
--cc=dwmw2@infradead.org \
--cc=joern@logfs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=oakad@yahoo.com \
--cc=stanley.miao@windriver.com \
--cc=tglx@linutronix.de \
--cc=vitalywool@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).